GIVE SOME LOVE TO OUR FALLEN DRAN DAGGER ❤ We had to order a new Dran Dagger Deck Set right after filming this video LOL...absolutely brutal but totally worth it since we get to show you guys some epic battles! Does our version of Kadovar's test in real life change your mind about Wyvern Gale at all? I hope we see more of Kadovar in the anime and manga! If we lived in the Beyblade X world, we'd be demanding to be bumped up to floor 100 for breaking out bit 💀
With the xtreme dash and how fast these beys go, they really should increase their quality compared to older generations lol im hoping good tho, TT never fails to deliver quality stuff
Ive had that same problem with my bits breaking easily. It's a structural issue that takara tomy should look into and hopefully fix in the future with Season 2. Because the plastic is too weak and thin to where all it takes is one good hit from a blade to chip them off. So I use my beys with caution just the avoid that issue.
Yeah I never tend to launch my beys at full strength to avoid that. Unlike Metal Fight the metal contact points aren’t reinforced with metal on the inside to keep it strong. The ratchets easily wear and get stress marks and bits are so small it could snap. It’s much worse bc Beyblade X beys go so fast and hit hard they should reinforce it better, hope they can improve on that issue
BBX absolutely demands duplicate parts or entirely new Beyblades... just like Burst. Original print TT Metal Fight beys and parts still hold up unless they are malleable such as Rubber, Metal, etc.
knowing how they're trying to make beyblade x the "pinnacle" of beyblade, They should do it. There's no reason not to, beyblades break easily and parts are pretty cheap
I heard in my local group someone broke an entire blade (it was a prized shark edge with the metal part shattering) imagine that happening to a Cobalt Drake.. TT needs to make regular releases for extra parts.
@@774gameyou say that, but it's more fun than ever, and it's very high quality. It's a give and a take. accessibility and support from TT would be great, but it's a business first, and they have our money. welcome to the world of the West. they're right there with us.
@@ARContent0105 one of the 3 original member of this channel who died because of car crash.he also known for breaking many beyblade product (this is from what i remember about him)
@@ARContent0105 A friend of the current BBGs who died a few years ago. I don't remember how it happened exactly, but it hit the BBGs and their community pretty hard when it happened.
@@aquilaxtremeGT if its a fully plastic piece then pastic glue/cement migh work. It melts the plastic pieces and on drying fuses them together for a stronger bond.
that is the problem with BBX's parts. Due to how the BBX system works is very i mean VERY aggressive. when a bey get's hit via Ratchet/Bit the shear impact from the metal blades will cause it to break. This is why TT should release a spare parts kit just like how they did in MF.
The very same thing happened to my rush bit too. I was devastated, now im going to have to.wait for them to release it again in another release. Well if they do. I don't want to buy that set again just for that one part.
I mean, wyvern technically burst first then rush broke when wyvern's blade made contact to the bit if you watch it on .5 speed during the slow mo. So it wasn't the extreme line.
Tbh you guys should make a new subscribe vid, come on you deserve more so keep 1.8M instead of 1.5M . Ik 1.5M seems better but still you may hit 2M this year only
That's why I'm buying metal bit mods from etsy. If somebody makes metal ratchet mods, I'll be rocking near full metal Beyblades. Until then, only the outer metal part of the blade layer and the bits for me will be metal.
@@LegendaryBro59 no it wasn’t great man, wtf is wrong with you? The anime was garbage and the best in real life had major design flaws, multiple major design flaws.
@@aquilaxtremeGT I didn’t like the anime but the actual Beyblades were great. If you can’t accept that then there is something seriously wrong with you.
Friends, loved ones, that weird guy drunkenly shouting at a cardboard stand of Justin Bieber, we are gathered here today to pay our respects to the late Rush bit.
I truly hate the way you guys say manga with a long Ā like Mānga. It's pronounced Manga; you say the first 'a' like you say the second 'a' it's the same sound (Man-ga), or (Mon-ga), Not (Mayn-ga) its urks me the way you say it, stop it. Youre the only ones I know that say it like that, grow up and actually learn the word please, cuz I called it Mayn-ga as a kid as well til I learned how to say it. Like libary, no it's library.😂 I'm just sayin
@@SevensDranI never once said It was strange, I just stated I didnt like it, and prefered them to say it the other way, assuming they didnt know. Sooo your point?
GIVE SOME LOVE TO OUR FALLEN DRAN DAGGER ❤ We had to order a new Dran Dagger Deck Set right after filming this video LOL...absolutely brutal but totally worth it since we get to show you guys some epic battles! Does our version of Kadovar's test in real life change your mind about Wyvern Gale at all? I hope we see more of Kadovar in the anime and manga! If we lived in the Beyblade X world, we'd be demanding to be bumped up to floor 100 for breaking out bit 💀
Hii btw first reply dude let's go BOoM
Point!
Hey what's up bbgs I was going to say I got a video idea play up against the Ultimate Beyblade to combo against all the Beyblades X Beyblades
Oh dear, its Metal Fusion anime Poison Serpent all over again.
RIP to all the fallen Bits, we thank you for your service and the entertainment and joy you gave us.
LATE NIGHT GANG WHERE YOU ATTTTT?! Time to go to bed 😴 good morning/afternoon to some of y'all that are wayyyy ahead of us
It's afternoon for me btw I'm in India and first reply BoOM
Here bradda
It's 12:07am here in New Zealand and I gotta watch this video before I go to bed lel
Good morning bbg
Late night gang has arrived my friend!
We out here
With the xtreme dash and how fast these beys go, they really should increase their quality compared to older generations lol im hoping good tho, TT never fails to deliver quality stuff
Oh wow I remember watching this TH-cam channel it's good to feel a little nostalgia again ,thanks for making my childhood guys.
Welcome back friend!
Ive had that same problem with my bits breaking easily. It's a structural issue that takara tomy should look into and hopefully fix in the future with Season 2. Because the plastic is too weak and thin to where all it takes is one good hit from a blade to chip them off. So I use my beys with caution just the avoid that issue.
Yeah I never tend to launch my beys at full strength to avoid that. Unlike Metal Fight the metal contact points aren’t reinforced with metal on the inside to keep it strong. The ratchets easily wear and get stress marks and bits are so small it could snap. It’s much worse bc Beyblade X beys go so fast and hit hard they should reinforce it better, hope they can improve on that issue
BBX absolutely demands duplicate parts or entirely new Beyblades... just like Burst. Original print TT Metal Fight beys and parts still hold up unless they are malleable such as Rubber, Metal, etc.
knowing how they're trying to make beyblade x the "pinnacle" of beyblade, They should do it. There's no reason not to, beyblades break easily and parts are pretty cheap
I heard in my local group someone broke an entire blade (it was a prized shark edge with the metal part shattering) imagine that happening to a Cobalt Drake.. TT needs to make regular releases for extra parts.
@@774gameyou say that, but it's more fun than ever, and it's very high quality. It's a give and a take. accessibility and support from TT would be great, but it's a business first, and they have our money. welcome to the world of the West. they're right there with us.
At this point someone should make a bbg bey break compilation
Only thing that would suck is bbg William isn't alive to see it
Who is william?
@@ARContent0105 one of the 3 original member of this channel who died because of car crash.he also known for breaking many beyblade product (this is from what i remember about him)
@@ARContent0105 A friend of the current BBGs who died a few years ago. I don't remember how it happened exactly, but it hit the BBGs and their community pretty hard when it happened.
@@TheLegoKid2003 he died in a car crash
@@PokePlayFusions Ah yes, that's right. Thank you for the reminder.
Dang Wyvern actually did pretty good, also super glue should fix that broken bit up real good hopefully.
Super glue is not gonna fix that😂 one little hit and it’s broken off again… I had the same problem before and super glue didn’t help at all
@@aquilaxtremeGT gotta get the one with the needle tip and mix it with sumn’ to make it stronger
@@aquilaxtremeGT if its a fully plastic piece then pastic glue/cement migh work. It melts the plastic pieces and on drying fuses them together for a stronger bond.
that is the problem with BBX's parts. Due to how the BBX system works is very i mean VERY aggressive. when a bey get's hit via Ratchet/Bit the shear impact from the metal
blades will cause it to break. This is why TT should release a spare parts kit just like how they did in MF.
fr thats why when a burst happens i grab my bey as quick as possible
Absolutely love the battles. But I'm getting a bit tired of Bird losing all the time now lol. I think it's time he should get some wins in the anime.
Character building. Let them cook🔥💪🏾
Oh, man, it’s so Kadover for Dran Dagger
The very same thing happened to my rush bit too. I was devastated, now im going to have to.wait for them to release it again in another release. Well if they do. I don't want to buy that set again just for that one part.
I mean, wyvern technically burst first then rush broke when wyvern's blade made contact to the bit if you watch it on .5 speed during the slow mo. So it wasn't the extreme line.
Not Dran! He was so close to non-retirement
Im sorry that happened but it is BeybladeX
A moment of silence for the fallen Rush Bit…
9:00 Epic sacrificial victory! 🤕🏆🔥
10:45 Very odd given that Ekkusu and Maruchi won in their world, but lost in our world! 😂🤣
It's been YEARS since I've saw you guys I can't believe you guys are STILL going
Love watching battles now since I started beyblading
i did not expect a piece to break lol
Dang..R.I.P dran dagger❤
Tbh you guys should make a new subscribe vid, come on you deserve more so keep 1.8M instead of 1.5M . Ik 1.5M seems better but still you may hit 2M this year only
Luckily that bit should still work, piece is light enough that balance won’t be affected much.
The last drandagger vs wyvergale was something like lui vs shu or lui vs valt on the final of beyblade burst S1
This the first time seeing wizard arrow in a battle since the dransword vs wizard arrow
Sheesh Noo Rush Bit got Sacrificed
Idk why but watching wyverngale spin reminds me of zero g bey spinning
That's why I'm buying metal bit mods from etsy.
If somebody makes metal ratchet mods, I'll be rocking near full metal Beyblades.
Until then, only the outer metal part of the blade layer and the bits for me will be metal.
Rest in peace Dran Dagger you will be missed 🫡
Good video as always
Bird seriously needs to be done justice, he's like the Rantaro of “Beyblade X” and he's supposed to the main character?! What's that all about?
Officially
Ekusu is the MC
Nah bro it's Kazami Bird@@ichigydo8099
@@ichigydo8099bro no, bird is
try some Tamiya hobby glue. it can fuse types of plastics together.
Do you happen to know how many points beyblade x battles go till in the anime?
Bana şunu söylermisiniz beyblade x beyblade burst'e mi ait yoksa bağınsızmı
Do you netoke gyro beys if are they good
Bro do twisted tempo vs 50beyblades ..100%❤❤❤
1:32 Bird could have won that against kodvar in the anime
Who misses 2019 beyblade
👇
Where can i watch the anime
Dang. Sacrificed rush
It looks like the bit broke after it got hit by the wyverngale blade.
R.I.P Rush Bit...
My Knightlance top kinda broke but not too much beyblade geeks why did u put rush in wyvern gale 😫
Just by this video I make my mark
If wyverngale is considered stamina and not defense 😢
Then hellschain is a defense type 😂
I hope that bits get cheaper to get separately
Yeah no kidding! It’ll probably be available in another random booster soon enough
Rip DranDagger 🫡
Beyblade x vs beyblade surge, turbo, gt, and quaddrive
Awakened bit
Are the Beys your using on this video from Hasbro or TT?
RIP Dran Dagger's Rush bit
2023-2023
Press F to pay respeccs
F
yo
A like for dran dagger❤️🔥
Dran dagger will be missed🫡
Hate how beyblade made my favorite avatar or beyblade concept of Wyvern a punching bag that sucks
Yeh wyvern and kadovar’s time in the spotlight was short lived for sure…
First time being early in your vid bbg❤
It isn’t a BBG video if something doesn’t break
😂 a hefty price to pay to be us
Hi
I already miss beyblade burst. Can we please bring back some burst battles?
please no, im so happy its over. dont bring it back already
What the heck are you talking about man? I’m sad it’s over! Beyblade burst was great!
@@LegendaryBro59 no it wasn’t great man, wtf is wrong with you? The anime was garbage and the best in real life had major design flaws, multiple major design flaws.
@@aquilaxtremeGT I didn’t like the anime but the actual Beyblades were great. If you can’t accept that then there is something seriously wrong with you.
@@LegendaryBro59 no, it’s the opposite. There something wrong with you bro
Change your phone battery
Now I want a real persona collab
I don't know why but Im not a fan of the new looks of the beyblades
YOOO
yoooo
Make a giveaway
Friends, loved ones, that weird guy drunkenly shouting at a cardboard stand of Justin Bieber, we are gathered here today to pay our respects to the late Rush bit.
Third
Furst
Beyblade god's make this the top comment Plz
I truly hate the way you guys say manga with a long Ā like Mānga. It's pronounced Manga; you say the first 'a' like you say the second 'a' it's the same sound (Man-ga), or (Mon-ga), Not (Mayn-ga) its urks me the way you say it, stop it. Youre the only ones I know that say it like that, grow up and actually learn the word please, cuz I called it Mayn-ga as a kid as well til I learned how to say it. Like libary, no it's library.😂 I'm just sayin
Imagine telling two asian guys how they should pronounce manga. Especially when their pronunciation isnt strange at all
@@SevensDranI never once said It was strange, I just stated I didnt like it, and prefered them to say it the other way, assuming they didnt know. Sooo your point?
ITS BEEN ALOT OF YEARS and YALL DONT HAVE 2M SUBS YET?!?! THEY NEED 2M SUBS EVERYONE COMMENT 2M SUBS FOR BEYBLADE GEEKS
Hi