A quick how-to on replacing a Nissan Armada blend door actuator. Video isn't the best, but you get the general idea. Thanks for watching and post a like if it helps!
It was hard finding a video online that showed how to access the rear actuator in an Armada/QX56 since mine went out (started clicking). This was perfect and showed me the information that I needed to access it. The removal of the hidden floor compartment (door and lining) revealed a couple of key bolts that needed to be removed that I couldn't figure out before seeing the video. Once done, the actuator change out was the easiest part of the repair compared to removing the various trim pieces that cover it. THANKS AGAIN!
Can't thank you enough man... Your video made it super easy and saved me alot of time! And me the frustration of braking something by accident. Thank you Brother!
Thanks so much for taking the time to do this video! My Armada is exactly like yours and the annoying clicking started a few months ago. Now that I know what it is, it looks like an easy (easy enough) fix!
Great Video! have you had any issues with the lift gate motor? I would assume you could access it the same way you just did the for the blender but on the opposite side.
@@dawveed26 will do! This was a great video , thanks again for making it. Have you seen any videos on the replacing the Blender behind the front display screen?
My 2005 Armada is making the knocking/clicking sound on both front and back…… when I look up the blend door actuator, it’s showing me the same exact part that it gives me for the front actuator down by the pedals, so, is this rear actuator and front actuator the same part for both areas?? Meaning should I both two of the same actuator for both of my problems?
Hello! Does that actuator only regulate the mix of hot or back air? Just curiosity, this Armada actuator is in the same place as in Pathfinder? I have owned Pathfinder since 2007 and it means that it is a european version of the Armada. Thanks
I believe it just mixes air. I'm not knowledgeable of the differences between the armada and pathfinder platforms, but they probably work in a similar fashion.
It was hard finding a video online that showed how to access the rear actuator in an Armada/QX56 since mine went out (started clicking). This was perfect and showed me the information that I needed to access it. The removal of the hidden floor compartment (door and lining) revealed a couple of key bolts that needed to be removed that I couldn't figure out before seeing the video. Once done, the actuator change out was the easiest part of the repair compared to removing the various trim pieces that cover it. THANKS AGAIN!
Can't thank you enough man... Your video made it super easy and saved me alot of time! And me the frustration of braking something by accident. Thank you Brother!
Thanks so much for taking the time to do this video! My Armada is exactly like yours and the annoying clicking started a few months ago. Now that I know what it is, it looks like an easy (easy enough) fix!
My 11-year-old son and I managed to take this on and get it fixed in an hour. Not bad for a mom and son project, huh?! Thanks again!!!
thank you man fot taking the time to show us this
Thank you!!! This was my exact problem!!
Tanks,15 min job your way to do.Best way.Needed 5.5 mm socket and flat screwdriver only.
Thank you very for the video. Helped me a lot!
Bad ask, thanks for the video.
There is some access easer than remove all this stuff so good job for that anyway
Big thanks
Great Video! have you had any issues with the lift gate motor? I would assume you could access it the same way you just did the for the blender but on the opposite side.
Hello! No I haven't, but the procedure may be similar. If you do work on it, let us all know how it went. Good luck!
@@dawveed26 will do! This was a great video , thanks again for making it. Have you seen any videos on the replacing the Blender behind the front display screen?
No, but that doesn't mean they aren't out there😀 Thanks for compliment!
My 2005 Armada is making the knocking/clicking sound on both front and back…… when I look up the blend door actuator, it’s showing me the same exact part that it gives me for the front actuator down by the pedals, so, is this rear actuator and front actuator the same part for both areas?? Meaning should I both two of the same actuator for both of my problems?
Your Armada is five years older than mine, so it may use the same actuator. I know my front ones are different than the rear one
@@dawveed26 aaah, ok thank you, Great video by the way!
Just curious is the roof vents only meant for AC and a floor vents meant for heat in the second row? Or do you get heat from the roof as well
I get heat from the overhead vents as well
I fixed mines by replacing it. It only lasted a month, and started making a different noise that was worse than before
Hello! Does that actuator only regulate the mix of hot or back air? Just curiosity, this Armada actuator is in the same place as in Pathfinder? I have owned Pathfinder since 2007 and it means that it is a european version of the Armada. Thanks
I believe it just mixes air. I'm not knowledgeable of the differences between the armada and pathfinder platforms, but they probably work in a similar fashion.
@@dawveed26 Thank you very much! For the rear seats, it only blows air outside, not hot, not cold.
is all blend door actuator in nissan armada 2010 same ???
I don't think so. The rear actuators are different than the front, from my experience.
Has this part held up? I'm needing to do mine
I've had to replace it once more. Just cheap junk
@@dawveed26 but for 25 bucks lol and this video was made 4 years ago so I guess that's not bad
So, if I’m replacing this and looking on eBay in search, do I enter ; 2011 Nissan Armada blend actuator?
That's what I would do
Thank you!!!!