The speed master intake sits lower. It hits the valley cover bolts and causes it not to seal. You either change the valley cover to an after market with flush mount bolts or grind the stock bolts but they’re really good intakes for a budget build. Better than the ls6
بادرود ما خانوادگی هنوز یه دونه بیوک اسکای لارک سدان داریم در کشور ایران که باورتون نمیشه که هر روز ازش استفاده میکنیم و اون هنوز سالم و محکمه و جالب اینه که چهل و پنج سال پیش در کشور من این ماشین مونتاژ میشده خوشحالم از اینکه شما خاطره سازی کردین واسمون با این اسطوره
Looks like you got yourself a sleeper I'd keep it like that for awhile but definitely save for a good shifter and I'm not sure what transmission you have but I do remember you said T400 and I'm assuming a 10 bolt welded or maybe you can score a ford 8.8 with a true track or Lincoln locker diff with a proper street tuned.
Excellent car choice now you tune it for 1/4 mile with 24 inch rims 24x12 in the rear with 4.11 gear then you will feel the power that's a mean set up and I had the same car 1978 buick skylark love the car bro👍
So, is this a bone stock (other than a camshaft) LS engine? Was the rings gapped for the boost? By the way, I’m not judging or being condescending, I’m cheering you on brother 🙏💪👏👏👏👏
Yeah man (check out some of the early episodes in the playlist build series) stock 4.8 eBay cam and valve springs apparently this motor had 380k miles or so haha
cool build, It sounds like a dog though. I would just put a cheap big block in the car and have the same power If not more. I like what you did though that's a cool build
Would love to see you build a low dollar "supra" 4th gen rs camaro roller LL8 engine Amazon 60lb injectors Amazon turbo Ar5 pontiac solstice manual trans(bolts right up) 00s ford explorer rear end(poor mans 9") And wallah you got yourself a 750 hp ripper for less than a LS build Did I mention they make 750 unopened I can find complete vortec 4200s for 250-350 bucks on marketplace in my home town. ❤ I believe your skills could make it cooler than a supra but all American ❤❤
Wow, I really like that Buick. You’re doing a great job with the car when you’re finished with it. Have fun with the car.
Thanks!
Good to see the budget videos do so well! Good job
This car is so killer 👊🏻
Thanks!
Love The Sleeper Buick! My Uncle sends his regards
Thanks!
Great recipe for cheap thrills!!!
Yes!!!
Really diggin the range of vehicles in the fleet the buicks gonna be a nice addition AND the unibody ford truck...shts gettin real at Rustomod! 🇺🇲
Yeah man!
Heck yea. Good to see that thing drive! We should do a skylark challenge sometime.
Sweet yours looks awesome
@@Rustomod I’ll message you on ig
I love the hubcaps! They look killer caprices (box chevys) too
Thanks !! I love the look
I absolutely love it, and I would love to see you sort it out and hunt some feelings
So freaking sick !
Thanks!
Nice build, looks forward to seeing more.
Passenger turbo flange is missing a bolt🤙🏼
Super sleeper status
The speed master intake sits lower. It hits the valley cover bolts and causes it not to seal. You either change the valley cover to an after market with flush mount bolts or grind the stock bolts but they’re really good intakes for a budget build. Better than the ls6
Good to know that was probably the issue
بادرود
ما خانوادگی هنوز یه دونه بیوک اسکای لارک سدان داریم در کشور ایران که باورتون نمیشه که هر روز ازش استفاده میکنیم و اون هنوز سالم و محکمه و جالب اینه که چهل و پنج سال پیش در کشور من این ماشین مونتاژ میشده
خوشحالم از اینکه شما خاطره سازی کردین واسمون با این اسطوره
Finish the tune and head to the track? Love to see a pass or two.
That was the goal unfortunately we were told this car needs some metal work before its track worthy it’s pretty rotted
Looks like you got yourself a sleeper I'd keep it like that for awhile but definitely save for a good shifter and I'm not sure what transmission you have but I do remember you said T400 and I'm assuming a 10 bolt welded or maybe you can score a ford 8.8 with a true track or Lincoln locker diff with a proper street tuned.
Definitely it’s a open rear 10 bolt right now rear end will be the next upgrade eventually
Excellent car choice now you tune it for 1/4 mile with 24 inch rims 24x12 in the rear with 4.11 gear then you will feel the power that's a mean set up and I had the same car 1978 buick skylark love the car bro👍
Fog/Driving Lights on the front bumper (bottom side ) just in front of the intercooler drop downs...Keep the Sleeper...
Heck yeah man let's go
That thing needs a T56
A manual would be so cool maybe in version 2
So, is this a bone stock (other than a camshaft) LS engine? Was the rings gapped for the boost? By the way, I’m not judging or being condescending, I’m cheering you on brother 🙏💪👏👏👏👏
Yeah man (check out some of the early episodes in the playlist build series) stock 4.8 eBay cam and valve springs apparently this motor had 380k miles or so haha
@ Bad Azz! 💪
Be careful not to throw it in reverse. Lol but man that's awsome I had a 78 nova same color one time
Hopefully in version 2 we can budget in a better shifter.
Plz take that damn factory column shifter off this drives me nuts when people leave them in there with a floor shifter
Same here
Sounds like a diesel truck why
Not sure maybe the turbos
cool build, It sounds like a dog though. I would just put a cheap big block in the car and have the same power If not more. I like what you did though that's a cool build
Definitely would have been easier
Never seen this car before it looks like a Chevelle and one of those ugly 70s Nova had a kid
Would love to see you build a low dollar "supra"
4th gen rs camaro roller
LL8 engine
Amazon 60lb injectors
Amazon turbo
Ar5 pontiac solstice manual trans(bolts right up)
00s ford explorer rear end(poor mans 9")
And wallah you got yourself a 750 hp ripper for less than a LS build
Did I mention they make 750 unopened
I can find complete vortec 4200s for 250-350 bucks on marketplace in my home town. ❤ I believe your skills could make it cooler than a supra but all American ❤❤
Definitely wanna build a 4200 one day!