Ashley, your are not only an extraordinary turner but it appears that teaching comes naturally. This short video is useful, informative, and quite clear in its presentation. This made a lot of sense to this newby turner. Well done.
I've not turned wood on a lathe since my high school years. I graduated 1973. I do enjoy watching you Phil, Kim, and a few others. You are my fav because you are very knowledgeable....and pretty! Just a real joy to watch. That huge table was special, to say the least. What an honor that must have been for you. I'm Keith, in the foothills of NC, Hickory. 65, almost 66, retired. Do not do commercial crap TV. Have internet to TV, stereo thru TV also, Roku and DVD blue ray. TH-cam in so many ways is better. There, you get real life, not 100% bs in between commercial crap! I like channels like yours, Woodmizer mills, off grid families and some news and military channels. Your work and your shop and shed are awesome. You're so young and pretty, I keep waiting to see boyfriend, husband, girlfriend...no ring! You must have turned a huge maple bat to keep them away! Well, I'm forever subscribed and anxiously waiting on your next post! Thanks so much for sharing your beautiful self with all of us!❤
I know nothing about turning. I am a above avg. woodworker. I build structures, tables, just finishing a 4ft. humidor that is oak lined with Spanish cedar. I find a lot of inspiration to even attempt turning. Thanks for all the stuff you do. I consider you to be amongst my fave master craftsman out there.
One of the best instructional videos on YT. Believe me, I've commented on a lot of 'em and watched (or tried to watch) LOTS of 'em. Informative, fewer ads than a cable tv show, and excellent production quality. 👍
I love the carbide tipped tools, especially the round cutter for resin-wood pieces. Saves a lot of chips from occurring! Standard gouges always leaves chips no matter how sharp I get them. Great video!
Most people have no idea how efficient scrapers can be, especially for heavy duty roughing out of bowl blanks. Emphasis on roughing. The reason the carbide scrapers are so popular is that they are small scrapers and fairly simple to use. As you said, a scraping cut does not leave a clean surface on bowls, except for sweeping across the bottom of a bowl, but not up the side. I do prefer them for shear scraping as well. Biggest problem most have with using standard scrapers is that they think bigger is better. This is the primary cause of getting too much metal into the wood at one time, and causing huge catches.
Best video I have ever seen on the subject. I use both the old time & current Carbides ...... there are differences but they are all there to help us out. Very well presented.
You've put care into your presentation, combining slow-motion video with your voice over. Thank you for doing this! Those 2 or three seconds (showing the cutting edge effortlessly slicing strings of wood) turned the light in for me.
Another great video!!! I have made a ton of sawdust with both traditional and carbide, and although I really like the idea of traditional tools, carbide was easier to learn to use. I really want to become proficient with the traditional tools for a number of reasons, specifically, well...tradition...so to speak. I have found that carbide has its place in my limited set up, and my even more limited experience level, mostly in hollowing as you pointed out here. Thank you for sharing your art and your knowledge. I follow a multitude of turners and woodworkers on TH-cam, and woodworking has been a therapeutic, almost meditative stress reliever for me. Without getting too personal, I have a worked in a very high stress job going on 30 plus years. Learning from you, and the many other woodworking and wood turning artisans here on TH-cam, then heading out to my little garage shop to apply what I learn is beneficial in ways that you and this community may or may not realize!!! Suffice it to say that I appreciate and value what you and all of the others in the wood working and wood turning community do... It is truly invaluable. I can't wait to see more!!! Thanks again, take care, and be safe.
Best explanation of bowl gouges I've seen. Any chance you could do the same treatment for spindle gouges and skews? and thank you for the continuosly good content.
Things I never knew, thank you. I used traditional tools in high school, (in the 80's). I started turning again a couple of years ago and went to carbide. One reason is cost of the tools, grinder for sharpening, and all the other stuff needed. I do sharpen my own carbide tips and get a long life out of them. Maybe one day I will save up and add traditional tools to my arsenal. Love your videos and I always learn something new.
Very good to see someone making a case for traditional hand turning. Not everyone has the aptitude or time to develop these skills. And yet I have met world class turners that only use scrapers in the traditional sense, being made of medium carbon steel. Also, there are a lot of turners considered to be at the highest level who rough in with tools but actually do most of the work by sanding. If the end result is satisfactory it should be good enough. Not many can afford HSS or carbide tools and the sharpening equipment needed. The sort of cutting edges available in carbide are very limited and custom grinding of HSS is well beyond most people.
Back in the 70s when I was really into spinning wood, I forged all my turning tools with good carbide steel incorporated into the cutting ends. These baby's would go for the longest time without sharpening. Unfortunately, I lost all of these in a house fire. What was really nice is that I could custom make any specialty gouges needed.
I'm using diamond stone and I still have the same carbide since 2 years. I'm not professional woodturner but I'm using quite often my lathe (minimum 10 hrs a week)
I've only ever used traditional gouges, carbide is $$$$ and after watching this I'll be sticking to traditional 😉 thank you for all of your content it is amazing to see the work you do but also informative like this video.😊
Ashley, good description on the short comings of flat chip carbide tools. I’m a big fan of bowl gouges but also use Hunter Carbide Tools which use a cupped carbide cutter. These tool cut, not scrape, and bevel support is possible depending on the angle you approach the cut. These tools leave a cut that matches my bowl gouges in the correct application.
All excellent points. I use carbide because I started making pens on a midi lathe and although I learned to make bowls with gauges my shop is extremely small so using gauges means buying a grinder, jig, etc. no room. I make small projects so the carbide works for me for now. If I had more room I would do things differently. It boils down to do what works for you. Love your vids.
You don't have to throw away the carbide tips. Lay them upside down on a diamond stone and push the back and forth and in circles until you have brand new sharp edges. Use non ammonia glass cleaner which is much cheaper than the Trend fluid to lubricate the diamond stone.
I started out on a spring pole lathe with hand tool gouges lol.... I learned what I needed to and after 8 hours and a piece of hickory I had a bowl.... 2 weeks later I got my cheap HF Lathe and tools and learned about bowl gouges..... Fast forward 5 years and I have some sub par tools and only 1 round carbide cutter. Woodworking is in my genealogy and my blood.... Always wanting to learn more and you have helped progress my knowledge. Keep the good content coming 😁
I use both traditional as well as carbide tools and they both work very well. You can in fact sharpen carbide tools. To sharpen carbide tools simply remove the cutter and use a diamond grinding card and rub the top of the cutter on the diamond sharpening card.
I just bought a lathe a couple days ago. Was really interested in the carbide tools because I had heard they were easier, and I don't know anything about sharpening. I'm glad I decided to get steel tools.
When I was a kid, my father had a wood lathe that he rarely used. He sold it to a neighbor and bought another professional camera, since he was a professional photographer. I went on to become a fine art photographer, and used that camera through graduate school. Now I am retired and wish I had his lathe, but then I might not be sitting in my nice house now which was the result of a pension I earned as a fine art photography teacher. I will never know. Anyway, I also took ceramics and taught it. Turning wood reminds me of that. I can see myself getting into turning, but it is a whole nother thing. Maybe not. At 72 you have to pick your shots. Anyway, great video. You know your stuff. You remind me of some of the female artisans I knew in graduate school. I rang the bell and subscribed. It should be fun watching your content.
@@MatheusRaymundo10 Looks like a lot of fun, and challenging, but I have too many things on my plate and I would have to buy all of the equipment. At this point, there is a high bar to becoming involved with a new medium, and realistically, I probably couldn't practice it for long, being almost 72. In the past year, I have bought a lot of woodworking equipment. That will have to be my alternate medium, photography being number one. As you age, you realize increasing limitations on time to learn and practice a new skill, your finances, and probably your health. I look forward and think, "i damn in 8 years I'll be 80!" I hope to be in great shape, but I may not even be here. If I knew I would be going strong at 100, I might put the time and money into it. Odds are against that. You should learn and refine a life skill when you are young, and then become known for whatever that is. A person has to be honest with himself/herself and think, what do I love enough, have commitment enough, time enough, finances enough, and a big enough place to get into this type of art? Then, they also have to ask, if I do all that, can I make enough money to live the way I want and can I stay committed to it for my entire working life? I would want to become a very skilled craftsman, like Ashley. That will never happen for me with the time I have.
Great video - I'd already ordered some carbide tools to start learning with, but I'll now order a traditional gouge to experiment with when I've gotten the hang of things a bit. Thank you.
This was a great explanation. Thank you! I just bought a Sorby TurnMaster set the day before this was uploaded and was wondering what I was doing wrong. Most videos make carbide tools sound amazing but this was right on point with my initial experience of them. Bought them to practice hollowing some small vases so, I'm sure I'll use them a bit. Great explanation of traditional bowl gouges too, very helpful.
I turn both wood and metal like BradPow. What I see is the Round carbide is super forgiving as it won't catch a point or edge. You can move in various directions whereas the gouge is directed in a direction. And if you have any epoxy in cracks the HSS won't cut well but the carbide will.
Thanks Ashley! I found this informative for someone that hasn't even really read up on turning...just watched in AWE and Fascination as you and others create such amazing pieces...like your AMAZING ORNAMENTS I SAW ON INSTAGRAM! Crazy Cool! Well done & thanks for sharing! :)
Эшли потрясающе выглядит) и таки да, твёрдосплавы больше подходят для начинающих токарей, только потому, что у них заточка держится дольше, но это совсем не значит, что их не нужно точить, или выбросить и купить новые)) в отличии от таких сталей как Р6М5 или Р18, которые быстро точатся и весьма доступны, но требуют определённых навыков в использовании, в том смысле что если ими неправильно пользоваться, то они быстро придут в негодность, в отличии от твёрдосплавов которыми можно дольше работать, но и проблематично затачивать.. спасибо за субтитры, почтение и уважение мастеру :)++
I used to have so many catches before switching to a 40/40 grind for bowls. Some day I'll upgrade to one of your quality gouges. I still love using carbide insert tools for roughing and scraping, though. If used as a negative rake scraper, I've been able to get very smooth finish with fussy (for me, anyways) wood like aspen.
Very nice explanation. I’ve been trying both lately, and I really do prefer the traditional styles. As you point out - wonderful marketing for carbide.
Ashley, thank you so much for this information. I had been wondering about the value in getting some carbide tools and your details definitely make that decision much easier! I guess I can spend that money on something else, :-).
Ashley, I love your work!! Can you pass along some information on the type/brand of face shield you use and the type your students use during your training seminars. I noticed that yours has a breathing apparatus that I think would be very helpful, especially for those of us who constantly battle with sinus issues. Thanks again and keep doing what you do.
I find I can use my square car bide tip lin a different way than scraping. I turn pen blanks and spindles by using the bevel underneath and bring the cutting edge down until I get a pealing cut. ( I also begin by rounding the corners a little with a spindle roughing gouge)
Great information. After 30 years of turning I have finally got a variable speed lathe. What is the best speed to start with when turning a bowl? Thanks for all you informative videos.
Garry not Linda. Check out the Turn A Wood Bowl TH-cam Channel and/or website. Kent recently did a video on turning speeds but he's a wealth of information on all aspects of bowl turning. I have no connection but am a recent subscriber and have been mining his channel for about a month now.
Do you happen to have a traditional store front I could visit while I'm in Charleston? Any where I could see your work? A shrine maybe? I'll be there for a few weeks for work and would love to see your work in person.
Just a guess on my part but I believe Ashley has a sponsorship arrangement with a particular tool manufacturer so she needs to blur out a competitor's tool. Again...my guess only.
Ashley, as always an excellent demonstration. I am a fan of both tool types, however I think each has their place. I can't cut a bowl with anything other than a gouge...I just love how the gouge works and the cut is so clean when done right. That said...if I do any king of lipped bowl or vessel...I have never been able to get a gouge to do the job right. There always seems to come a time when I just can't get the right angle to start the cut properly with lipped bowls and especially vessels. I've been told it IS possible to hollow with a gouge, though. What are your thoughts on that? If you are hollowing a vessel, do you still use a gouge?
As a follow on to that question...if you do use a gouge, which kind? I've recently wondered if a bottom gouge might work better on the hollowed out sides of a bowl/vessel, as it seems similar to gouging the bottom of a bowl... A bottom gouge is one of the few tools I do not have yet...
I am just curious, what is the larger old lathe behind you in this video? Do you ever use it for turning? It looks like the nameplate might show Oliver, but I am not sure.
I design metal working tools and it seems to me, the only real problem with carbide vs hss word turning tools, is the lack of a proper insert holder, or more traditional style insert holder (well aswell as more variety in insert shape), to allow the free form techniques that you suggest, or a solid carbide traditional formed tool would work as well...though it'd be prohibitively expensive....Nice video!
HSS gouges are like a manual transmission. Takes more to learn but so much more fun when you do! 😁 Was just today looking for a spindle gouge that didn’t have a super long flute. Less flute may mean less steel that can be sharpened, but it means a more rigid tool - especially when they’re often narrower to begin with. Do you have any brands/models you like for a spindle gouge?
One of the nice things about the conventional gouges is that with a little work they can have any of the well known cutting shapes. You can go from the more or less conventional grind to the 40/40 to the Irish to the more radical swept back grinds. If you ask any pro turner about specific brands you will get their favorite. But in 40 years of turning I believe they all use pretty much the same steel.
Sorry, to clarify, I mean how far down the length of steel they grind the flutes. I’d rather have a tool that lasts me 10-15 years of sharpening and is rigid than lasts me 20-25 but chatters more. But all of the ones I’ve been looking at have the flutes ground most of the length of the steel.
Chatter is dependent on the diameter of the tool and how much of the tool overhangs the tool rest. If you are getting chatter move the tool rest closer to the work piece. Or if necessary get a larger diameter tool. Of course you must have a sharp tool too. I don't think the length of the flute will be that significant.
Well done. After forty years of turning (and learning daily..) this is a fine explanation. I have never seen any use for those over priced carbide tools...
I turn with EWTs exclusively. The deciding factor was the extra cost involved with traditional tools; a slow speed grinder, tool jig, and 2 CBN grinding wheels I can buy a lot of inserts for that total cost!
Nothing could be further from the truth... I use a $60 high speed grinder with white wheels, no jig, none needed. Very low cost set up. In fact I have used it for four decades. Using those carbide tools is not turning, it is bludgeoning the wood into submission and then requiring copious amounts of sandpaper. Traditional tools are by far the more cost effective but most folks are unwilling to learn proper technique...
But, to be done properly, all the afor mentioned tools are needed. As I read your comment, it leads me to believe you grind perfect bevels and sweeps by hand, not hardly.
@@johnwallace4408 No, no they are not. If that were the case how did anyone accomplish fine turning prior to their invention..??? And you do not need sharpening jigs, they are a waste of money. The very same motor skills one uses to turn freehand. And "perfect" bevels are not required, just functional and sharp ones. Production turners have sharpened freehand forever, it just takes a bit of practice. I also freehand my plane irons, knives and chisels.
@@johnwallace4408 I do not know the man, but in 4 decades of use I would expect he has be come proficient with freehand sharpening. And presuming you have a use for chisels, putty knives, screwdrivers, etc you do have a grinder.
Not all carbide tools cut by scraping. The Sovereign Ultima Hollowing System for example cuts in very much the same way as a traditional bowl gouge. Except it has a guide to adjust the depth of cut. And the insert tip can be re sharpened. The insert in fact is shaped like a tiny "bowl".
Ashley, your are not only an extraordinary turner but it appears that teaching comes naturally. This short video is useful, informative, and quite clear in its presentation. This made a lot of sense to this newby turner. Well done.
Finally a good answer about this question. Well done for this presentation 👌
I've not turned wood on a lathe since my high school years. I graduated 1973. I do enjoy watching you Phil, Kim, and a few others. You are my fav because you are very knowledgeable....and pretty! Just a real joy to watch. That huge table was special, to say the least. What an honor that must have been for you. I'm Keith, in the foothills of NC, Hickory. 65, almost 66, retired. Do not do commercial crap TV. Have internet to TV, stereo thru TV also, Roku and DVD blue ray. TH-cam in so many ways is better. There, you get real life, not 100% bs in between commercial crap! I like channels like yours, Woodmizer mills, off grid families and some news and military channels. Your work and your shop and shed are awesome. You're so young and pretty, I keep waiting to see boyfriend, husband, girlfriend...no ring! You must have turned a huge maple bat to keep them away! Well, I'm forever subscribed and anxiously waiting on your next post! Thanks so much for sharing your beautiful self with all of us!❤
Had a Shopsmith.I set up the lathe and tools chattered.A friend laughed and sharpened the tools.Wow!!Night and day!Thank you,Ashley
As a machinist who runs metal lathes with carbide and hss tooling, I've always wondered how that works with wood lathes. Great video!
I know nothing about turning. I am a above avg. woodworker. I build structures, tables, just finishing a 4ft. humidor that is oak lined with Spanish cedar. I find a lot of inspiration to even attempt turning. Thanks for all the stuff you do. I consider you to be amongst my fave master craftsman out there.
One of the best instructional videos on YT. Believe me, I've commented on a lot of 'em and watched (or tried to watch) LOTS of 'em. Informative, fewer ads than a cable tv show, and excellent production quality. 👍
I love the carbide tipped tools, especially the round cutter for resin-wood pieces. Saves a lot of chips from occurring! Standard gouges always leaves chips no matter how sharp I get them. Great video!
Most people have no idea how efficient scrapers can be, especially for heavy duty roughing out of bowl blanks. Emphasis on roughing. The reason the carbide scrapers are so popular is that they are small scrapers and fairly simple to use. As you said, a scraping cut does not leave a clean surface on bowls, except for sweeping across the bottom of a bowl, but not up the side. I do prefer them for shear scraping as well. Biggest problem most have with using standard scrapers is that they think bigger is better. This is the primary cause of getting too much metal into the wood at one time, and causing huge catches.
Best video I have ever seen on the subject. I use both the old time & current Carbides ...... there are differences but they are all there to help us out. Very well presented.
Thanks Ashley, you're a great instructor
The woodwhisper course is fantastic I learned a lot from Ashley.
You've put care into your presentation, combining slow-motion video with your voice over. Thank you for doing this! Those 2 or three seconds (showing the cutting edge effortlessly slicing strings of wood) turned the light in for me.
Another great video!!! I have made a ton of sawdust with both traditional and carbide, and although I really like the idea of traditional tools, carbide was easier to learn to use. I really want to become proficient with the traditional tools for a number of reasons, specifically, well...tradition...so to speak. I have found that carbide has its place in my limited set up, and my even more limited experience level, mostly in hollowing as you pointed out here.
Thank you for sharing your art and your knowledge. I follow a multitude of turners and woodworkers on TH-cam, and woodworking has been a therapeutic, almost meditative stress reliever for me. Without getting too personal, I have a worked in a very high stress job going on 30 plus years. Learning from you, and the many other woodworking and wood turning artisans here on TH-cam, then heading out to my little garage shop to apply what I learn is beneficial in ways that you and this community may or may not realize!!! Suffice it to say that I appreciate and value what you and all of the others in the wood working and wood turning community do... It is truly invaluable. I can't wait to see more!!! Thanks again, take care, and be safe.
Best explanation of bowl gouges I've seen. Any chance you could do the same treatment for spindle gouges and skews? and thank you for the continuosly good content.
Things I never knew, thank you. I used traditional tools in high school, (in the 80's). I started turning again a couple of years ago and went to carbide. One reason is cost of the tools, grinder for sharpening, and all the other stuff needed. I do sharpen my own carbide tips and get a long life out of them. Maybe one day I will save up and add traditional tools to my arsenal. Love your videos and I always learn something new.
You will do a lot less work with more control as well as get a stunningly better finish off the tool with a bowl gouge 40/40
Great presentation. Was still unclear on the benefits of the V flute but don't expect all of the information. Thanks
To be honest... I don't see any from a turning perspective. I think it's easier to manufacture, though.
Thx for this Ashley. You have the perfect name for a woodworker. I just ordered my first carbide tool 5 min ago based on your advice. Keep it up :D
Great explanation! Carbide tools made me lazy, but I’m getting back to the traditional ones. They are more rewarding to get proficient with.
Excellent presentation of the pros and cons. Thank you :)
Very good to see someone making a case for traditional hand turning. Not everyone has the aptitude or time to develop these skills. And yet I have met world class turners that only use scrapers in the traditional sense, being made of medium carbon steel. Also, there are a lot of turners considered to be at the highest level who rough in with tools but actually do most of the work by sanding. If the end result is satisfactory it should be good enough. Not many can afford HSS or carbide tools and the sharpening equipment needed. The sort of cutting edges available in carbide are very limited and custom grinding of HSS is well beyond most people.
Back in the 70s when I was really into spinning wood, I forged all my turning tools with good carbide steel incorporated into the cutting ends. These baby's would go for the longest time without sharpening. Unfortunately, I lost all of these in a house fire.
What was really nice is that I could custom make any specialty gouges needed.
Great explanation about why I need to practice more with my bowl gouges.
If you have a CBN grinding wheel, you can sharpen a carbide tip by grinding the flat side. Thanks for the nice video!
Or a diamond stone
I'm using diamond stone and I still have the same carbide since 2 years. I'm not professional woodturner but I'm using quite often my lathe (minimum 10 hrs a week)
I've only ever used traditional gouges, carbide is $$$$ and after watching this I'll be sticking to traditional 😉 thank you for all of your content it is amazing to see the work you do but also informative like this video.😊
Ashley, good description on the short comings of flat chip carbide tools. I’m a big fan of bowl gouges but also use Hunter Carbide Tools which use a cupped carbide cutter. These tool cut, not scrape, and bevel support is possible depending on the angle you approach the cut. These tools leave a cut that matches my bowl gouges in the correct application.
Thanks Ashley, very clear and concise explanations. That's always refreshing here on TH-cam.
Nice explanation. Yes, I used both of them. The sharpening method video would be good too. Cheers!
All excellent points. I use carbide because I started making pens on a midi lathe and although I learned to make bowls with gauges my shop is extremely small so using gauges means buying a grinder, jig, etc. no room. I make small projects so the carbide works for me for now. If I had more room I would do things differently. It boils down to do what works for you. Love your vids.
You don't have to throw away the carbide tips. Lay them upside down on a diamond stone and push the back and forth and in circles until you have brand new sharp edges. Use non ammonia glass cleaner which is much cheaper than the Trend fluid to lubricate the diamond stone.
That was going to be my next video haha. Thanks buddy
I started out on a spring pole lathe with hand tool gouges lol.... I learned what I needed to and after 8 hours and a piece of hickory I had a bowl.... 2 weeks later I got my cheap HF Lathe and tools and learned about bowl gouges..... Fast forward 5 years and I have some sub par tools and only 1 round carbide cutter. Woodworking is in my genealogy and my blood.... Always wanting to learn more and you have helped progress my knowledge. Keep the good content coming 😁
I use both traditional as well as carbide tools and they both work very well. You can in fact sharpen carbide tools. To sharpen carbide tools simply remove the cutter and use a diamond grinding card and rub the top of the cutter on the diamond sharpening card.
Tomorrow's project!
I just bought a lathe a couple days ago. Was really interested in the carbide tools because I had heard they were easier, and I don't know anything about sharpening. I'm glad I decided to get steel tools.
Very informative and professional video. Thanks for sharing your knowledge!
This is really helpful thank you - why the hell is TH-cam blurring out the V shaped tool close up at 6:40???
Nice presentation ,you put in a lot of good usefull information in a short time ,very well done
VERY well explained! Thank you for educating me.
Glad it was helpful!
The best explanation I've heard!
Very informative. Nice presentation.
Outstanding educational tool for all us beginning wood turners. Thank you so much.
Thank you for sharing your time and knowledge. I'm just a beginner and it was very appreciated 👍
Ahhhh, this makes way more sense. Thank you for the explanation.
Excellent presentation Ashley. Thank you for sharing. Have a great day and stay healthy.
I love the gouges I bought from you at Christmas. They are fantastic..
Finally a great explanation of the two different kinds of turning tools!
Wow! This was fascinating and very educational. Great video. Thank you! 👍🏼
Great visual of the difference in the way they cut, I will be sending people to watch this when the ask why I don't use carbides.
When I was a kid, my father had a wood lathe that he rarely used. He sold it to a neighbor and bought another professional camera, since he was a professional photographer. I went on to become a fine art photographer, and used that camera through graduate school. Now I am retired and wish I had his lathe, but then I might not be sitting in my nice house now which was the result of a pension I earned as a fine art photography teacher. I will never know. Anyway, I also took ceramics and taught it. Turning wood reminds me of that. I can see myself getting into turning, but it is a whole nother thing. Maybe not. At 72 you have to pick your shots. Anyway, great video. You know your stuff. You remind me of some of the female artisans I knew in graduate school. I rang the bell and subscribed. It should be fun watching your content.
I think you should go for it man! Try the lathe and have fun, life is too short!
@@MatheusRaymundo10 Looks like a lot of fun, and challenging, but I have too many things on my plate and I would have to buy all of the equipment. At this point, there is a high bar to becoming involved with a new medium, and realistically, I probably couldn't practice it for long, being almost 72. In the past year, I have bought a lot of woodworking equipment. That will have to be my alternate medium, photography being number one. As you age, you realize increasing limitations on time to learn and practice a new skill, your finances, and probably your health. I look forward and think, "i damn in 8 years I'll be 80!" I hope to be in great shape, but I may not even be here. If I knew I would be going strong at 100, I might put the time and money into it. Odds are against that. You should learn and refine a life skill when you are young, and then become known for whatever that is. A person has to be honest with himself/herself and think, what do I love enough, have commitment enough, time enough, finances enough, and a big enough place to get into this type of art? Then, they also have to ask, if I do all that, can I make enough money to live the way I want and can I stay committed to it for my entire working life? I would want to become a very skilled craftsman, like Ashley. That will never happen for me with the time I have.
Well done. Have you tried the Hunter Carbide Tools? The cutter is 'cup' shaped so it seems like they would perform more like HSS.
Tool maker machinist here. Love your work knowledge and Videos. Just so you know Carbide can be sharpened with Diamond wheels.
Thank u for the explanation.
Don't hate me but I still prefer the carbide tool.
Great video - I'd already ordered some carbide tools to start learning with, but I'll now order a traditional gouge to experiment with when I've gotten the hang of things a bit. Thank you.
This was a great explanation. Thank you! I just bought a Sorby TurnMaster set the day before this was uploaded and was wondering what I was doing wrong. Most videos make carbide tools sound amazing but this was right on point with my initial experience of them. Bought them to practice hollowing some small vases so, I'm sure I'll use them a bit. Great explanation of traditional bowl gouges too, very helpful.
I turn both wood and metal like BradPow. What I see is the Round carbide is super forgiving as it won't catch a point or edge. You can move in various directions whereas the gouge is directed in a direction. And if you have any epoxy in cracks the HSS won't cut well but the carbide will.
Thanks Ashley! I found this informative for someone that hasn't even really read up on turning...just watched in AWE and Fascination as you and others create such amazing pieces...like your AMAZING ORNAMENTS I SAW ON INSTAGRAM! Crazy Cool! Well done & thanks for sharing! :)
Эшли потрясающе выглядит) и таки да, твёрдосплавы больше подходят для начинающих токарей, только потому, что у них заточка держится дольше, но это совсем не значит, что их не нужно точить, или выбросить и купить новые)) в отличии от таких сталей как Р6М5 или Р18, которые быстро точатся и весьма доступны, но требуют определённых навыков в использовании, в том смысле что если ими неправильно пользоваться, то они быстро придут в негодность, в отличии от твёрдосплавов которыми можно дольше работать, но и проблематично затачивать..
спасибо за субтитры, почтение и уважение мастеру :)++
I used to have so many catches before switching to a 40/40 grind for bowls. Some day I'll upgrade to one of your quality gouges. I still love using carbide insert tools for roughing and scraping, though. If used as a negative rake scraper, I've been able to get very smooth finish with fussy (for me, anyways) wood like aspen.
Very nice explanation. I’ve been trying both lately, and I really do prefer the traditional styles. As you point out - wonderful marketing for carbide.
Hello Ashley, where can I buy the carbide tools?
Ashley, thank you so much for this information. I had been wondering about the value in getting some carbide tools and your details definitely make that decision much easier! I guess I can spend that money on something else, :-).
You're a good teacher.
Ashley,
I love your work!!
Can you pass along some information on the type/brand of face shield you use and the type your students use during your training seminars.
I noticed that yours has a breathing apparatus that I think would be very helpful, especially for those of us who constantly battle with sinus issues.
Thanks again and keep doing what you do.
It's on her webpage
I use a Sundstrom- and yes, it’s available on my website. We turn almost all wet wood during classes, do there isn’t a need for this type of PAPR
I find I can use my square car bide tip lin a different way than scraping. I turn pen blanks and spindles by using the bevel underneath and bring the cutting edge down until I get a pealing cut. ( I also begin by rounding the corners a little with a spindle roughing gouge)
Very clear explanations. Thank you.
Great information.
After 30 years of turning I have finally got a variable speed lathe. What is the best speed to start with when turning a bowl? Thanks for all you informative videos.
It depends on the size and shape of the bowl blank. I go as fast as the blank will turn without vibration.
@@glencrandall7051 thanks
Garry not Linda. Check out the Turn A Wood Bowl TH-cam Channel and/or website. Kent recently did a video on turning speeds but he's a wealth of information on all aspects of bowl turning. I have no connection but am a recent subscriber and have been mining his channel for about a month now.
Thanks I'll check it out
Super timely video. Thank you for the overview!
Thanks for watching! I thought it might be helpful with Christmas coming up soon...
You answered a lot of my questions.
Thank you so much.
I was hoping you would go over what's better for turning resin. Carbide vs steel
Can you comment on negative rake carbide cutters-are they really better for finishing relative to a standard carbide cutter?
Why was the V-shape 6:38 shaded out? Great video though.
Copyright issues 😕 Sorry about that!
@@AshleyHarwood aha
This video answered so many questions
Carbide can be sharpened easily too.
Thanks for he great explanation of differences betwen gouges
Superb video. Thank you
Do you happen to have a traditional store front I could visit while I'm in Charleston? Any where I could see your work? A shrine maybe? I'll be there for a few weeks for work and would love to see your work in person.
What brand of quick change handles do you use ?
I'm interested in your faceshield / helmet / air filtration system....? That looks interesting considering how much sanding I do.
What brand traditional turning tools do you like best? Robert Sorby, etc.
Your videos and content are pleasantly awesome 😊
🤔 What triggered you to realize wood turning was the "calling" for you?
quick question why was the V-shaped gouge fogged out?
Just a guess on my part but I believe Ashley has a sponsorship arrangement with a particular tool manufacturer so she needs to blur out a competitor's tool. Again...my guess only.
You are simply amazing!!! Thank you for sharing so brillantly your knowledges 🙂🙂🙂
Aslhey megustan tus videos no me pierdo ninguno aprendo más y más a conocer de ese maravilloso trabajo gracias por subir más videos saludos
Great explanation. Thanks for the video!
Ashley, as always an excellent demonstration. I am a fan of both tool types, however I think each has their place. I can't cut a bowl with anything other than a gouge...I just love how the gouge works and the cut is so clean when done right. That said...if I do any king of lipped bowl or vessel...I have never been able to get a gouge to do the job right. There always seems to come a time when I just can't get the right angle to start the cut properly with lipped bowls and especially vessels. I've been told it IS possible to hollow with a gouge, though. What are your thoughts on that? If you are hollowing a vessel, do you still use a gouge?
As a follow on to that question...if you do use a gouge, which kind? I've recently wondered if a bottom gouge might work better on the hollowed out sides of a bowl/vessel, as it seems similar to gouging the bottom of a bowl... A bottom gouge is one of the few tools I do not have yet...
Becoming a huge fan from sri lanka ♥️
I am just curious, what is the larger old lathe behind you in this video? Do you ever use it for turning? It looks like the nameplate might show Oliver, but I am not sure.
I hope I can meet this wonderful woman one day before I die.
Me gusta mucho tu video esta muy muy bien
I design metal working tools and it seems to me, the only real problem with carbide vs hss word turning tools, is the lack of a proper insert holder, or more traditional style insert holder (well aswell as more variety in insert shape), to allow the free form techniques that you suggest, or a solid carbide traditional formed tool would work as well...though it'd be prohibitively expensive....Nice video!
Ash
What brand of traditional tools do you recommend?
I’m kind of biased there as I have my own line of tools now. I will tell you that I’ve made every effort to make them the absolute best they can be.
@@AshleyHarwood Lets chat about that then. Shoot me an email.
Great Video! Very informative!
HSS gouges are like a manual transmission. Takes more to learn but so much more fun when you do! 😁 Was just today looking for a spindle gouge that didn’t have a super long flute. Less flute may mean less steel that can be sharpened, but it means a more rigid tool - especially when they’re often narrower to begin with. Do you have any brands/models you like for a spindle gouge?
One of the nice things about the conventional gouges is that with a little work they can have any of the well known cutting shapes. You can go from the more or less conventional grind to the 40/40 to the Irish to the more radical swept back grinds. If you ask any pro turner about specific brands you will get their favorite. But in 40 years of turning I believe they all use pretty much the same steel.
Sorry, to clarify, I mean how far down the length of steel they grind the flutes. I’d rather have a tool that lasts me 10-15 years of sharpening and is rigid than lasts me 20-25 but chatters more. But all of the ones I’ve been looking at have the flutes ground most of the length of the steel.
Chatter is dependent on the diameter of the tool and how much of the tool overhangs the tool rest. If you are getting chatter move the tool rest closer to the work piece. Or if necessary get a larger diameter tool. Of course you must have a sharp tool too. I don't think the length of the flute will be that significant.
I watched a Stuart Batty demonstration where he showed two like-diameter tools with different flute lengths and showed it does matter.
Stuart could detect chatter when turning a toothpick. I spoke from my own experience.
Well done. After forty years of turning (and learning daily..) this is a fine explanation. I have never seen any use for those over priced carbide tools...
Do you sell a roughing gouge at all?
very good video
Where did you buy your bol gouge? You can take the top of? never seen that before #beginner
I turn with EWTs exclusively. The deciding factor was the extra cost involved with traditional tools; a slow speed grinder, tool jig, and 2 CBN grinding wheels I can buy a lot of inserts for that total cost!
Nothing could be further from the truth...
I use a $60 high speed grinder with white wheels, no jig, none needed. Very low cost set up. In fact I have used it for four decades. Using those carbide tools is not turning, it is bludgeoning the wood into submission and then requiring copious amounts of sandpaper. Traditional tools are by far the more cost effective but most folks are unwilling to learn proper technique...
But, to be done properly, all the afor mentioned tools are needed.
As I read your comment, it leads me to believe you grind perfect bevels and sweeps by hand, not hardly.
@@johnwallace4408 No, no they are not. If that were the case how did anyone accomplish fine turning prior to their invention..??? And you do not need sharpening jigs, they are a waste of money. The very same motor skills one uses to turn freehand. And "perfect" bevels are not required, just functional and sharp ones. Production turners have sharpened freehand forever, it just takes a bit of practice. I also freehand my plane irons, knives and chisels.
@@johnwallace4408 I do not know the man, but in 4 decades of use I would expect he has be come proficient with freehand sharpening. And presuming you have a use for chisels, putty knives, screwdrivers, etc you do have a grinder.
It is still turning when using CARBIDES. Be open minded enough to accept change. That is how progress is made.
Not all carbide tools cut by scraping. The Sovereign Ultima Hollowing System for example cuts in very much the same way as a traditional bowl gouge.
Except it has a guide to adjust the depth of cut.
And the insert tip can be re sharpened. The insert in fact is shaped like a tiny "bowl".
Why'd you blur out the V-shaped flute? LOL Was it too risqué?
Or did yewtoob dew it?
I would assume some algorithm found problem with it, so she blurred it out to save the monetization.
Carbite can be sharpen on diamond hone.
Hello what kind of wax do you use for Wood drying?