ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Ceiling Fans at Zaxby’s (fan demonstration)
ฝัง
- เผยแพร่เมื่อ 27 เม.ย. 2024
- Recorded on April 9th, 2024.
Fan names: 7 52” Harbor Breeze Springfield II’s and 7 52” Harbor Breeze All Weather’s.
[I decided to demonstrated those fans on all speeds there, but there were 4 fans I didn’t demonstrate on all speeds because they had a broken fan chain, one of them has a missing motor screw and I only show it on 1 speed.
There wasn’t many customers there, so that’s why I demonstrated those fans on all speeds, but I did some at different time because one customer were eating for a little bit, but when they left, I decided to demonstrate the rest.]
Fan information:
1. 7 52” Harbor Breeze Springfield II Ceiling Fans.
Those fans were up since around 2013 when they closed in the 2 eating porches. There used to be 2 eating porches since 2001 and they used to be 7 old black ceiling fans outside with a dome light kit, I think they are harbor breeze calera all weathers but I’m not exactly sure. There were 4 on one side and 3 on the other side like where the Springfield II’s are.
Those 7 fans are in Brushed Nickel finish, has 5 Natural blades, they have a 4 lights light kit, and those fans are from around 2013 when they closed in the 2 eating porches.
The 2nd one has a bad capacitor.
The 6th one has a stuck light chain and it’s stuck off, and it has a broken fan chain and it’s stuck on high speed.
The 7th one has a broken light chain and it’s stuck on.
The 6th one has a harbor breeze light pull chain on the light and the 7th one has a harbor breeze light pull chain on the fan, and the rest has 2 original harbor breeze light and fan pull chains.
2. 7 52” Harbor Breeze All Weather Ceiling Fans.
Those fans are original to the building.
Those 7 fans are in Black finish, has 5 glossy Black blades, they don’t have a light kit, and those fans are from 2001 when Zaxby’s was built.
The 1st, 2nd, and the 5th ones they have a broken fan chain and they are stuck on low speed.
The 4th one has a missing blade screw so it only needs to be on low.