How to build an animated wipe using a macro / Grass Valley Korona

How to build an animated wipe using a macro / Grass Valley Korona
These instructions will vary depending on how your switcher is actually set up and where your sources are located.
Step 1 make sure all keys are turned off.
Step 2 select the macro button on the stripe.
Step 3 select the record option on the stripe's LCD.
Step 4 select a blank macro, once pressed make sure it is blinking.
Step 5 turn on Key 3.
Step 6 assign Key 3 to Image Store 1 (do this by holding down the second shift button on the stripe, the Key 3 delegation button, then select image Store 1.)
Step 7 set up image store 1 in the main menu (to do this select image store, image and movie. Then select image Store 1, the clip you want to play, cue to beginning then click play.
Step 8 select the macro button it on the stripe again.
Step 9 select insert delay and insert a one second delay. When you press the insert delay button you will see the display change underneath the macro buttons to timing.
Step 10 select the insert delay button again to exit the delay settings.
Step 11 click the cut button.
Step 12 click insert delay again, this time insert a delay of nine frames.
Step 13 select the insert delay button again to exit the delay settings.
Step 14 turn off Key 4.
Step 15 click stop recording then test your macro.
► Help Me Reach 10,000 Subscribers Click to Subscribe! ► bit.ly/SubToSamA
My Amazon Store: www.amazon.com/shop/samangello
Follow me on Twitter: / samangello
Follow me on Instagram: / samangello
Follow me on Facebook: / samangello23
Follow me on linkedin: / samangello
Join Team Samurai and subscribe today: bit.ly/SubToSamA
Visit My Websites (Murch coming soon)
www.samangello.com
www.angelloproductions.com
Send Mail To:
257 Northfield Road
Bedford Oh, 44146
Thanks for watching!

[@lukecallaghan6601]

You've honestly taught miles better than GV themselves this, thanks so much for the fantastic explanation!

[@SamAngello]

Happy to help!

[@djbone94]

hello ! Why you click on 2nd shift before assigning the source to the key ? just holding the key and a source doesn't assign allready it to the key ? ( i have understood after, it's not for the key but for the source that is on the second bar)
thanks for the explanation. I use almost all video mixer but kahuna is really hard to understand for me

[@user-hr4up7su5r]

I am having issues importing an image via USB device. Can you help with this?