You’ve always been the goat, but remembering to come back and tell us what that fan came from is what really sets us up to list you as our favorite TH-camr. The amount of stuff I’ve learned over the years (been around since the green R32 skyline and budget hatch days) and applied to my builds and techniques is not even measurable anymore. Thanks for being the best.
Wow, seeing Ludwick's bagged out BMW & Auto Union patina cars in the same ep as the fresh painted coupe is a trip. Go to John's channel and check out the bus journey with his Dad, if it puts the hook in you his euro road trips are AMAZING.
The fuchsia goes SO hard 🤌🏼 Personally I’m a fan of the pink wheels, but some endless blue brakes would really add to the accents, maybe not endless brakes themselves, but that shade of blue 👌🏼 ALSO, still here waiting to see a 1UZ project 👀
i've always loved watching Jimmy and Crew doing engine, clutch, trans, etc. installs. It's so chill, well explained and relaxing to watch, everytime. Even though the work is not chill and relaxing, have done it a couple times.
I've been following John on Instagram almost as long as I've been watching you. I've been watching you Tommy and Rudnick for nearly 8 years. since before He was heavy on TH-cam.
EVERYDAY is a GREAT DAY when we get a NEW JIMMY OAKES VIDEO ! The S13 is looking dope bro but it should have been royal purple instead of that S15 color !
Hi! I just share a piece of information on internal slaves, take it as you wish! When you say you had heat issues on the slaves, rings my bell on issues heat triggered, not heat caused. Internal slaves have a very specific orientation to respect if you want to be able to bleed it fully from air. If you can't put at the recomended orientation (usually found on the manufacturer website, in installation drawing section) you then need to bench bleed the slaves to purge any air out. If you don't, when the slave heats up, you struggle to engage gears and decouple the transmission from wheels and let's say, mistakenly assume you have heat issues when in fact is bleeding issues made worse by heat.
I just bought that same torque wrench a few weeks ago and yes there is a setting for that. I think out of the box it alerts you at 50% of the torque setting
Hell yeah! Germain car with Japanese motor and American transmission 💪🏽. Seems like you have the best combo right there for a really great drift weapon can’t wait to see it rip!! Keep the great videos coming 🤘🏽!
I'm shocked that's not 93'ish Saturn plum, as I worked for them waaaaaay back when. I can't believe I've been tuning in for OVER 5 years via your ORIGINAL garage loft video!
I'm not normally one to comment, but that segment with your friend was super interesting/entertaining. It'd be sick if you'd do more on camera covering your friends' cool cars!
Jimmy please try putting the gearbox in gear and twisting the output shaft so the input shaft splines drop in you will have a much easier time. I use an old tailshaft yoke or the whole tail shaft.
i had an Efan off a john deere gator on a jeep i had it pulled 2500 or 3000 CFM and was maybe 3 inches thick was like 50 bucks tractor parts are underrated imo
@16:38, nline oil cooler for clutch line. just like a power steering coooler? long as its rated for pressure youre golden. pressing the pedal will flow brake fluid through the cooler from normal use. then air flowing over the cooler while driving will helptoreduce the heat of the fluid via heat thransfer through the surfacearea of the cooler.ie. no more clutch pedal fade
Fun fact; the BMW logo as shown on the 700 and as it still is today is the image of a rotating plane propeller. BMW (Bayerische Motor Werke) started out as an engine manufacturer for first world war propeller planes. Hence their name and logo.
i also live by own 2 or 3 to keep a clean one, i literally told adam to do that yesterday about his cream s13, to get another usa cream s13 so he can rip n leave the special one at home
BRO GET THE PERANUMATIC ENGINE CRAIN UPGRADE FROM HOBO FRIEGHT! ITS A GAME CHANGER WHEN PULLING ENGINES! That hose on the ram makes it easier to move the load by being next to it. Not needing to pump and move makes it so much better
Just got my shirt delivered and can you guess.....YES got a plaque and stickers too i wasn't expecting so siked man cant thank you guys enough. Keep rockin that content cya in the next video lol
Tbh when the pro car, the purple S13 and the E36 are done we need a OG S13 coupe restoration back to how it was :) Since the OG Coupe is just your mascotte of the channel together with the LSZ
I’ve never had luck with 3mm air gap. As the clutch beds in. 3mm goes away real quick . Have had the best luck with 8mm and the clutches will wear down and won’t fail prematurely
Thanks for having us, man! It was great seeing you and the boys! We’ll make it happen more often when I’m back home in the northeast!
The northeast misses you bro!
So stoked to see you pop up! Love your channel and work! Keep killing it.
I absolutely loved the cars, man! Thanks for showing them.
You got a new subscriber from me, those cars are sick. Also hoping there’s content on your truck, that thing is clean!
Thanks for the knowledge - both cars slap
I spy with my little eye, a dusty is300 hidden in the back
That’s carters, it’s getting 1jz swapped. I dont remember his channel name though
check dj’s recent video he talks about it. should sub to him too for background stuff
What is caters TH-cam?
He's not dropping along the way. He's building, filming, editing and going to drop the entire build start to finish 😑
Watch dj channel an you'll get more information on that car I think it's is recent video
i love that brian always show up with food at the shop
Purple is underrated. That color also reminds me of BMW Twilight Purple and Porsche Viola Metalic.
I'm glad to see John get some more love from the bigger channels. He's probably my favorite channel on youtube at the moment.
I really appreciate that, man! Thank you!
We need to see more John and Jimmy collabs. Some of my favorite creators.
Old Audis are a treat as an oldtimer! They look super cool and are just wildly rare even here in Germany
Thise two cars are SICK! BBS wheels from 1978?! Never knew BBS was around in the late 70s but also dont know shit about them. Sick as hell man
I met John about 6 years ago at Players Classic at Goodwood - legend
You’ve always been the goat, but remembering to come back and tell us what that fan came from is what really sets us up to list you as our favorite TH-camr. The amount of stuff I’ve learned over the years (been around since the green R32 skyline and budget hatch days) and applied to my builds and techniques is not even measurable anymore. Thanks for being the best.
20:02 very cool information about BMW
Pink wheels for sure ❤
Wow, seeing Ludwick's bagged out BMW & Auto Union patina cars in the same ep as the fresh painted coupe is a trip.
Go to John's channel and check out the bus journey with his Dad, if it puts the hook in you his euro road trips are AMAZING.
Seen these cars at riverside chattanooga. Super cool!
And John’s cars! Too cool!
Sick seeing Ludwick’s cars on here. Followed that dude for years
I remember seeing his bmw 700 at h2oi back in like 2019 soooo cool in person
John is absolutely the kind of cat I'd love to work with. Similar styles.
I like the pink wheels
Hell yeah I’ve been following John’s builds he is gangsta as. The Auto Union is sick BMXers building cars is my jam.
the happy gilmore clip was pure gold
Ludwick is the man. Fucking love his cars.
Ludwick Chattanooga boy represent!
Those rare as hell barn fine or like he said in wood fine awesome to see how it's come out in the end
That grape jolly rancher color is so hard!
The fuchsia goes SO hard 🤌🏼
Personally I’m a fan of the pink wheels, but some endless blue brakes would really add to the accents, maybe not endless brakes themselves, but that shade of blue 👌🏼
ALSO, still here waiting to see a 1UZ project 👀
Love hearing this history about these car definitely tuning into his channel didn't not no that where Audi came from
Pink wheels looks great 👍🏽
that autounion is fucking sick. definetly one of the cars you would just like to have around.
Jimmy’s content is so good. It’s fun to watch as well as informative and educative. Favorite part of my nights is watching oakes garage video
I like it with the pink wheels
John is the man! Jimmy and john link up is soo needed
Jimmy needs to invest in a pneumatic jack for the engine hoist
especially for when dj’s around
He needs to invest a lot of little things in that garage if we’re being honest.
i've always loved watching Jimmy and Crew doing engine, clutch, trans, etc. installs. It's so chill, well explained and relaxing to watch, everytime. Even though the work is not chill and relaxing, have done it a couple times.
Lunch time is always better when Jim drops a vid
Facts
Looks like a Karmen Ghia
The Audi and bmw are so cool. Wow 😮
I've been following John on Instagram almost as long as I've been watching you. I've been watching you Tommy and Rudnick for nearly 8 years. since before He was heavy on TH-cam.
Bronze wheels would go pretty hard with that color!
Pink wheels slap hard on the purple!
Love johns channel and his builds
I didn't think I was going to like the pink and the purple. But, it looks soooo good. Can't wait to see it with the rest of the panels
Pink! wheels all the way!!!!! The pink accents 🤌🏻🤌🏻
so stoked to see John on the channel, he's amazing!
Those 2 cars are so sick!!
Pink wheels look sick.
I think you should order a set of pink wheels. And the spares yellow and blue
Funny how after watching Ludwicks channel I turned to watch Oakes and lo behold
Nah man the pink wheels go hard 👌🏻🤘🏻
EVERYDAY is a GREAT DAY when we get a NEW JIMMY OAKES VIDEO ! The S13 is looking dope bro but it should have been royal purple instead of that S15 color !
NHs very own! johns the man
It's so cool that your tow rig is also old nice obs ford
Hi!
I just share a piece of information on internal slaves, take it as you wish!
When you say you had heat issues on the slaves, rings my bell on issues heat triggered, not heat caused.
Internal slaves have a very specific orientation to respect if you want to be able to bleed it fully from air.
If you can't put at the recomended orientation (usually found on the manufacturer website, in installation drawing section) you then need to bench bleed the slaves to purge any air out.
If you don't, when the slave heats up, you struggle to engage gears and decouple the transmission from wheels and let's say, mistakenly assume you have heat issues when in fact is bleeding issues made worse by heat.
The transition sound effects at 18:57, nice one Austin🙂↕️
Bronze TEs for the win. Telling Brian to clock in was killer!
Every video with Brian makes me laugh such a funny dude
Damn, almost no orange peel. Few nibs but not bad for a paint job right out the booth!
It’s definitely a vibe, a vibe we all can agree on is tough AF!
Jimmy and gang, y'all rock! Love all of the car content, especially ones that have been here 50 or 60 years. Peace
That is great, love auto history lessons I will definitely go subscribe
Wooooo! Air cooled content!!! John does great work. I want that type 3 engine in my type 3
I just bought that same torque wrench a few weeks ago and yes there is a setting for that. I think out of the box it alerts you at 50% of the torque setting
Hell yeah! Germain car with Japanese motor and American transmission 💪🏽. Seems like you have the best combo right there for a really great drift weapon can’t wait to see it rip!! Keep the great videos coming 🤘🏽!
The S13 is going to look insane with a kit and a livery. Love to see the vision coming together.
A set of Blitz would hit so hard on the freshly painted coupe, I know you have them on ice
I hope a ls1-2-3 is going back in when the jz goes 🙏
I'm shocked that's not 93'ish Saturn plum, as I worked for them waaaaaay back when. I can't believe I've been tuning in for OVER 5 years via your ORIGINAL garage loft video!
The video references in this are top notch💯
I'm not normally one to comment, but that segment with your friend was super interesting/entertaining. It'd be sick if you'd do more on camera covering your friends' cool cars!
Jim you should get some mini splits for the shop. It’ll help keep it cool and also can use in the winter for heat.
Hell ya Ludwick! We need a collab or something
Grannas racing used to be located in my home town good people and crazy cars!!
Looks like my Purple Fc! love the color!
Jimmy please try putting the gearbox in gear and twisting the output shaft so the input shaft splines drop in you will have a much easier time. I use an old tailshaft yoke or the whole tail shaft.
Jimmy come to complex union Roll Call with @JohnLudwick next year!
E36 content never gets old. Hopefully the new drivetrain stays together. Jz is gonna be so good in it
You are a magician! Love the content brother!
i had an Efan off a john deere gator on a jeep i had it pulled 2500 or 3000 CFM and was maybe 3 inches thick was like 50 bucks tractor parts are underrated imo
I think the pink wheels go crazy
The deep fuchsia was definitely the move. Such a beautiful color🔥
I think the car needs a set of chrome wheels to set it off. Jimmy don’t sleep. 🤙🏻
@16:38, nline oil cooler for clutch line. just like a power steering coooler? long as its rated for pressure youre golden. pressing the pedal will flow brake fluid through the cooler from normal use. then air flowing over the cooler while driving will helptoreduce the heat of the fluid via heat thransfer through the surfacearea of the cooler.ie. no more clutch pedal fade
Fun fact; the BMW logo as shown on the 700 and as it still is today is the image of a rotating plane propeller. BMW (Bayerische Motor Werke) started out as an engine manufacturer for first world war propeller planes. Hence their name and logo.
i also live by own 2 or 3 to keep a clean one, i literally told adam to do that yesterday about his cream s13, to get another usa cream s13 so he can rip n leave the special one at home
I like the color glad you went different then black or red or yellow but yellow would have been 🔥
Love the Ludwick cameo! Collab?!?!
The purple goes hard
BRO GET THE PERANUMATIC ENGINE CRAIN UPGRADE FROM HOBO FRIEGHT! ITS A GAME CHANGER WHEN PULLING ENGINES! That hose on the ram makes it easier to move the load by being next to it. Not needing to pump and move makes it so much better
BMW started with airplanes. That’s why the symbol looks like a propeller spinning with the sky in the background
Just got my shirt delivered and can you guess.....YES got a plaque and stickers too i wasn't expecting so siked man cant thank you guys enough. Keep rockin that content cya in the next video lol
love that color so much
Love the color, but a BREEZY styling would have been sick!
JimmyO X BREEZY S13 would be dope, all the breezy boys need a breezy style drift build
I absolutely love this color combo!!!
The color your looking for is "Black Cherry"... That's my jam.. Harley Davidson is the only company that has this color code from factory.
Golly this is such a dream engine, all the jz’s on marketplace in my area are basically built already. I guess a m50b25 is close enough🤷♂️
ahhhhhh man I can't wait for the livery already!
Jimmy needs to build a 2002
I’m just posted up stoneBaggin with chocolate ice cream and off my anxiety meds chillllin, Jimmy and the Bois killing it like always 🔫
White wheels would go so crazy with this setup
Tbh when the pro car, the purple S13 and the E36 are done we need a OG S13 coupe restoration back to how it was :) Since the OG Coupe is just your mascotte of the channel together with the LSZ
Its my 26th Birthday today, thank you for the video :)
I’ve never had luck with 3mm air gap. As the clutch beds in. 3mm goes away real quick . Have had the best luck with 8mm and the clutches will wear down and won’t fail prematurely