I just randomly found your channel looking for tips for my own recording and I have to leave a comment bc I checked out a few videos now and I really like your delivery. A lot of channels do those gimmicks and will talk nonsense before getting to the actual tips and also I feel like it’s easy to learn from your channel cos you explain stuff in real talk not all crazy like I would need a degree or something lol so thanks. And also your music is hot lol. I’m subscribed now lol
I accidentally discovered this! My track wasn't recording, I had a very small punch part in it that was limiting to some milliseconds, which I noticed it was there because I just had some tiny recording. I came here to this video, and discovered the auto-punch, which is something I was figuring out how to do but I knew that one day I would discover by accident. Today was that day!
Literally last night I was trying to figure out how to hear the vocal on the track I was punching in on so that I get the same vibe and continuity. Then I finally discovered the autopunch feature after much googling. I should have just waited 12 hours for this video! Haha
This is exactly what i've been looking for for months! You're a sanity saver. haha. I'm similar in that i prefer the duplicate track method. thanks friend. HNY. x
The clearest explanation yet. Thank you very much. "I'll be back" to check out other tips! If you happen to be using the Universal Audio apollo twin interface, please start doing tutorials for that as their tutorials are complete and utter rubbish!
YESSSSSS!!!!!! thank you so much for these videos. I've been recording on logic and learning as i go because youtube tutorials are mostly dudes who blather away for 80% of the video without giving straightforward information. it got to be really frustrating. you are the best teacher I have seen thus far. Thank you for this lesson. Also, your song is super catchy.
you can highlight a section with the marquee tool. then you can set the loop section bigger than the marquee section. now you have a lead-in before it hits the marquee selection and starts recording only the marquee selection. important: for the marquee record to work, make sure “play from marquee” is un-selected from the play options.
@ProduceLikeaBoss Thanks for your help.. #1 Question.. Please tell me you finished this song and have a link available so I could buy it because it sounds 🔥🔥🔥🔥
Is it possible to select multiple takes from the auto punch feature? For example, set it up to auto punch and record on loop a four bar section, record 20 takes, and use 5 of them for doubling, layering, and panning on separate tracks? Thanks!
Yes! You can do exactly that! Just keep recording in the auto-punch with Cycle on, and it will create a comp folder of all your takes! You can edit different ones together for the final take, and you can put all the other ones onto their own tracks afterwards! :)
How do you make it so you can hear yourself before the auto-punch start point? On mine, my signal mutes once I start recording and doesn't come back until the punch point, which is a big problem because I can't get on pitch and into the flow!
I use a UAD interface and it has a console app. I rely heavily on getting my vocal sound inside console app. I don't ever set Logics track Input Monitoring on becuase when I do I hear slap latency and phasing- is there a way to do this without having input monitoring on? I notice when I do NOT have input monitoring on, I still hear the previously recorded vocal while Im trying to punch in, it's awful. Any work arounds?
where im having trouble at is... on every other DAW, when u punch in. u can hear the vocals you've laid down before your punch in section. so everything u said before and after your punch in section should play. but it isn't and its really bothering me. how do I fix this
Punching in is only necessary if you're doing it on the same track. If you're doing it on a separate track, there's no need for it - you can just cut and paste into the final track if you do it that way. :)
@@ProduceLikeaBoss thank you so much, that makes sense! I’m still a newbie to this stuff! I just started using logic a few months ago. I recorded a verse for a song I’m doing and punched in for that verse where I needed 2 and it came out good. Now I need to record/finish verse 2. That means I would record verse 2 on a different audio track right ? And not the same audio track as verse 1 ? I’m confused because I don’t want the verses 2 sound differently from each other in terms of quality.
what I am looiking for and can't seem to find the answer, is when I am doing midi and I am recording, in a loop that it stops recording and I don't hear what I recorded into midi. and its mad annoying.
At 4:30 when you "chop/chop/insert", how do you ensure the audio is pasted in place when dragging the audio without having to use "paste in place" feature?
![[ENGSUB] UNPRODUCTIVE DAY ใช้ชีวิต (เปื่อยๆ) ด้วยกัน 1 วัน! | OUROAD CLOSEFRiEND SS2 EP.9](http://i.ytimg.com/vi/pyYKZ3kra9w/mqdefault.jpg)
This girl can teach! Thank you. Excellent
thank you! :)
This was the only video I found, after a lot of searching, that explained it well and quickly. Thank you and congratulations-
This girl kicks ass! Way to go Kris👦👏
Aw thank you so much!🤗💜
i found what i needed and also found a really nice track! well done
Exactly what I needed, Thank You So Much!
Great video! Clear and concise. Exactly what I needed. Thanks for your personality and style!!
thank you! :)
Great vocals
Thanks so much! :)
I just randomly found your channel looking for tips for my own recording and I have to leave a comment bc I checked out a few videos now and I really like your delivery. A lot of channels do those gimmicks and will talk nonsense before getting to the actual tips and also I feel like it’s easy to learn from your channel cos you explain stuff in real talk not all crazy like I would need a degree or something lol so thanks. And also your music is hot lol. I’m subscribed now lol
Hey Eddie!
Thank you so much for the comment! It means a lot to get such great feedback! I appreciate your kind words! 🙌
Fantastic info! Thanks Kris!!!!
You're so welcome! 😇
Loving your vids chick .. Hope the new year brings more amazing goodness for you
Thanks so much! And same to you!! 😘
I accidentally discovered this! My track wasn't recording, I had a very small punch part in it that was limiting to some milliseconds, which I noticed it was there because I just had some tiny recording. I came here to this video, and discovered the auto-punch, which is something I was figuring out how to do but I knew that one day I would discover by accident. Today was that day!
Literally last night I was trying to figure out how to hear the vocal on the track I was punching in on so that I get the same vibe and continuity. Then I finally discovered the autopunch feature after much googling. I should have just waited 12 hours for this video! Haha
Hahaha doesn't matter how you get there, as long as you get there!
This is exactly what i've been looking for for months! You're a sanity saver. haha. I'm similar in that i prefer the duplicate track method. thanks friend. HNY. x
Omg so helpful. Thanks!!!!
Thanks that was super !!
So Glad you Liked it Greg!! 🥰
The clearest explanation yet. Thank you very much. "I'll be back" to check out other tips! If you happen to be using the Universal Audio apollo twin interface, please start doing tutorials for that as their tutorials are complete and utter rubbish!
Thanks for sharing
Thanks for watching! ☺
Nice explanation!!
YESSSSSS!!!!!! thank you so much for these videos. I've been recording on logic and learning as i go because youtube tutorials are mostly dudes who blather away for 80% of the video without giving straightforward information. it got to be really frustrating. you are the best teacher I have seen thus far. Thank you for this lesson. Also, your song is super catchy.
It's my pleasure! And thank you! :)
you can highlight a section with the marquee tool.
then you can set the loop section bigger than the marquee section.
now you have a lead-in before it hits the marquee selection and starts recording only the marquee selection.
important: for the marquee record to work, make sure “play from marquee” is un-selected from the play options.
thank you!!!!! your video helped me lots!!!!!
yay, so glad to help! :)
Thanks a lot for your tips ♥
Always!! :)
Love it! A few of these techniques I use and one I didn't! Thank you!
Awesome glad it was helpful!
you Rock! Thanks so much for the info
Thank YOU so much for watching David! 🙌
ok, I love you already 🙌
I just *love* your voice!!!!
🤗 Aw thanks so much! 💜💜
THANK YOU!!!!!
@ProduceLikeaBoss Thanks for your help.. #1 Question.. Please tell me you finished this song and have a link available so I could buy it because it sounds 🔥🔥🔥🔥
Is it possible to select multiple takes from the auto punch feature? For example, set it up to auto punch and record on loop a four bar section, record 20 takes, and use 5 of them for doubling, layering, and panning on separate tracks? Thanks!
I'd love to know this, too.
Yes! You can do exactly that! Just keep recording in the auto-punch with Cycle on, and it will create a comp folder of all your takes! You can edit different ones together for the final take, and you can put all the other ones onto their own tracks afterwards! :)
Thanks boss
Any time Martin!
@@ProduceLikeaBoss 👨🏽💻🙌🔥
How do you make it so you can hear yourself before the auto-punch start point? On mine, my signal mutes once I start recording and doesn't come back until the punch point, which is a big problem because I can't get on pitch and into the flow!
How do you paste the tracks with exact measures? thanks
Works a little different in Pro Tools but good to know, thanks!
Haha yeah, it's always going to be a little different!
I use a UAD interface and it has a console app. I rely heavily on getting my vocal sound inside console app. I don't ever set Logics track Input Monitoring on becuase when I do I hear slap latency and phasing- is there a way to do this without having input monitoring on? I notice when I do NOT have input monitoring on, I still hear the previously recorded vocal while Im trying to punch in, it's awful. Any work arounds?
where im having trouble at is... on every other DAW, when u punch in. u can hear the vocals you've laid down before your punch in section. so everything u said before and after your punch in section should play. but it isn't and its really bothering me. how do I fix this
Hey I can't get the X version for my logic, How will I get the X version?
They took the x awsu
Great video, are you supposed to punch in on a different track or the same track? Please help
Punching in is only necessary if you're doing it on the same track. If you're doing it on a separate track, there's no need for it - you can just cut and paste into the final track if you do it that way. :)
@@ProduceLikeaBoss thank you so much, that makes sense! I’m still a newbie to this stuff! I just started using logic a few months ago. I recorded a verse for a song I’m doing and punched in for that verse where I needed 2 and it came out good. Now I need to record/finish verse 2. That means I would record verse 2 on a different audio track right ? And not the same audio track as verse 1 ? I’m confused because I don’t want the verses 2 sound differently from each other in terms of quality.
Nice song. I don't have the punch icon in my logic
what I am looiking for and can't seem to find the answer, is when I am doing midi and I am recording, in a loop that it stops recording and I don't hear what I recorded into midi. and its mad annoying.
At 4:30 when you "chop/chop/insert", how do you ensure the audio is pasted in place when dragging the audio without having to use "paste in place" feature?
As long as the session is set to tempo , you can slide things easily on grid/in time.
This gives a bit more confidence.
Excellent!! :)
Dodger fan? (Say “Yes!”) 😊 💙 ⚾️
Thx for sharing. If you have a second come check out my music videos - I'm a rap artist and think you may dig my sound. Hit me up!