yes as my title suggests ...without the project zero mobo.. so many ppl.are confused thinking u have to use msi project zero..I have already done 2 builds using this case without the project zero and it comes out gorgeous..just need more time on cable.management to hide all the cables but it's 100% possible and looks great
@@paulsegard5980 TO A CERTAIN EXTENT , it creates a ventury effect where it will suck alot of air out side , in my experience the dust filters get very dusty , but the inside of the case stays clean as long as you have dust filters , the rule of thumb to follow in this case is always have more intake then exhaust , but its different for everyone and depends on your case too , ive put intake on the top before for small itx builds and it worked better then exhaust on the top , eventho everyone says your suppose to put exhaust on the top as heats risers , but u do what woprks for you , in the end as long as you are moving hot air out of the case and introducing cool air from outside its gonna work fine
I hope you know you messed up the air flow in that case... you're pushing ALL the airs out like it's preventing air from going in... the MSI fans that came with the case is reverse. MSI listens... they don't want the ugly side of the fans to show... so they made the fans reverse. And you made the exhaust fan (the back) intake
Bro I have just ordered the same Case where is the housing for HDD and SSD in this MSI cabinet. Someone Online said that there is no place to store HDD's in this one. Please Help as I might need to cancel my order because of this reason
not true u can use hdd in the front bottom right, do not listen to them, they do not know what they are talking about, u can install either x2 hdd 3.5" or x2 2.5" SSD , its your choice, there is rrom to do that
u can with the right hardware ... although it will sit pretty high as it has to sit on the top shroud of psu cover ..and that would make it sit very high almost covering half mobo... due to the structure of the case and design..u would need an aftermarket vertical mounting bracket which isn't designed for the vase but u can make it work...which also means u need to plug the display cables inside the case past the rear slots
@@Rishabhvlogsu will.have some what a fair amount of customising for sure... it's still has plenty of room and great features to build it to your standards..plus remember u don't need project zero
are u asking where the header is? usb 3.0 is the 19pin connector also referred to as the usb 3.0..however some motherboards refer to it as 3.w as it's 2nd gen and abit faster
stay tuned guys I'll be doing another build using another matx non project zero but this time in a black case ..let's see which looks better ... 🤔
Thank you for posting this, wanted to see a build without having used the Project Zero mobo. Considering this for my upcoming mATX build.
no worries. what do u think? turned out ok I reckon?
Build is amazing! I'm also going with a Radeon GPU this time.@@MIKEYZVLOGZ
Bro, so this case can fit without motherboard msi zero series? I am using Asus prime b760m wifi a-d4@@MIKEYZVLOGZ
Wow even leveled the gpu.
That's amazing ❤..the colours look so cool
thanks
Love that short cable straight up from the psu shroud to the gpu.
Would you recommend?
it's the lian li 8pin x2 strimmer it's a beautiful cable ...looks amazing..yes I recommend itb
Is it possible to complete this build without project zero motherboard? And.. does it have place for cables in the rear ?
yes as my title suggests ...without the project zero mobo.. so many ppl.are confused thinking u have to use msi project zero..I have already done 2 builds using this case without the project zero and it comes out gorgeous..just need more time on cable.management to hide all the cables but it's 100% possible and looks great
@@MIKEYZVLOGZ thanks for the information.. I was confused 😵💫❤️
@jashwanyt6747 no sweat
Looks great. Thats alot of intake fans, i imagine itll have a positive pressure air flow.
so 4 exhaust and 6 intake which is a good ratio as long as u got more intake then exhaust
@MIKEYZVLOGZ agreed. I have 5 intake, 4 exhaust in my system. Keeps good positive air pressure and cooling without sounding like a wind tunnel lol
@@Acetheskyhook exactly
is it a problem if i have 3 intake and 4 exhaust
@@paulsegard5980 TO A CERTAIN EXTENT , it creates a ventury effect where it will suck alot of air out side , in my experience the dust filters get very dusty , but the inside of the case stays clean as long as you have dust filters , the rule of thumb to follow in this case is always have more intake then exhaust , but its different for everyone and depends on your case too , ive put intake on the top before for small itx builds and it worked better then exhaust on the top , eventho everyone says your suppose to put exhaust on the top as heats risers , but u do what woprks for you , in the end as long as you are moving hot air out of the case and introducing cool air from outside its gonna work fine
I hope you know you messed up the air flow in that case... you're pushing ALL the airs out like it's preventing air from going in... the MSI fans that came with the case is reverse. MSI listens... they don't want the ugly side of the fans to show... so they made the fans reverse. And you made the exhaust fan (the back) intake
yes I know now... I didn't know they were reversed ...now I do so I flipped them around and now they are intake again.
@@MIKEYZVLOGZ ohhh lol ignore what I said lmao
@P1Chani all good ... I only realised after ... but fans are flipped back around now and it's intake
@@MIKEYZVLOGZ okay lol yeah I understand you're just used to making fans intake and exhaust. It's all cool :]
Bro I have just ordered the same Case where is the housing for HDD and SSD in this MSI cabinet.
Someone Online said that there is no place to store HDD's in this one. Please Help as I might need to cancel my order because of this reason
not true u can use hdd in the front bottom right, do not listen to them, they do not know what they are talking about, u can install either x2 hdd 3.5" or x2 2.5" SSD , its your choice, there is rrom to do that
@@MIKEYZVLOGZ Thanks a Ton Bro. I freaked out because of the storage issue. I have nearly 2 HDD and one SSD.
nice
Thanks
Hi friend, what watercooling are you using?
thermalright aqua elite 360mm white
i was planing to upgrade to msi magpano case but i was bit hesitant that my motherboard might not fit on it
thanks to this it might be possible
if u have matx it will fit ..if itx definitely 200%
SUBSCRIBED!!
🙂 thanks mate i appreciate u
the case looks fantastic you did not have any trouble in installation i am planning to buy it ?
not at all I think they did have the prethought to accompany nornal matx mobos
check out the full build here th-cam.com/video/5IFzxTbOBIg/w-d-xo.htmlsi=6EE-0iPoZvPAtoPo
Did you reverse the…. Reverse blade fans?
yes not knowing they were reverse but flipped them around again so they are intake
Can we use vertical mount for gpu in this?
u can with the right hardware ... although it will sit pretty high as it has to sit on the top shroud of psu cover ..and that would make it sit very high almost covering half mobo... due to the structure of the case and design..u would need an aftermarket vertical mounting bracket which isn't designed for the vase but u can make it work...which also means u need to plug the display cables inside the case past the rear slots
So any vertical gpu mount bracket will work like the universal ones from corsair?
Actually i just bought this case and its coming tomorrow so out of this excitement i want to explore the customisation area of the cabinet
yes universal ones @@Rishabhvlogs
@@Rishabhvlogsu will.have some what a fair amount of customising for sure... it's still has plenty of room and great features to build it to your standards..plus remember u don't need project zero
Where is usb 3.2 gen 1 connection L shape? 😬
are u asking where the header is? usb 3.0 is the 19pin connector also referred to as the usb 3.0..however some motherboards refer to it as 3.w as it's 2nd gen and abit faster
Do you think this is better than the phanteks nv5?😊
really depends on personal preference
Whats is the pc motherboard Please ?
gigabyte b650m gaming wifi
Идиотский корпус не удобный
Bro is the windows glass?
only the side panel is the other is perspex or acrylic
Latéral fan are in wrong Side... 😂
ye true dat I only realised after I felt air coming out lol..so I flipped them around and now it's back to intake lol 😆
@@MIKEYZVLOGZ 👍😉
Nice job.
@@thibs8801 cheers bud I appreciate u