ฝัง
- เผยแพร่เมื่อ 10 ก.พ. 2025
- Understand wiring, Ridley automatic small motorcycle. Most Speedster/ Sport wires are clearly marked only requires taking the time to rematch them together. Over time there has only been one wire come loose in a wire connecter. That caused an intermittent starting problem. There are 2 red wires with white stripes connecting to the main fuse block. The lower red/white wire is from the ignition switch in its light position. The top red/white feeds the 4-relay pack mounted on the rear fender.
Thanks for watching and reading. Please subscribe, leave a like and a comment. KT
Разбираемся с проводкой маленького мотоцикла Ридли. Большинство проводов Speedster / Sport имеют четкую маркировку, только на то, чтобы найти время на их повторное соединение. Со временем в разъеме отсоединился только один провод. Это вызвало периодическую проблему с запуском. К главному блоку предохранителей подключаются 2 красных провода с белыми полосами. Нижний красно-белый провод идет от выключателя зажигания в его светлом положении. Верхний красный / белый питает 4-реле, установленное на заднем крыле.
Спасибо за просмотр и чтение. Подпишитесь, оставьте лайк и комментарий. KT
Hello, my older Friend!!
Your video is Fire!!
Plus the music..... + !!
Спасибо, Алекс.
@@KT111 , how are you?!,,,,,,,
@@Gazovchik Делать добро. Уборка в мастерской.
Is it the same for Autoglide?
Thanks for the comment. The Autoglide is different. Try a search for Wiring Schematic (2006-2007)- Ridley Motorcycle PDF. That should be very close.
Do you have a wiring diagram of this setup. . I'm having issues with spark and I want to replace with simple components as I've had 3 digital boxes go bad.
Hi BK, is it the 4-relay pack you are having problems with?
I traced the wiring for my wiring diagram. On the left side below the seat there should be a wire bundle with 10 wires zip tied to the frame. Crimped connectors are there. Most electrical problems will be loose wires in that location. The ground wire for the magnetos is the gray with a black stripe. If that connector is cut, the mags will be on and there should be spark. A single pole single throw switch can be used on the gray/black wire going to the front of the bike. Switch ON will ground the magnetos, no spark. Switch OFF will remove the ground and it should have spark. There is a 1N-4007 diode at each magneto slip on connector. Under the frame below the seat post there should be three numbers stamped. If I know the number, I can help more.
My starter won't ingage.have everything else. Relay clicks with start button
The rear brake must be depressed for the starter to work.