How To Make Novastar RCFG File for P2 5 LED Panel ( By NovaLCT )
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- How to make Novastar rcfg file? It came to you or your engineer's mind when the LED screen configuration failed.
In this video, YUCHIP's professional engineer Mr. Jonas Zheng will guide you on how to make Novastar rcfg files by Novalct software. He uses a P2.5 LED panel as the demo.
A brief introduction of the steps:
1. Connecting 220(110)voltage main power cable to 5V 60A power supply;
2. Connecting 5 voltage power cable to 5V 60A power supply;
3. Connecting 5 voltage power cable to Novastar MRV336 receiving card;
4. Connecting flat cable to Novastar MRV336 receiving card;
5. Connecting 5 voltage power cable to P2.5 LED panel power interface;
6. Connecting flat cable to P2.5 LED panel signal interface;
7. Connecting Novastar sending box(card)between laptop (PC) and MRV336 receiving card;
8. The TB2 sending box is connected to the MRV336 receiving card with a network cable;
9. Use NovaLCT for smart settings;
10. Choose the correct option according to the content displayed by the P2.5 LED panel;
11. According to the specification of the P2.5 LED panel, select the parameters that match on NovaLCT;
12. P2.5 LED panel demo in this video: Size:320×160mm Pixel: 128×64 IC： ICN2153 Decoding： ICN2013
If you would like to know about how to make Novastar RCFG file for different LED screen panels, LED modules, please feel free to contact us:
Email: manager@yuchip.com;
Website: www.yuchip-led.com
Mobile, WhatsApp & WeChat: 008613798508687
كيفيه الحصول عل ال ic
Hi to know decoding code of module
How to get decoding number
me parts ganna thiyenne koheda
instead of music, voice in hindi Or english will make this so attractive, I think
Many thanks for your advice, we will figure it out and proceed accordingly.
How can you find out what is the chip name in the module?
There are a few black chips mounted on the module's back. It has numbers and models marked on the chip.
@@Yuchip-led I checked that but they can't be read cause they are so small.
Hello . Have MBI 5252 GP Chip. What Row Decoding must I select ?
@@SmindloMindlo Hi, 138 decoding or 5958 depends on the row IC used on the module
Can you maybe share links to all gear used on ali? Thanks
Please drop us an email for a detailed solution. manager@yuchip.com; www.yuchip-led.com
if we have module LED BUT we NOT KNOWN THAT IC CHIP is which brand and which pitch . But we want to make cfg FILE. it can be do or not???
We can guide you on how to get the exact drive IC model. It's necessary to make the right RCFG file.
i need 1 new video[
\
How To Make Novastar RCFG File for P2 5 LED Panel ( By NovaLCT )
Hallo sir ic deciding number kasa. Dekha ice number to PATA ha
Could you please provide more details? You can reach us through email too. manager@yuchip.com, www.yuchip-led.com
where did i get for mrv336 4.6.1 version firmware please need urgent
Hi Angle, can you give us your email address, please? You can also send an email to: manager@yuchip.com. We will send you the firmware by email. Or, check our site to send an email: www.yuchip-led.com.
How to order the kit ?
Hi Chan. Did you send us an email? Please drop us an email to prepare you the quote: manager@yuchip.com; www. yuchip-led.com
P4 led panel video
Can you please drop us an email? We can make a P4 LED panel video and share it with you. Email: manager@yuchip.com, www.yuchip-led.com
need 1 new same video
@@MohammadBasir1996 Hi Mohammad, what video content do you expect?
Hi sir......
i need 1 new video
How to make novastar RCFG File for p2.5 LED panel. 1metre×1metre
@@cityoflove3471 Hi, making RCFG for one LED module and 1x1m cabinet is the same step. The difference is one receiving card connecting how many pixels wide and high.
@@cityoflove3471 For instance, one P2.5 320x160mm LED module resolution is 128x64 pixels. Your one panel 1x1m resolution is 400x400 pixels.
@@Yuchip-ledhi sir. i have p2.5 led panel 1×1m cabinet. Total 18 piece screen. Connect 2 receiving card.
🖥️🖥️🖥️
🖥️🖥️🖥️
🖥️🖥️🖥️
🖥️🖥️🖥️
🖥️🖥️🖥️
🖥️🖥️🖥️
👆
Like this.
As you show in the video. It's not like that. please help me
but that is for only one led module, and for a complete cabinet how is it done?
Please drop us an email for a detailed solution. manager@yuchip.com; www.yuchip-led.com
Hello
Hi John. Are you looking for further support? Please drop us an email with your specific requirements. Email: manager@yuchip.com, www.yuchip-led.com
How to find ic and decode
Hi Lalit. The IC is on the backside of the LED module, marked with its model number. And each decode has a physical model, SMD1921 or SMD3535, etc. May I know which pixel pitch LED panel you have?