Thank you for the video ! Which Makita metal chuck reference should I use for this machine? I would prefer a mono to a double ring one. Thx in advance !
I'm in the US & have this drill but it's called the XPH12. I noticed you fitted an accessory handle briefly during the test. Is that the same handle that comes with the XPH07/481 & does it fit the XPH12/484?
@@rudydevylder8890 Appreciate the response, ty. Most likely going to purchased this drill regardless, seems like it'll do the occasional light masonry work in a pinch, instead of lugging a SDS around.
Yo tenía el DHR171, es muy malo para mi. Solo 650 rpm, poca velocidad. DHR171 is a shit. The best: - DHR182, brushless de bajo peso e increibles prestaciones. También los más pesados: DHR243, 18v brushless, perfecto. DHR264, Lo tengo y es muy pesado, es de dos baterías de 18v. Si quieres algo ligero y potente DHR182 es la mejor elección. Yo soy profesional de más de 20 años y trabajo con Makita. Saludos
I was originally thinking of going for the Metabo BS 18 Compact. On paper it has a higher torque. But now I'm leaning towards the Makita. Which one would you recommend?
all depends on what you want the tool to do, speaking on impact drivers i bought a dewalt because it has so much more torque than other brands, i was able to work faster because of it, but it burnt out after 1.5 years of use, im going with makita next as they apparently have better quality so it may last longer, I shall see but at the end of the day its what you want the tool to do ad if you can afford to buy a new one a year or 2 later once it breaks
Hello Cary!
Very cool video, thanks for sharing your experiences in English with us.
Greetings from Brazil
Thanks,
Ben
Thank you BEN!!!
Thank you for the video ! Which Makita metal chuck reference should I use for this machine? I would prefer a mono to a double ring one. Thx in advance !
Can you replace the chuck for a metal one?
I'm in the US & have this drill but it's called the XPH12. I noticed you fitted an accessory handle briefly during the test. Is that the same handle that comes with the XPH07/481 & does it fit the XPH12/484?
It maybe. I have this 484 looking into getting the handle as well
Cary is da bomb! 😁👍👍👍👍👍😁✌🏻
Thank you George~~~~~
Thanks for the review. Now as the other commenters were asking, where can we buy the metal chuck?
we have some very good quality one here
Thank you ….. very very nice video :-)
Greetings from Italy
wonder how it performs on brick and concrete
I would say, it's doable but nothing fancy toward brick. Noway for concrete
Hi, very informative video, what could you say, this makita or dewalt dcd 796 ? Which is better in your eyes ?)
dewalt is stronger, more torque
@@musmanov4642 Also, much more vibration and cheap plastic.
Hello, Is there an original metal chuck for the DHP 484?
it can easily be replace by metal chuck once worn out
@@MASTERALLEY any idea what model?
@@rudydevylder8890 Did you find a metal chuck & if so, could you please link it, thank you.
@@JustinMurray170fin no, stopped looking after a while to be honest.
@@rudydevylder8890 Appreciate the response, ty.
Most likely going to purchased this drill regardless, seems like it'll do the occasional light masonry work in a pinch, instead of lugging a SDS around.
Pls. Sir I need a reply. Thank you very much
Very good my brother😀💪💪💪👍👍👍
Thank you~
Hey Cary, I love your videos!
Could you review the Makita DHR171?
Thanks
let me try to get one and do review on it
Yo tenía el DHR171, es muy malo para mi. Solo 650 rpm, poca velocidad. DHR171 is a shit.
The best:
- DHR182, brushless de bajo peso e increibles prestaciones.
También los más pesados:
DHR243, 18v brushless, perfecto.
DHR264, Lo tengo y es muy pesado, es de dos baterías de 18v.
Si quieres algo ligero y potente DHR182 es la mejor elección.
Yo soy profesional de más de 20 años y trabajo con Makita. Saludos
Hello Master Alley, thank you for your helpful videos! Could you please tell me if the side handle from model 481 fits onto model 484?
dear Nisky, I am afraid it doesn't fit on 484 as there is no ring to fit the handle grip...
Hello sir I would like to ask u, which one is better makita dhp 480 or dhp 484?
484
hi cary, im torn between the bosch gsb 18v 60c and the makita dhp484. which do you think is a better drill?
I will choose 484 for sure. Only you need to change the chuck after a few months. Cost around 20.US. I have tried 60C....
hello! may i know where is your shop in hongkong?
I was originally thinking of going for the Metabo BS 18 Compact. On paper it has a higher torque. But now I'm leaning towards the Makita. Which one would you recommend?
all depends on what you want the tool to do, speaking on impact drivers i bought a dewalt because it has so much more torque than other brands, i was able to work faster because of it, but it burnt out after 1.5 years of use, im going with makita next as they apparently have better quality so it may last longer, I shall see but at the end of the day its what you want the tool to do ad if you can afford to buy a new one a year or 2 later once it breaks
Eu não entendi nada doque você falou.
牧田好猛 每次鎖螺絲手指都擋在風扇吸風口 極端測試馬達還沒燒
真的好熱
可以增加中文字幕嗎，聽不懂廣東話，很想了解主持人 介紹所有工具 ，廠牌的性能！
謝謝，我們會盡量嘗試。暫時人手時間都已經到了極限。但我們一定會改進的。
CA 兄你是否曾在這裡讀書和完成學業?
沒有那麼幸運喇
HK$850 (Hong Kong Dollar) equals €97 (5th/July/'20)
好野，正
謝謝魔劍
宅SIR D英文真係好勁
謝謝，努力學習中
Makitas rock!
其實只需要錄廣東話 然後增加中英字幕 標題寫晒中英 同樣可以照顧不同語言。
DHP484 very good 👍⚡ The very very bad review 👎