How To Adjust The Air Flow on an OTS Guardian full face mask

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 ส.ค. 2024
  • in this video I explain how to adjust the Air Flow in an OTS Guardian full face dive mask
    #goldmining #otsguardian #divemask #fullfacemask #dredging #golddredging #goldrush #diving #mining #prospecting #goldpanning #regulator #Alaska #goldminer #goldminer #kaylajohanson #ThePeekingDoe #gold

ความคิดเห็น • 18

  • @waynepotts5306
    @waynepotts5306 4 หลายเดือนก่อน +1

    Thanks for the Great Tip !! I just changed over to the OTS Guardian from Ocean Reef last summer !! So great Timing !! :)

  • @rckn-rndlwestvirginiarc4388
    @rckn-rndlwestvirginiarc4388 4 หลายเดือนก่อน +1

    Thanks for the info

  • @kentfackler1997
    @kentfackler1997 4 หลายเดือนก่อน +1

    OMG !!!So much thanks, I have had my OTS mask for 8 years. and was not able to use on myT-80 compressor. A lot of money to have been setting around for sure .So again Thanks !!!

    • @KaylaJohanson
      @KaylaJohanson  4 หลายเดือนก่อน

      No problem! Hope this helps!

  • @sharkman5735
    @sharkman5735 หลายเดือนก่อน

    Thank you!!!

  • @jeremycanterohioprospecting
    @jeremycanterohioprospecting 4 หลายเดือนก่อน +2

    Pretty interesting I work in shallow creeks and streams so all I need is a snorkel mask when you getting out and getting gold

  • @gorillagoldhunters
    @gorillagoldhunters 2 หลายเดือนก่อน

    Awesome! I have the same mask! Thanks for the tips

  • @travisbecker4948
    @travisbecker4948 18 วันที่ผ่านมา

    You don't get this info online because OTS keeps it offline and is info for trained Guardian Techs. I WILL say, as a certified Guardian Tech, myself, part of our procedures for tuning Guardians is to remove the diaphragm/purge button cover first, revealing the forked valve lever. Push your fork lever down to relieve pressure on the nylon valve seat before you start twisting the valve with your screwdriver. If you don't, the pressure of the fork assembly pushing the nylon valve seat against the metal knife edge of that valve you are turning can cut into the nylon, deeper and deeper can can shorten the life of that valve seat and lead to free-flow issues later.
    I wish I could post a photo to show everyone, but I can't seem to post photos.

  • @MartinMcMartin
    @MartinMcMartin 4 หลายเดือนก่อน +1

    With gold price the way it is, you would want all your equipment to be tip top so you can maximize your time under water.

  • @triple_A_rockhound
    @triple_A_rockhound 4 หลายเดือนก่อน

    She also sounds Like bane with it oN😏😂

  • @davidcrowley4790
    @davidcrowley4790 4 หลายเดือนก่อน

    Would you recommend buy a ots mask ? Need to buy a mask not sure what one to buy. Thanks and love the videos.

    • @KaylaJohanson
      @KaylaJohanson  3 หลายเดือนก่อน

      It's is a good mask, but pretty pricey. If you want a more budget friendly option you could also use the Pegasus silicon full face mask

    • @davidcrowley4790
      @davidcrowley4790 3 หลายเดือนก่อน

      @@KaylaJohanson Thanks for the info !!

  • @ThinkingOffTheGrid
    @ThinkingOffTheGrid 4 หลายเดือนก่อน

    Have you ever used any of ocean reef's face masks? If so do you prefer ots over ocean reef?

    • @KaylaJohanson
      @KaylaJohanson  3 หลายเดือนก่อน +1

      I've used both. They both work well

  • @kennethozelie2082
    @kennethozelie2082 4 หลายเดือนก่อน

    Is it the adjustment dredge specific?

    • @KaylaJohanson
      @KaylaJohanson  4 หลายเดือนก่อน +1

      No. It has nothing to do with the dredge itself, but can vary depending on the compressor being used. You may need to open the flow more for air compressors putting out lower air pressure or lessen it for compressors putting out higher air pressure.

  • @shanehodges6980
    @shanehodges6980 4 หลายเดือนก่อน

    You’re so stunning 🤩