thanks Matt for taken us on the factory tour its all ways good to see how much work goes in two making parts and the time it takes two make a part thanks Matt
Fantastic video Matt. This just shows the ingenuity of the American people and the quality of product that they can produce. And I'm not even an American 👍👍👍.
Congrats to you and dp. How you end up getting invited in a shop like the fuel trailer, volvo or now tds. I like to see these tours.😄😄. Think we see in a later post who bought somthing.
Interesting set up. But the rears are only losing traction due to running out of suspension travel with the singular spring to axle set up. it needs a cantilever style of rear diff hanger set up to. But a great hydro drive system for the front. No front tail shafts to break. No extra clearance issues with the front end swap ( by the looks).
Quality above quantity, Also looks like they have thought about the service guy who has to repair it if or when DP can bust it. Look good on both Lt Dan and Bubba Dump/ Fid Mike take the HR credit card along with him Matt? Nice to see the tour very informative Thank you.
So is Mike thinking about getting a track system for Bubba Dump so he doesn't get stuck in the haul truck anymore? 🤣🤣edit: Never mind, it looks like the track system is more oriented towards combine operators, so maybe it's Chris who doesn't want to pay any more recovery fees LOL
If you can only reverse engineer that process, so DP take note, how Mr. Millennial translates the language of the engineers to the language of the common folks. Thank you Mr. Millennial for that, I knew that you were more than just Dirt Perfect’s sidekick.
Can you imagine if them swift drivers had this technology available how many trailers or trucks would be torn up from them caught up on the 4 ' yellow barricade poles !! 😃👍👍👍
Hi Matt, A question regarding the full hydraulic drive compared to the Fendt Vario gearbox - planetry geartrain using hydrostatic to variate the ratio which is far and away more efficient - (fuel and waste heat)
Ingenious!!! 😎
And their attention to detail and testing far exceeds the industry requirements!!!
Thank you for taking us out on a field trip Matt 👍💪😎
Thank you
Good job Matt.
Thank you
I always enjoy a factory tour to see how things are built.
Me too
Nice to see you doing different things. Great video!
Thank you
Hey everyone let's see if we can get matt to 50.000 subscribers he does unbelievable work and deserves to hit that milestone 👏 👍
Only if you admit he has a disgusting looking brillo pad growing on the his chin.
That would be cool 😂
thanks Matt for taken us on the factory tour its all ways good to see how much work goes in two making parts and the time it takes two make a part thanks Matt
Glad you enjoyed it
Thanks to Matt for taking us along on an informative tour of a very impressive operation .
Glad you enjoyed it
Fantastic video Matt. This just shows the ingenuity of the American people and the quality of product that they can produce. And I'm not even an American 👍👍👍.
Thank you
Great video Matt. Quality control at the heart of everything they do. Even MBTS was quietly impressed………Thanks for posting. 🇬🇧👍👍
Couldn't agree more!
Coming to a show room near you. 😂
Love quality, American made.
DP not used to automatic trucks.
😂😂 nope
Factory visits are always informative and fun.
Thank you
Don't forget to hit that like button it doesn't cost you anything but it surely helps out this channel and matt out a lot
Thank you
DP could have one of those axles on Lt Dan, would be brilliant in the mud. Nice video always good watching how things are manufactured. 👍
I _think_ Lt. Dan is already a 3 axle drive system. Could be wrong though, it's been a while since DP's done anything with that truck.
Thank you me too.
Agreed
Interesting to see thanks for showing.
Glad you enjoyed it
Great video!
Glad you enjoyed it
Great tour of the TDS facility.
Glad you enjoyed it
Thank You for taking us on this interesting journey
You bet
Great Tour.
Quite an awesome product.
Thanks for watching!
Trying to decide if Farmer Chris is planning to put Dirt Perfect Towing and Recovery out of business or if Lt. Dan will be getting a major upgrade.
🧐 🤔
Congrats to you and dp. How you end up getting invited in a shop like the fuel trailer, volvo or now tds. I like to see these tours.😄😄.
Think we see in a later post who bought somthing.
Thank you
Fantastic tour tank you Matt you seemed to be the only one of the crew that was really interested in the product again thanks for a great video
Glad you enjoyed it
Interesting set up.
But the rears are only losing traction due to running out of suspension travel with the singular spring to axle set up. it needs a cantilever style of rear diff hanger set up to.
But a great hydro drive system for the front. No front tail shafts to break. No extra clearance issues with the front end swap ( by the looks).
Thank you!
That's interesting! The hydraulic motors look tiny compared to the axles!
Thank you
Very cool stuff
Thank you
👍👍👍💙💛❤INTERESANT SI INSTRUCTIV . STIMA PENTRU OAMENI CARE LUCREAZA IN ACEA FABRICA. 💙💛❤👍👍👍
Thank you!
Quality above quantity, Also looks like they have thought about the service guy who has to repair it if or when DP can bust it. Look good on both Lt Dan and Bubba Dump/ Fid Mike take the HR credit card along with him Matt? Nice to see the tour very informative Thank you.
Thank you
Coffees on brother ,,!! Enjoying !! :-)!!!!!!!!
Right on!
Test it first, use it forever. Sounds good. Looked like a super efficient shop.
Thank you
That’s neat !
Sure is
Great video it shows how some companies really put out quality products
Yes it does!
Matt, interesting video. Thanks for sharing 👍 👍👍👍👍😾🫠🐺
Glad you enjoyed it
Really neat system.
Yes it is
Quality control is awesome. Interesting visit.
It really is!
Very interesting bro so thanks for letting us tag along. Safe travels
Glad you enjoyed
hello matt its is randy and i like video is cool and spuer cool and i like youtnbe matt thanks friends randy
Thank you
I worked there back when it was just Mudhog. Worked on the 1st drive system that was factory installed by IH.
Nice!
Interesting video 👍👍👍😎😎😎
Thanks 👍
great video
Glad you enjoyed it
hey there Nya millennial was just wondering when and if you are doing more on the castle build great stuff learning lots thanks
More to come!
Back in the day Matt I installed many mud hog systems on a lot of combines
That’s awesome!
So is Mike thinking about getting a track system for Bubba Dump so he doesn't get stuck in the haul truck anymore? 🤣🤣edit: Never mind, it looks like the track system is more oriented towards combine operators, so maybe it's Chris who doesn't want to pay any more recovery fees LOL
😂😂 exactly
My wife needs something like this for when she goes shopping. Lol.
😂😂😂
If you can only reverse engineer that process, so DP take note, how Mr. Millennial translates the language of the engineers to the language of the common folks. Thank you Mr. Millennial for that, I knew that you were more than just Dirt Perfect’s sidekick.
Thank you
Great job, Matt in limiting DP's speaking parts...
Thank you
hello from the Netherlands .
thanks for the video Matt .
Sincerely Hollandduck
Thank you
@@nyamillennial 👍
MM77 Approved 👍🏼👍🏼
Right on!
Can you imagine if them swift drivers had this technology available how many trailers or trucks would be torn up from them caught up on the 4 ' yellow barricade poles !! 😃👍👍👍
😂😂🤣🤣
Is it the green hoody and the cap or the mustach that makes me think Mike looks like Mario Brothers 😉
🤷🏻🤷🏻
Boys day out.👍🐝🌞
Exactly
Hi Matt, A question regarding the full hydraulic drive compared to the Fendt Vario gearbox - planetry geartrain using hydrostatic to variate the ratio which is far and away more efficient - (fuel and waste heat)
Thank you
Only 1 drive axle and 2 tags?
Thank you
that will get you out of lots of eny place made in house 😎💯
Exactly!
Man Mike did not want to make a movie of the plant from Chris
Thank you
👍👍👍
😁😁😁
🇺🇸🇺🇸🇺🇸👍👍👍☕️☕️☕️🥃🥃🥃🍻🍻🍻👀👀👀🇺🇸🇺🇸🇺🇸
😁😁😁
Did DP say that guy was your cousin?
His cousin
@@nyamillennial guy is big too, DP isnt small and this guy was pretty much towering over him it looked like.
1st like 👍
Thanks for liking
Good night matt 😴
Night
1st comment
Awesome
Matt: I missed it, where are you, and what kind of plant is this, what do they make, or build, fix, blush blah blah, like is it rear ends for trucks?
Thanks
Why not judt order front end diff....from factory, and be done with it!
Thanks