ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
How To Fix An Extension Cord - Easy DIY Repair
ฝัง
- เผยแพร่เมื่อ 31 ก.ค. 2024
- How to fix an extension cord by adding a new end to it.
Extension Cord End with BOTH ends: amzn.to/3D7DS09
Check out all the stuff we use around the shop on DoItYourselfDad here: amzn.to/2z8Yly0
Check out our other channels:
Budget Outdoor Adventures: Doing the outdoor stuff without breaking the bank: / budgetoutdooradventures
CarDIY, our car repair and Do It Yourself channel: / @cardoityourself
Check out my awesome daughter's kids cooking channel: / @kayleyskitchen
DoItYourselfDad on Facebook: / diyourselfdad
DoItYourselfDad on Instagram: / diyourselfdad
As an Amazon Associate, I earn from qualifying purchases. Clicking on the links above helps support the channel and helps us provide you with more quality content. We thank you for your support.
Extension Cord End with BOTH ends: amzn.to/3D7DS09
Nice tutorial. Straight to the point, easy to follow.
This is one of the best videos I’ve seen and used.
I just got done fixing one of my extension cords with the very same end you used in this video....thanks
Great explanation vide just what I needed to know thank u
Thanks so much, from a do-it-yourself Meme' (grandmother). I have a VERY long, heavy duty (yes expensive) extension cord for my electric mower which my neighbor borrowed and ran over. Thankfully it was injured fairly close to the end of the cord so, once repaired, I will still have enough length to reach the parameters of my lawn. I feel confident now, after watching! This is on today's TO-DO list for sure! :)
Bummer about the cord, you got this!
Thanks, i apreciate your help!
Thanks for the clear directions!
Thank you,pretty well explained.
Thank you for the great explanation on that.
Great job! This is an easy DIY project for most people which can be done safely and saves an expensive cord! Love your content! 🎉
Thank you sir! Just checked out your channel, you've got some quality stuff up there (and a quality beard to boot!)
Wonderful. Clear and easy to follow!
Glad it was helpful!
Wonderful!! Clear and easy to follow!
Glad it was helpful!
The most useful thing in here was showing what was called the "pinch plate" and the wire going underneath it. If you've never done this before, you might think the screw head goes directly onto the wire, but sticking it under the plate makes things easier.
Yay! I needed this!
Glad we could help!
Great video. And good too to make sure you unplug the chord from the receptacle. 😂
Thank you !
Nice
Hey I have a question on your Apple CarPlay video you said if I didn’t have a aux port I can connect the unit to my car via Bluetooth and would I be able to connect my phone to the unit for CarPlay all while it’s set up to the unit
Yes it would, in your case you would have the unit connect to your phone via Bluetooth, then have the unit broadcast to your radio in your car through the FM radio. The unit transmits on an FM channel and you set your radio to that channel.
Great video. I need to replace the male end on a heavy duty 3 prong extension cord. I noticed the ground wire is pink instead of green. Is that common? Thank you.
Interesting, I’ve been run into a pink ground.
I always use an exacto knife and run it down the length of the outer sheath for 1 in and then go around the circumference from there. That way I avoid cutting the insulation on the wires. That requires less talent dexterity wise which I am very lacking in hahaha
Good tip!
Great video, I wanted to know how would I replace my security cameras wires. I have old wires running from inside of my house to the cameras on the outside. I wanted to replace the cameras and maybe use the old wires so it would be easier but not sure because the old wires couldn't handle the new cameras. Thank you for your great information and videos
If they are low voltage wires you should be able to run them for the new camera. If your new camera needs romax wires you’d have to pull the old ones and fish new wire through.
Thank you.
You're welcome!
Hey buddy, the stash?? It's gone......... Haha. Great video, cleaner then mine I made. Haha.
My facial hair changes like the seasons….
Can I replace my cord that has a GFI switch to a regular pigtail like the one you have on your video as long as the same voltage
You can, but you're sacrificing safety by removing the GFI.
how about a 12g extension cord that got cut off away from the plug and now does not work. How to properly connect 2 ends of the wire which is middle of the extension cord.
Do you no longer need an underwrighters knot?
Not with the clamp on these style of cord ends.
Ok
Ouch I wish you would have said to unplug the extension cord first, it freaking shocked me. Lol jk nice video dude
I just repaired both ends of my extension cord with the same plugs😊
No colors on the socket plug!