McAlpine Boss Pipe Connectors - Product Demo with Fred

Here’s Fred giving a product demonstration of the Grey Mechanical Soil Pipe Boss Connector and the Pipe Clamp and he’s got lots of great insight and tips about these products so watch and learn!
Want to check out the product information and tech drawings of these Boss Pipe Connectors? Go to bit.ly/42PgqQZ or enter the following product codes in our online catalogue at mcalpineplumbing.com
Product:
Grey Mechanical Soil Pipe Boss Connector for 57mm hole saw size, supplied with fixing tool and suitable for 4"/110mm soil pipe
Product Codes:
🟥 4" x 1¼" - BOSSCONN110-GR
🟥 4" x 1½" - BOSSCONN110T-GR
🟥 4" x 2" - BOSSCONN110Z-GR
🟥 3" x 1¼" - BOSSCONN82-GR
🟥 3" x 1½" - BOSSCONN82T-GR
🟥 3" x 2" - BOSSCONN82Z-GR
Pipe Clamp to suit 1¼"/1½" Pipe to BS EN 1451-1:2017 and BS EN 1329-1:2020
Product Codes:
🟥 Grey - CLAMP1GR
🟥 White - CLAMP1WH
Connect with McAlpine! 👋
Website: mcalpineplumbi...
Facebook: / mcalpineplumb
Instagram: / mcalpineplumb
Twitter: / mcalpineplumb
LinkedIn: / mcalpine-&-co
TikTok: / mcalpineplumbing_
#mcalpine #plumbing #bossconnector

[@AlexRocks24-7]

Thank you for making our work much easier

[@actorlyric]

What he didnt show you was how bulky it is inside the soil stack with possible issues of build of products such as loo paper effluent if it's fitted below the soil appliances. It also doesn't take into account the build up of scale etc inside the soil pipe so when tightening up the boss pipe and that internal isn't really clean uou could end up with it leaking!
With a standard glued boss pipe their is no intrusion inside the soil pipe itself so no risk of snagging of loo paper etc. In cases say in high use flats where water is constantly being discharged down the stack then its a good solution .

[@hufartd]

Mon the Fred.

[@SuperWayneyb]

🤘😎🤘

[@darreldudley8432]

Would one of these work on a lead pipe?

[@mcalpineplumb]

This is not something it has been tested on, but essentially it will seal on the inside of any 57mm hole provided the back plate is of a similar profile as the pipe it's fitting to.

[@darreldudley8432]

@@mcalpineplumb I have just finished the job with the 4" lead pipe and the mechanical boss, and can confirm that it works.