Awesome stuff mate hope you do more Volvo stuff cause we are plagued with problems with them and no one know anything about them over here big thumbs up 👍
These engines are famous for the injector harness inside the engine gets brittle .and the insulation comes off then all the wires touch each other the same for mack mp8 and mp7 dealt with alot it even burned some of the ecus
Bad seal cause wiring harness gone bad and will cause injectors missed fire. I replaced my Volvo D13 2018 on 03/27/23 ; Small shop need 5k for parts only (wiring with 2 injectors)Volvo Dealer need 8k for part and labor
What type of computer program you recommend to check the volvo. Mechanics can't find the the problem on my d13. The accelerating pedal will randomly stop work and downshift to 9 gear. I want to start to check it my self.
Hello, I have a question concerning the D13. At the front/top of the motor their is a hose that runs to the driver side, down low. Can you tell me what it is and what is running through that hose? I think it may be leaking, the hose has some abrasions, also, it feels like it might be braided too, I guess kinda like hydraulic lines, but not sure. It is the only hose that runs from the top front of the motor down to the driver side, down low.
So would a bad engine harness cause the a lost in communication to the ECU where the truck will crank but not start and throw bogus fault codes? I have 07 Volvo VED12d and I think the harness may be my issue as well.
Hello, Thanks for your videos, theyre really helpful. I installed Tech Tool and i also have trouble selecting proper options when you go to Diagnose tab. I see that with official version of PTT you dont have to select all the specs of your truck since it does it automatically. Can you help me with what options for Each category i gotta choose for my truck? i got 2020 Volvo VNL860 D13engine I-shift 12 speed transmission.
Hey bullet iam having a problem with my volvo j1939 data link erratic code engine- mid 128 sid 231 fmi 2, transmission- mid 130 sid 231 fmi 2, vehicle- mid 144 sid 231 fmi 2 all come back as j1939
Did you have to replace the ecm or did you clean the ecm connector pins if so which you used to clean it i found alil oil nothing major just trying to see if my ecm still good to use once i replace the engine wire harness
Hey i have a 2012 vnl. Its not doing anything when i try to crank it. Its giving me this message along with check engine light. J1939 communication error with engine ECU. Any idea what could it be?
Where u out of because I’m having issues with my Volvo now I have replace the head and it’s reading 5injector but replace it with a new one and it’s still saying the same thing
I just use tech tool, the Volvo program. There is a lot of smaller little devices that can help read codes and sometimes clear them but I don't have much knowledge about those.
Awesome stuff mate hope you do more Volvo stuff cause we are plagued with problems with them and no one know anything about them over here big thumbs up 👍
Thank you bro I bought 2 Volvo vnl glad I see ur videos bro
These engines are famous for the injector harness inside the engine gets brittle .and the insulation comes off then all the wires touch each other the same for mack mp8 and mp7 dealt with alot it even burned some of the ecus
Oil doesn't conduct electricity but never good when leaks thru the harness. Wonder how did oil travel into the ecm plug in. Thanks for video.
How many dollars was that main wiring harness? Any danger of ECM having oil contamination as well?
Love doing those harnesses
Can't i just change the injector harness, and just connect it to the main harness?
Great video.
How you do "Exit Inducement" to get rid of dash message 5PMH limit.
Damn bro coulda showed us the run down on how to install lol
Bad seal cause wiring harness gone bad and will cause injectors missed fire. I replaced my Volvo D13 2018 on 03/27/23 ; Small shop need 5k for parts only (wiring with 2 injectors)Volvo Dealer need 8k for part and labor
Helpful ❤❤
How many hours does this job take?
Quick question, what size torx socket did you use to remove the black computer box. Is it a special tool to fit through the small hole ?
What type of computer program you recommend to check the volvo. Mechanics can't find the the problem on my d13. The accelerating pedal will randomly stop work and downshift to 9 gear. I want to start to check it my self.
Hello, I have a question concerning the D13. At the front/top of the motor their is a hose that runs to the driver side, down low. Can you tell me what it is and what is running through that hose? I think it may be leaking, the hose has some abrasions, also, it feels like it might be braided too, I guess kinda like hydraulic lines, but not sure.
It is the only hose that runs from the top front of the motor down to the driver side, down low.
I think that's the air line to the bypass valve, it's right after the outlet of the turbo on the aluminum pipe.
So would a bad engine harness cause the a lost in communication to the ECU where the truck will crank but not start and throw bogus fault codes? I have 07 Volvo VED12d and I think the harness may be my issue as well.
Check your battery cables…
@@MrSwordfisher I actually found the issue and since got my truck back running... it was a bad ECU....
Great video, great content!
Hello, Thanks for your videos, theyre really helpful. I installed Tech Tool and i also have trouble selecting proper options when you go to Diagnose tab. I see that with official version of PTT you dont have to select all the specs of your truck since it does it automatically.
Can you help me with what options for Each category i gotta choose for my truck? i got 2020 Volvo VNL860 D13engine I-shift 12 speed transmission.
Hey bullet iam having a problem with my volvo j1939 data link erratic code engine- mid 128 sid 231 fmi 2, transmission- mid 130 sid 231 fmi 2, vehicle- mid 144 sid 231 fmi 2 all come back as j1939
What state are you in?
Did you have to replace the ecm or did you clean the ecm connector pins if so which you used to clean it i found alil oil nothing major just trying to see if my ecm still good to use once i replace the engine wire harness
Hey i have a 2012 vnl. Its not doing anything when i try to crank it. Its giving me this message along with check engine light. J1939 communication error with engine ECU. Any idea what could it be?
Where u out of because I’m having issues with my Volvo now I have replace the head and it’s reading 5injector but replace it with a new one and it’s still saying the same thing
The question is how the heck did the oil make it all through the harness ?
The seals go bad to the connections in the valve cover and travels through the harness.
Where your location? We need a good tech here in Florida
Great video where you located?
Thanks for sharing.
I have a question for you.
Was the new harness OEM or aftermarket?
Thanks
What caused the oil in the harness?
TIME; The age of the harness causes the seals to give out. It's the seals that holds the oil from the actual prongs.
please sir which one do you recommend vocom1 or vocom 2
Please advise on a decent diagnostic tool/software for d13 volvo. I'd really appreciate it
I just use tech tool, the Volvo program. There is a lot of smaller little devices that can help read codes and sometimes clear them but I don't have much knowledge about those.
I have a usb link 2, which adapter does a 2015 volvo require to diagnose?
9 pin green plug
Sir please guide me how to change rpm Volvo TAD 641 GE
👍👍👏👏😃😃
Assalam U Alaikum
Sir
In my tech tool in the diagnose tab there is no option for continue
And not showing diagrams or images
Volume.
Was the ecm still good to use