With all the 011 minis, if you keep the back movable big section at the top, & mount the smaller (not ATX) motherboards in the ITX screw-hole locations, & snip a square in that back big section for the MB I/O panel. You'll gain a ton of space to play with, including able to mount a vertical GPU with Liam Li's kit, & have dual 360 radiators. If the top radiator hits your ram, buy 8 flat brackets from Lowes or Home Depot next to the "L" brackets, but flat. Or two measuring yard sticks, cut, drill, paint, screw, done. Or two strips of wood trim.
the cost of just the fittings in this build would probably get you a semi decent PC. :D Great build, love the new O11 mini air and the double loop is really interesting.
Im literally obsessed with this build so imma answer a few questions from fellow ytubers. Runs: Top FLT goes side rad, to the back(offset) towards the top rad, top rad to CPU, CPU back to pump Bottom FLT goes down along the bottom rad to the back in/out rad, GPU and back to the pump you can get the flow by following the direction of the collant on the CPU/GPU blocks and where its coming from Rads debate: Yes 2 rads for the CPU easily, the GPU + the active backplate with 1 singel PE240 I dont think it ever reaches >40-45c at full blast OC too. I have a 5900x with an 240 EK basic on the same case(side mounted) it handles the CPU well but under full blast it reaches 85c so I can only imagine a better DDC pump plus a 2nd PE240 keeps it at max 65-70c. There is also a massive difference in temps between all cores at 3.9 or 4.3ghz so having a second rad there will get you more performance for the same temps. Air Intake: Having the FLTs instead of 2x140mm changes little to nothing when it comes to watercooling - a MoRa doesnt get any other "fresh air intake" and I believe performs quite well with just the rad fans. Same goes for the o11 mini watercooled - its all glass 0 intakes...great temps with 2x360 One thing i see nobody say is the excellence in cable managing that beautiful box having 2 pumps and 1 lianli controller. GGF the OG!! Masterpiece!
I would prefer this configuration but with the black, no RGB aesthetic of the other one. Maybe a black, copper and silver theme, that would be awesome. This case is amazing!
I really need an inverted version of this case.... Lian Li please make inverted version please for people who have to put the PC on the right side of their desks.
Love how the thing that makes it an _Air_ Mini, the mesh front panel where one would usually put fans, is completely removed from the "air" part of the equation by putting the distro blocks/pumps there.
I can’t find words, this is amazing! I wanna use this case too, for my first custom loop. How u managed to synchronize all the fans, water blocks and pumps?
Man great video again!! I just love your builds! I've been diging through a bunch of them, and I've seen you often use this 180 degress for the gpu power, where I can find them? Also, can I use them on a regular GPU? Or just the ones with WC?
I think it looks more appealing being able to see the top and bottom radiators. However awesome build as always, amazing how so much hardware can fit in that MINI case! 😂🔥🔥🔥🔥🔥🔥🔥
This is awsome I've been looking at this case with a view to do a custom loop in the future. Could i ask though... could i pull the same off with an ATX motherboard? and could i use a corsair cpu water block with the rest of what you have used here. Thanks
Beautiful build. Would you mind sharing where those radiator covers that you are sliding into the top and bottom of the case are from? Are they custom made?
about the back plate of the active water block, and note that ekwb sell it in silver color, where did you get the white version or was it a mod made? 🤔
How'd you fit the PSU? I have a similar system with a 3080ti, but had to re-evaluate and go up to the 011 standard size when I needed more room for an ARX PSU. Wound up going all black rather than all white, not going to lie yours is way more dope... possibly because it was built by a pro rather than me, but hey.
Why 2 rads for cpu and "only" one for gpu been this part the hottets one? Cheers from Argentina 🇦🇷, really love your builds, the Black one is so nice too that i cant choose between them
The way you plan and produce these builds is nothing less than extraordinary. Amazing as always.
Amazing build, incredible camera work. GCF are hard to beat at this game.
That building is the best i´ve ever seen especially when it glows blue and pink.
Blue and pink RGB on a fully white build looks insane
everyone's a critic i know :) ... but wouldn't the 300W GPU benefit more from dual radiators than the 100-140W CPU?
These are showcase builds.
You have impeccable taste in music my friend. Finally a build video that didnt have some ghetto fab hip hop sounding music playing.
So clean!!! The glass front panel from the air wouldve complimented this build so much since it doesnt need that much air flow.. GG
So jealous I didn't wait for the white. Just got my black one yesterday. It's gorgeous but this is unreal. Great job dude.
With all the 011 minis, if you keep the back movable big section at the top, & mount the smaller (not ATX) motherboards in the ITX screw-hole locations, & snip a square in that back big section for the MB I/O panel.
You'll gain a ton of space to play with, including able to mount a vertical GPU with Liam Li's kit, & have dual 360 radiators.
If the top radiator hits your ram, buy 8 flat brackets from Lowes or Home Depot next to the "L" brackets, but flat. Or two measuring yard sticks, cut, drill, paint, screw, done. Or two strips of wood trim.
Lian Li should send those shrouds you built to hide the radiators from the factory!
the cost of just the fittings in this build would probably get you a semi decent PC. :D Great build, love the new O11 mini air and the double loop is really interesting.
Great this gave me an idea for a dual loop in this case now
This whole setup is bad ass. Now I have to find the first build
Stu you seriously got a good eye for pairing specific parts, and once again smashing the aesthetic on this one, big ups.
Most amazing Mini build I have seen yet!
Bro this is by far the best build I have ever seen in this case! Props! How much was the build? Looks like it was over $1000 just on watercooling!
10/10 i'm starting my build in a few weeks
Im literally obsessed with this build so imma answer a few questions from fellow ytubers.
Runs:
Top FLT goes side rad, to the back(offset) towards the top rad, top rad to CPU, CPU back to pump
Bottom FLT goes down along the bottom rad to the back in/out rad, GPU and back to the pump
you can get the flow by following the direction of the collant on the CPU/GPU blocks and where its coming from
Rads debate:
Yes 2 rads for the CPU easily, the GPU + the active backplate with 1 singel PE240 I dont think it ever reaches >40-45c at full blast OC too. I have a 5900x with an 240 EK basic on the same case(side mounted) it handles the CPU well but under full blast it reaches 85c so I can only imagine a better DDC pump plus a 2nd PE240 keeps it at max 65-70c. There is also a massive difference in temps between all cores at 3.9 or 4.3ghz so having a second rad there will get you more performance for the same temps.
Air Intake:
Having the FLTs instead of 2x140mm changes little to nothing when it comes to watercooling - a MoRa doesnt get any other "fresh air intake" and I believe performs quite well with just the rad fans. Same goes for the o11 mini watercooled - its all glass 0 intakes...great temps with 2x360
One thing i see nobody say is the excellence in cable managing that beautiful box having 2 pumps and 1 lianli controller.
GGF the OG!! Masterpiece!
Thank you for the help :D
you have the best toys on the shelves!
Pleaseee, tell me how did you paint radiators? They look like they are factory painted, damnnnn
My black air mini will be here Saturday!
The blue/pink was impressive enough, but when he made it all white, that was just 😍👌
Dang that’s clean. Wish I could buy that as is from you.
I have an O11 Dynamic Mini, but this setup looks fucking outstanding.
The motherboard color white and this pc is full full full amaziiiiing
AMAZING ARTWORK.
Very clean! Love it. Did you use soft tube on the hidden radiator connections in the back? Did you run them through the back?
you can see ZMT at 8:44 top left from the front top rad fitting :p
always love the white creamy stuff in the loop
The cum cooled PC
I don’t comment on videos but you are so original with these builds I’m always in awe
Thank you :)
@@GGFEvents you’re welcome! That dual loop design was really clever I love it.
Probably not enough to cool an i9 13900K and rtx 4090? Absolutely gorgeous build.
I would prefer this configuration but with the black, no RGB aesthetic of the other one. Maybe a black, copper and silver theme, that would be awesome. This case is amazing!
I really need an inverted version of this case.... Lian Li please make inverted version please for people who have to put the PC on the right side of their desks.
I really like your build, I think I will copy it but put the pumps at the back side radiators...
Just. Beautiful.
Where can I get those covers for the radiators
Please do a Winter One.2 build for your next SFF series!! Your are the king, show these other builders how its done
Like the Build !
What's the bracket from the GPU ?
Customized or can we buy it somewhere ?
Best Regards
It is a brand called EK Water Blocks. He use the blocks and pumps from them...
Most of the time
@@lukaselpijon
I know EK I'm sorry haven't precised my question... It was linked to the bracket/cover of the power cables from the GPU
Amazing, as always. Where can I get one of those angled PCI-E adaptors? Looks so clean, although I'd need one that can take 3x8pin..
You should do more content, compare the thermal's on the builds, show us which loop setups work the best and why
Beautiful case like the crystal 680x but with the flaws all taken out
omg, u have so many parts just standing there. spare me one i need it in these desperate times TT
Love how the thing that makes it an _Air_ Mini, the mesh front panel where one would usually put fans, is completely removed from the "air" part of the equation by putting the distro blocks/pumps there.
Yep, wanted to show other options as our first AIR Mini used fans. This is still something you can't do in the non AIR as it's just glass.
Have the same motherboard, great solid B550, mine is working 24/7 with a 12 core Ryzen.
ideal build
I can’t find words, this is amazing! I wanna use this case too, for my first custom loop. How u managed to synchronize all the fans, water blocks and pumps?
love ur builds, it look awsome somehow white case not practical would love to see it as it is in black case. big tumbs up
this build is sick! I was looking into building in the 011 Mini
would you mind giving me a breakdown of different fittings used and qty please?
would like to know as well just to estimate cost of it
Man great video again!! I just love your builds! I've been diging through a bunch of them, and I've seen you often use this 180 degress for the gpu power, where I can find them? Also, can I use them on a regular GPU? Or just the ones with WC?
Finally...as usual best build stuart..i wish someday i can have pc like this
Just beautiful!
Nice one - thanks for sharing
Very nice build. Where are the drain valves?
Simply Amazing.
I think it looks more appealing being able to see the top and bottom radiators. However awesome build as always, amazing how so much hardware can fit in that MINI case! 😂🔥🔥🔥🔥🔥🔥🔥
240 rads look weird in this case
Were did you get the cable cover thing for the graphics card? It looks awsome!
god I hate this channel...lol the perfection and beauty of every build is next level. I just get to sit and drool...like us common folk!
GGF always killing it
just amazing
6:12 What a beautiful shot
It took me sometime to realise that it's an active backplate cooling...
The temps are going to be cold af
I was just gonna ask why he put fitting on the same side for his GPU, then i noticed the bridge :D
so beautiful in mind..
Beautiful build but Im waiting for the final version of the upcoming new Lian Li V3000 case :D
Where can you buy the silver ek flt 120? Is it also custom painted? They look awesome!
Ever done builds with air? Love this video!
Pure Art
This is awsome I've been looking at this case with a view to do a custom loop in the future. Could i ask though... could i pull the same off with an ATX motherboard? and could i use a corsair cpu water block with the rest of what you have used here. Thanks
That FLT 120 DDC pump rear end looks different than the normal one. Is that custom or something new from EK?
Beautiful build. Would you mind sharing where those radiator covers that you are sliding into the top and bottom of the case are from? Are they custom made?
Yep they are custom made from strips of ALU. Most hardware stores should have them. Then you can either paint of vinyl wrap them.
@@GGFEvents Awesome! Thank you for sharing!
@@GGFEvents would you have messurements or a stencil to share? :)
Those covers (top and bottom) you put in at the end of the build. Did you make them yourself? Need to buy those in black. Lol
Yo can you try to do a build like this on the Corsair Crystal 280x? That's my favorite case lol, this one is super similar though.
about the back plate of the active water block, and note that ekwb sell it in silver color, where did you get the white version or was it a mod made? 🤔
@ 4:15 where did you get those rad side hider plates? Im really interested and doing That hope you can get back 🙏🏼
Do you have a count for each of the fittings? My shopping cart is now more than the cost of my 3080 12GB lol
Amazing, as usual. I wonder how it would look with frosty tubes.
Damn!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
always stuning. amazing
you deserve more subs
id buy this in a heart beat if i had the moneyy
Amazing 😍😍😍😍
anyone know what the GPU bracket is? Awesome work again
Oh cool reminds me of my fractal define r6 but mini.. also nice song
Also how do you drain it?
Where did you get the white spaces that covered your radiator? Did you 3d print them?
that looks fuuucking amazing
this is stunning, very nice build
Love this build, I would love this as my first pc. Would you be open to selling?
Foi preciso cortar parte do acrílico no backplate ativo do bloco da gpu para as memorias encaixaram ou eu não estou enxergando direito?
Nice build 👌
4:56 feeding the baby milk 🍼
How'd you fit the PSU? I have a similar system with a 3080ti, but had to re-evaluate and go up to the 011 standard size when I needed more room for an ARX PSU. Wound up going all black rather than all white, not going to lie yours is way more dope... possibly because it was built by a pro rather than me, but hey.
looks amazing~
what is that gpu sag bracket?
I'm curious, how many times did you have a loop leak on you for these builds? :D I'm hesitant to build a custom loop for that reason.
Really really nice
Why 2 rads for cpu and "only" one for gpu been this part the hottets one? Cheers from Argentina 🇦🇷, really love your builds, the Black one is so nice too that i cant choose between them
CPU runs hotter most of them time. Esp a 5900x
Can You Please make a workstation threadripper PROwith dual 3090 build in this Lian Lin case?!
In this case I kind of want to see a quad radiator setup.
Are the thermals any good with this setup?
Does the case come with those 2 panels you put on the top and bottom next to the radiators?
hello sir bricket what did you use to install the reservoir pump.?!
LOL, a white SSD and PSU that you don't even see. I build computers too but I didn't know, you can buy such a thing. Video is top notch like always.