How Plan Bracing Works !
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- #Plan_Bracing
Learn what is Plan Bracing, why Plan Bracing is used and how Plan Bracing carry load.
You must have seen that in many steel structures Plan Bracing are used.
But do you know-
What is Plan Bracing?
Where Plan Bracing is needed?
How Plan Bracing carry load?
Well, This video will explain you every thing.
=========================================================
Don't forget to SUBSCRIBE my channel to get civil engineering video on ANALYSIS. DESIGN. Construction
.=========================================================
You may not find your Costly Engineering Class useful. But surely here you will get all the important civil engineering lesson not only FREE but INTERESTING!
DISCLAIMER: All the videos are educational purpose only. Thank you for supporting me .Continue to stand by me so that I can continue to provide you with free knowledge every day .And help you to develop your engineering skill.
If bracing was rods, then they aren’t designed to take any compression. The load path would change.
Could you please do a video with that?
I think you might have explained the transfer of the lateral load through the bracing in a wrong manner. The bracing system are usually made of slender members/ties that only take tension and any compression load that is induced in the bracing members will cause them to buckle due to their slenderness. Instead the lateral load is passed throughout the structure through the roof sheeting which act as a diaphragm and the bracing system will transfer these diaphragm loads in tension to the columns instead.
Interesting..I would like to know if what Remon explained is the right way
The roof sheeting is too much of a slender section to be considered as a rigid diaphragm, you just can't assume it will transfer the lateral forces directly to the columns
You're a great teacher. I never had any idea why there is bracing in roof before. But I do now. Thank you for sharing your knowledge. I'm enlightened. Keep up the good work!
love your support
sir one question. you are talking that the load will take the shortest path, but what if the rafter has very big stiffnes and the brace very small. in than case the load will not go through brace? i mean stifness isn't a parameter determines the load path?
Great Explanation.. I have a question. @ 6:24, structure purlins have large spacing so that these plan bracings are provided after each purlins.. but @ 6:15 structure, purlins spacing are so close , so that it will very uneconomical to provide these plan bracings after each purlin. so what is the other option??? and my other question is that, after structural analysis, we found that in these plan bracings there is compression forces. but in many of the cases we see that in these type of structures, tension rods or cables are provided (which are very slender) as plan bracings and vertical bracings.. so where will be the compression load go?? it will look like useless to use these bracings? please answer to my question.
Good explanation. Thank you for sharing.
Glad you like it
Explained very lucidly.👌
Glad you like it
شكرن بش مهندس اعجبني شرحك
Glad you like it
Superb teaching sir...
Keep watching
Thank You 💐
You're welcome 😊
Great! Please do an bracing design egsample
Will do!
Great
Glad you like it 🙏
Great
Glad you like it.