Prior to a Rock Drill with the Division Commander I was walking some younger troops through it. Talking them through the maneuvers I said "the tank will go to this position and the tank will go bang!, then move to this position and the tank will go bang! I didn't know the Division Commander was walking behind me when he tapped me on the shoulder and told me I had it all wrong. He said, "Sergeant the tank will move to this position and the tank will go BOOM!" Two lessons learned that day. Tanks go BOOM not bang and when your troops seem unusually attentive check your six.
That bit about the compensation for the fin stabilized rounds was really interesting. I never really thought about it, so I would have answered wrong. After hearing you explain it, it makes all the sense in the world. That was super cool, thank you. I really enjoyed that, along with everything else.
A similar thing happens with an RPG, specifically with the PG-7V rocket, in that it ends up turning _into_ the wind. I think the mechanism is a little different, since there aren't really any substantial fins on the rocket I think it might have something to do with a lift force being produced when the air moves sideways across the round body. It tends to make an already inaccurate weapon even worse.
@@Laotzu.Goldbug rpg rounds do have fins which extend once the rocket leaves the barrel, they run a substantial length of the narrow rocket part, thus very highly affected by wind.
It really doesn't make sense though, because there is no forward acceleration on the round once it leaves the gun tube. The round is not a rocket. Therefore, any yaw of the round should not have an effect of the direction of the velocity of the round, all forward force has already been applied. This phenomenon only makes sense when the projectile still has forward acceleration after being affected by the wind, such as an RPG rocket. I wonder if there is more to this explanation.
@@hjalmar4565 Maybe think about the physics before just saying I'm wrong. Ignoring air resistance, rotating an object while its traveling with 0 acceleration will not result in a change in the direction that object is traveling. So there has to be some other force acting on these shells other than what the Chieftain stated, or perhaps he got it wrong. No one is 100% right 100% of the time.
@@therogueadmiral only the sheman would roar, the M1 howls and post Vietnam war IFVs like the Bradley are generally far quieter than they have any right to be for their size... especially from the front! (Personal experience of beeing chased down by CV9040s and a CV90 ARV on several occations.... on foot. ) You feel them through the ground long before you hear them, and you can't ident the direction they come from by the feeling alone...
@@brianreddeman951 It is very unprofessional if the presentation is followed with models or pictures pointed with a finger. BTW. Polish/Czech APC was called SKOT. While "S" stands for "Sredni" - a medium sized, it was one of the biggest if not the biggest APC of its time. OT-64 was a Czech name for it but both were in use in two countries. SKOT was was a very modern vehicle in the middle of '70s. Almost all (weak armor, weakly armed)of today's designing standards SKOT filled 50 years ago. Apart from the crew of 2 or 3 men, SKOT was able to take 10 soldiers onboard.
One thing to keep in mind about muzzle brakes is that they are somewhat dependent on the mass of gas relative to the mass of the bullet. Putting a brake on a .38 Special (relatively small powder charge, low pressure, big bullet, especially in the original 200grain loading) would make little difference in recoil. Putting a brake on a 5.56x45 with the 55grain loading makes a much bigger difference because there's much more mass of gas (at higher pressure) to operate against the brake.
Drivers have it best far as where to sleep ( now days that is) in a Bradley you just pull a lever and the back rest drops . Use whatever to get it at the angle you want and sleep. To drive all you do is sit up, pull up the backrest , done. Good vid.
Grandpa remembers saving French soldiers with OT-64 who were stuck in some fire engagement in Kosovo (KFOR mission). There was a narrow, muddy road. Driver had to back up several hundred metres, because the risk getting stuck/fired at when turning around was high. They came in, loaded Frenchies and got away.
Only to receive concussions from the main gun being fired. Other than canister, the Abrams doesn't have a low pressure round. I think I heard something about the new multi fuse round being less terrible. You'd think after nearly a decade of insurgent warfare, we'd make some minor changes to actually make tanks useful.
Thank you very much. I found that genuinely fascinating. The bit about thermal shielding on the gun and how a bore evacuator works I found particularly interesting.
That's a nice and educational way to show off your models :) thanks for another great vid. I agree - building scale models is a fun way to get more familiar with the different parts of a tank. I highly appreciate companies like Tamiya who take the time to label the parts in the construction manual. It's also a good excuse for me to look up both technical drawings and photos of the tank to make sure that all the details are there, and do a bit of research on the history of the vehicle and the experience of its crew. I always make it a point t learn something about the tank and its crews whenever I finish a model.
M1 bustle = Female cod-piece, Best line ever! That was hysterically brilliant. ~_^ As a retired SFC senior service school instructor I taught M1 Turret/Fire Control repair DS/GS at Vilseck, Germany 7th Army Training Command and USAOC&S APG Maryland. It never gets easier trying to explain the basics, great video.
Love the old school knowledge drop just using the models for illustrative purposes. Definitely worth the watch for the tip that the wind pushes the finned sabot round up wind. Very cool!
Can you give us a watered down, wont get in trouble with the Army version of how armored operations work? How you go about going outside to do tank stuff, how doing tank stuff works, maintenance, resupply, going back for the next guys to go out and do tank stuff, etc. Aircraft get a mission, sortie, and then come home, but ships are out for months at a time doing things. I imagine tank stuff is somewhere in between the two?
"Aircraft get a mission, sortie, and then come home, but ships are out for months at a time doing things." At one point the Air Force wanted nuclear-powered bombers that would orbit the North Atlantic for weeks on end. I imagine serving on one of those would be like a submarine crew, except with windows, but all you see is clouds and the ocean surface.
That is obviously larger than a 20mm. Looks like a 30mm. A 20mm isnt that much bigger than a .50, and usually has a larger length/width ratio. That and the standard 20mm case in the west is 20x110mm which has a much longer case relative to the round. That thing is way too short and thick, and it has almost no neck.
Chieftain - many thanks for addressing that question I put to you about the front / rear location of the drive sprocket over Christmas. I kept seeing vehicles with front sprockets during your quick museum tours and it was driving me nuts why they would do that from an engineering standpoint!
there are various reasons, but originally it was mostly because the transmission needs to be where the drive wheels are, and so do the steering brakes and/or differential. It is difficult to run clutch and shift and brake linkages all the way from the front to the back (part of why T-34 has terrible shifting and clutch feel). This is still a problem in cars with rear transaxles, and it is rare for these cars to have shift and clutch feel as good as conventional cars. The benefits outweigh this. When tanks went to automatic transmissions, hyrdaulic systems improved, and control diffs took over a lot of duties from the brakes, so it became much easier to put the drive system in the rear, so most tanks and AFVs do now.
I think that we need at least one video showing off The Chieftain's new house, or at least his office. It could be called "Inside the Chieftain's lair". We also need an Inside the Chieftain's Hatch video of your desk at your NG job. It's rare that people actually get to see the inner workings of an actual tactical military desk. :D
Good stuff, thank you. "Bore evacuator" definitely sounds more technical than what I've always called it: "that weird tumor thing in the middle of the barrel"
Awesome thank you for great video. I wish you would elaborate a little more on advantages vs disadvantages of FWD("Front Wheel Drive" rear engine aka Renault 17 configuration) tanks vs RWD pluses and minuses. As for the future video there is a lots of debates of having turret basket vs not, as well as when "Gunner TC override" feature happen(I would think end of WWII) an inside on those subjects would be great. BTW, love that "Black Knight" on the shelf! And thank you, once again.
I was on first-gen Bradleys which were supposedly amphibious (we never tried), so they had a huge trimvane on the glacis. When it was fully extended as it would be to install the 25mm barrel or PMCS the powerpack it made a nice place to sleep, almost like a Lazy Boy recliner. Not quite as nice as the various spots on a 113, but good enough.
Probably the most common question I get asked about tanks is how do you get power from the hull to the turret since the turret spins. I know they use a variation of a slip ring but explaing about powered rails and brushes tends to make peoples eyes cross. Maybe you could do a video and explain it better.
The Tank museum at Bovinton recent series "the Matilda Diaries" shows a teardown of the turret rotary joint with combined electrical & hydraulic layers, in the turret electrical systems video with clear explainer and excellent video work. A good, simple 1938 design example that's easily comprehensible. Probably better than nick could, due to pro editing team and their resources on hand. His commentary on the video with David Fletcher would be great tho, especially if linked to his own Matilda review some time ago.🙂
Thanks love your work. Be really good to hear you speak about basic TTPs, e.g. commanders appreciation, fire orders, wine glassing/jockeying ( not sure about the US nomenclature for this stuff but guessing you’ll get what I mean) and the like I.e. the basic low level, stuff the crew does to get the tank into favourable fre positions and steel on target.
I understood it immediately because model rockets behave identically, they always turn into the wind when you launch them, and then drift with the wind when the high-drag recovery device deploys (that's the parachute, streamer ribbon, helicopter blades, or whatever else makes the rocket not come down at high speed)
I vaguely remember bore sighting the M109 back in my Army Guard days. Later I learned to color inside the lines, went active duty Air Force and flushed most of that artillery stuff out of my noggin'.
As a note, the hot trend in 1:35 military vehicles is 1000+ piece kits with FULL interior. That is, crew compartment, drive, engine, ammo, everything. So far I've seen Panther, JagdPanther, Tiger, T34, T60, M3 Lee/Grant, SU-122, SU-85, and probably others. Not for the faint of heart.
I can deal with that. It's the 500-piece track links which I find are over the top. Sorry, but I don't need to have each individual end connector and center guide modelled. If I wanted it, I'd buy aftermarket.
Enjoyable, for sight/gun alignment would you consider similarly detailing say Sherman and Pershing. Just read 740 tank battalions with mixed 76mm and 75mm Sherman after action report 1945, very sobering. “9th April 1945 At G178708 Lt. Loopey (3rd Plat) destroyed two 70-ton Jadtiger tanks w/128mm guns. At ,elschen Ennest the Pl4,t set up road blocks and remained for the night”. In February 1945 they claimed a Tiger 1 confirmed by the infantry support. Worth a read it does appear they alone destroyed 3 tiger vehicles.
Not a a"bullet" it is a cannon round. There is no bullet in that object he is holding. A bullet is a solid projectile fired by small arms. It is the part of a cartridge that actually leaves the gun to fly to the target. A cartridge or 'round' is a bullet and propellant case and primer assembled in a unit (what ignorant people and the media call a "bullet"). That is a 30mm cannon cartridge, with a shell instead of a bullet, casing and primer. No bullets involved.
Muzzle reference sensor is not the only radioactive part of the tank....the depleted uranium plates they added to the Chobham armor are also radioactive (mildly).
@Mathieu Morin Depleted just means that almost all the fissionable U-235 has been processed out. However, it still emits alpha radiation; which can be blocked by a sheet of A4 letter paper.
Chieftain, I really enjoyed this. My fascination with enclosed tracked vehicles, not just tanks, is vision and the drive train (suspension, steering, and engine cooling mainly). I have encountered the term "panoramic periscope" but I do not really understand what the term means. I am fascinated by the different steering technologies used, the various suspension systems used at different times by different countries, and just what constitutes "weak" vs "strong" track. I hope future lectures might get into some of these details?
My father was a Gvozdika driver. According to him in the winter they would shut off as much as they could, keep the radiator on and snuggle up like worms in their positions and laugh at the infantry outside. Similar story with the BMP-23 just that you could lie down and sleep in the relatively spacious "passenger" compartment.
It is indeed the OT-64, more precisely the OT-64 SKOT with SKOT being either Střední Kolový Obrněný Transportér or Średni Kołowy Opancerzony Transporter, which means medium wheeled armoured transporter.
Did I just hear a Ballistic Meteorology class in the middle of the video? I did! And I just thought the Red Legs was only ones who knew that. I guess tankers learned it too! Man I miss Field Artillery.
Heh! I did my compulsory service training as a radio specialist in a 120mm mortar platoon of a mechanised batallion, and if there is one unit especially dependant on accurate meterology, it's the batallion level heavy mortars...
I had a friend in the motor pool - did Humvees over in Iraq. If they had an oil leak, they'd take one of the engine/drivetrain crates from the stack to the ceiling and replace the whole thing. Which was faster than fooling around with changing a valve cover gasket.
@John Fulghieri-- DU is a lot less radioactive than NU, but U235 accounts for only a very small fraction of the radioactivity of natural uranium. The rest comes about equally from the U238 and its decay product, U234. The latter gets swept out during the enrichment process, along with the U235.
Donald Palmrose is correct. Also found in an M1 Abrams is : Thorium oxide in combustor liner in the turbine engine. DU (Depleted Uranium) ammo M829 series DU APFSDS-T. DU in the armor of M1A1 "Heavies" and M1A2 , identified with a U at the end of the serial number. A thermal imaging window "may" contain thorium- not sure if this is specific to an Abrams though. Self-luminescent sights, dials gauges probably contain radioactive material. Source: Radiological Sources of Potential Exposure and/or Contamination TG-238 U.S. Army Center for Health Promotion and Preventive Medicine 10 December, 1999
24:30 also having the engine at the front means that anything that does make it thru the Armour at the front still has to get thru an engine block before it hurts you not great for the engine tho... :P
I loved the talk about sleeping on the Bradley when you have dismounts. I’d be hated by my infantry if I was a Bradley commander. I would literally tell my dismounts “bitch please, this is my vehicle, you just ride in it. You are the poor bastard who got the infantry duty, you can pitch your tent out there and sleep in the dirt 🤣”
Is the aim off to compensate for weather cocking intended to adjust the where the round strikes or to adjust the angle at which the round strikes the target? I don't expect anything but a hurricane is going to move the impact point much at the velocities and flight times these things have but I think maybe a slight off angle may affect penetration.
Having fired a 3,5cm twin AAA makes me understand the reason for the bore evacuator quite well! (Almost no breathing for 30 seconds after firing a salvo... and this while sitting on there without any roof ) But i would have thought that on modern tanks there would be some kind of measuring equipment on the muzzle like AAA guns do have to measure the projectiles. (Also the "weather info input" reminds me heavily to this time of my life)
That muzzle velocity measuring gear is for airbursting ammo. Most tanks don't have that. Artillery does, as well as having some fancy tricks where they try to get all the shots to land at the same time where knowing exactly how fast that specific shell is flying is important.
Chieftain! I love your videos and really enjoyed meeting you a few years ago at a wargaming event. Is there any chance you will be doing a short (or even long!) video on the Italian tank designs of interest and WWII?
Prior to a Rock Drill with the Division Commander I was walking some younger troops through it. Talking them through the maneuvers I said "the tank will go to this position and the tank will go bang!, then move to this position and the tank will go bang! I didn't know the Division Commander was walking behind me when he tapped me on the shoulder and told me I had it all wrong. He said, "Sergeant the tank will move to this position and the tank will go BOOM!" Two lessons learned that day. Tanks go BOOM not bang and when your troops seem unusually attentive check your six.
When doing some simulated dismount drills, instead of yelling “”bang” for rifle shots, we yell “pop”...
That bit about the compensation for the fin stabilized rounds was really interesting. I never really thought about it, so I would have answered wrong. After hearing you explain it, it makes all the sense in the world. That was super cool, thank you. I really enjoyed that, along with everything else.
A similar thing happens with an RPG, specifically with the PG-7V rocket, in that it ends up turning _into_ the wind. I think the mechanism is a little different, since there aren't really any substantial fins on the rocket I think it might have something to do with a lift force being produced when the air moves sideways across the round body. It tends to make an already inaccurate weapon even worse.
@@Laotzu.Goldbug rpg rounds do have fins which extend once the rocket leaves the barrel, they run a substantial length of the narrow rocket part, thus very highly affected by wind.
It really doesn't make sense though, because there is no forward acceleration on the round once it leaves the gun tube. The round is not a rocket. Therefore, any yaw of the round should not have an effect of the direction of the velocity of the round, all forward force has already been applied. This phenomenon only makes sense when the projectile still has forward acceleration after being affected by the wind, such as an RPG rocket. I wonder if there is more to this explanation.
@@whitephosphorus15 Maybe because you are wrong and you don't need a forward acceleration?
@@hjalmar4565 Maybe think about the physics before just saying I'm wrong. Ignoring air resistance, rotating an object while its traveling with 0 acceleration will not result in a change in the direction that object is traveling. So there has to be some other force acting on these shells other than what the Chieftain stated, or perhaps he got it wrong. No one is 100% right 100% of the time.
What a cool video. However I am a tiny bit disappointed you didn't move one of the models going "vroom vroom".
I feel like, with one of these vehicles, it wouldn't be "vroom vroom" but "roar, roar!"
@@therogueadmiral only the sheman would roar, the M1 howls and post Vietnam war IFVs like the Bradley are generally far quieter than they have any right to be for their size... especially from the front! (Personal experience of beeing chased down by CV9040s and a CV90 ARV on several occations.... on foot. )
You feel them through the ground long before you hear them, and you can't ident the direction they come from by the feeling alone...
He's more of using a light canon round as a pointer kind of guy 😅
@@brianreddeman951 It is very unprofessional if the presentation is followed with models or pictures pointed with a finger.
BTW. Polish/Czech APC was called SKOT. While "S" stands for "Sredni" - a medium sized, it was one of the biggest if not the biggest APC of its time. OT-64 was a Czech name for it but both were in use in two countries. SKOT was was a very modern vehicle in the middle of '70s. Almost all (weak armor, weakly armed)of today's designing standards SKOT filled 50 years ago. Apart from the crew of 2 or 3 men, SKOT was able to take 10 soldiers onboard.
"Female version of a codpiece or something...". I almost spit out my morning coffee and howled at that one! Best line in this one!
One thing to keep in mind about muzzle brakes is that they are somewhat dependent on the mass of gas relative to the mass of the bullet. Putting a brake on a .38 Special (relatively small powder charge, low pressure, big bullet, especially in the original 200grain loading) would make little difference in recoil. Putting a brake on a 5.56x45 with the 55grain loading makes a much bigger difference because there's much more mass of gas (at higher pressure) to operate against the brake.
I would personally love to see some steel beasts content on the channel from your perspective. One of my favorite sims!
I agree!
Same!
Given that he works for Wargaming, I don't see him advertising another company's games.
Never mind, he said he might have to. I stand corrected.
Ohay, its Miles!
Drivers have it best far as where to sleep ( now days that is) in a Bradley you just pull a lever and the back rest drops . Use whatever to get it at the angle you want and sleep. To drive all you do is sit up, pull up the backrest , done. Good vid.
I wasn't a tanker but I may have fallen asleep once in the driver's seat of an Abrams...
Thank God you have dropped the rock music.. a tranquil presentation. Well done.
Outside the Chieftain's Hatch but it's how everyone sees him compared to the size of the tanks he reviews.
Grandpa remembers saving French soldiers with OT-64 who were stuck in some fire engagement in Kosovo (KFOR mission). There was a narrow, muddy road. Driver had to back up several hundred metres, because the risk getting stuck/fired at when turning around was high. They came in, loaded Frenchies and got away.
yes, i love building scale tanks too. pretty awesome that you built and painted the "barley legal" abrams that you served in.
As always, very informative and entertaining. Thank you very much.
Don't forget about the cold, wet infantry huddling around the rear of the Abrams soaking up the heat from the engines.
Only to receive concussions from the main gun being fired. Other than canister, the Abrams doesn't have a low pressure round. I think I heard something about the new multi fuse round being less terrible.
You'd think after nearly a decade of insurgent warfare, we'd make some minor changes to actually make tanks useful.
@@johnharker7194 I say we cover them in machine guns.
Proper lecture on a proper subject
Thanks Chieftain , as always entertaining and very informative. I am always appreciative of the information you provide.
Thank you very much. I found that genuinely fascinating. The bit about thermal shielding on the gun and how a bore evacuator works I found particularly interesting.
That's a nice and educational way to show off your models :) thanks for another great vid. I agree - building scale models is a fun way to get more familiar with the different parts of a tank. I highly appreciate companies like Tamiya who take the time to label the parts in the construction manual. It's also a good excuse for me to look up both technical drawings and photos of the tank to make sure that all the details are there, and do a bit of research on the history of the vehicle and the experience of its crew. I always make it a point t learn something about the tank and its crews whenever I finish a model.
Great vid as always, and glad to see that you’ve gotten your office together!
M1 bustle = Female cod-piece, Best line ever! That was hysterically brilliant. ~_^ As a retired SFC senior service school instructor I taught M1 Turret/Fire Control repair DS/GS at Vilseck, Germany 7th Army Training Command and USAOC&S APG Maryland. It never gets easier trying to explain the basics, great video.
Is that the Black Knight of Monty Python on the shelf there?
he is a man of culture, as you can see
The alternative version of the challanger 2 xD
Yep
Nex episode will include the Holy Handheld Anti-Tank Grenade Launcher of Antioch.
@@Kharmazov I'm surprised the Beast of Caerbannog isn't an emblem yet.
Love the old school knowledge drop just using the models for illustrative purposes. Definitely worth the watch for the tip that the wind pushes the finned sabot round up wind. Very cool!
Can you give us a watered down, wont get in trouble with the Army version of how armored operations work? How you go about going outside to do tank stuff, how doing tank stuff works, maintenance, resupply, going back for the next guys to go out and do tank stuff, etc.
Aircraft get a mission, sortie, and then come home, but ships are out for months at a time doing things. I imagine tank stuff is somewhere in between the two?
Basically, if you've ever said "I dont want to bore you with the details", Im curious to hear about it.
@@Halinspark agreed.
@@Halinspark Come on, just download some old Army field manuals. Basic tactics don't really change, older stuff is still applicable.
Call your local Guard unit and find out if your state has a Armored Battalion. Sign up and do a couple years and get first hand knowledge.
"Aircraft get a mission, sortie, and then come home, but ships are out for months at a time doing things."
At one point the Air Force wanted nuclear-powered bombers that would orbit the North Atlantic for weeks on end. I imagine serving on one of those would be like a submarine crew, except with windows, but all you see is clouds and the ocean surface.
Nice 20mm pointer. Also thanks, I actually watched paint dry on your channel, new videos are always welcome.
its a 30mm from the M230
BROTHER!!
That is obviously larger than a 20mm. Looks like a 30mm. A 20mm isnt that much bigger than a .50, and usually has a larger length/width ratio. That and the standard 20mm case in the west is 20x110mm which has a much longer case relative to the round. That thing is way too short and thick, and it has almost no neck.
"I assume, being rifleman, they will just sleep in the mud."
Cries in 0311*
If you're an 03, you have to sleep in the sand. Only 11Bs should get the privilege of mud.
It really does seem to be that a tank is best place to be on a battlefield...
Very useful. Especially about the fin round. Cheers.
Great video as usual! Thanks again!
Love the models.......very cool.
I started building armor models to learn about them. Great way to do so.
Great explanation and video.
Maybe you could put a sign on the side that says "Not a tank please don't shoot"
In thirteen different languages. While i’m at it, I shall speak to a fashion designer about hats.
Chieftain - many thanks for addressing that question I put to you about the front / rear location of the drive sprocket over Christmas. I kept seeing vehicles with front sprockets during your quick museum tours and it was driving me nuts why they would do that from an engineering standpoint!
there are various reasons, but originally it was mostly because the transmission needs to be where the drive wheels are, and so do the steering brakes and/or differential. It is difficult to run clutch and shift and brake linkages all the way from the front to the back (part of why T-34 has terrible shifting and clutch feel). This is still a problem in cars with rear transaxles, and it is rare for these cars to have shift and clutch feel as good as conventional cars. The benefits outweigh this. When tanks went to automatic transmissions, hyrdaulic systems improved, and control diffs took over a lot of duties from the brakes, so it became much easier to put the drive system in the rear, so most tanks and AFVs do now.
Nice pointer you got there.
Nice, good point on why parts go where and what they are, I'm building a pair of Tigers, so much tools!
I think that we need at least one video showing off The Chieftain's new house, or at least his office. It could be called "Inside the Chieftain's lair". We also need an Inside the Chieftain's Hatch video of your desk at your NG job. It's rare that people actually get to see the inner workings of an actual tactical military desk. :D
"None shall pass" - good to see you appreciate the classics 😉
Good stuff, thank you. "Bore evacuator" definitely sounds more technical than what I've always called it: "that weird tumor thing in the middle of the barrel"
I like that you use a dummy 30mm cannon round as a pointer.
The 155mm gas extractor has spring operated check ball bearings on the rear holes.
Thank you for the video. I always learn something new here. Take care! :D
Cool models!
Instructive vidéo. Thank you very much
3 people i could listen to all day: Gun Jesus, Mr Fletcher and Tank jesus.
Very interesting. Thanks for sharing
Oh holy fuck!!! Old DS tanker here.... Presently working as an air traffic controller but not getting paid. Love you, brother,
Awesome thank you for great video. I wish you would elaborate a little more on advantages vs disadvantages of FWD("Front Wheel Drive" rear engine aka Renault 17 configuration) tanks vs RWD pluses and minuses. As for the future video there is a lots of debates of having turret basket vs not, as well as when "Gunner TC override" feature happen(I would think end of WWII) an inside on those subjects would be great.
BTW, love that "Black Knight" on the shelf! And thank you, once again.
Thanks for explaining wind effect on finned rounds.
I was on first-gen Bradleys which were supposedly amphibious (we never tried), so they had a huge trimvane on the glacis. When it was fully extended as it would be to install the 25mm barrel or PMCS the powerpack it made a nice place to sleep, almost like a Lazy Boy recliner. Not quite as nice as the various spots on a 113, but good enough.
So I like to hear these videos while browsing on another tab, then I heard how wind can affect the trajectory of a round. Cool.
This was posted on my burthday. Best present (for now)
Birthday*
Probably the most common question I get asked about tanks is how do you get power from the hull to the turret since the turret spins. I know they use a variation of a slip ring but explaing about powered rails and brushes tends to make peoples eyes cross. Maybe you could do a video and explain it better.
The Tank museum at Bovinton recent series "the Matilda Diaries" shows a teardown of the turret rotary joint with combined electrical & hydraulic layers, in the turret electrical systems video with clear explainer and excellent video work. A good, simple 1938 design example that's easily comprehensible. Probably better than nick could, due to pro editing team and their resources on hand. His commentary on the video with David Fletcher would be great tho, especially if linked to his own Matilda review some time ago.🙂
But where is the TC's chainsword holder? ;)
Worry not, brother. Emporah provides.
@@SinOfAugust you are a funny guy... I will save the sacrifice of your soul to the gods for last ;)
Ordo Hereticus services requested on isle six, please!
Is that Heresy I hear? *checks* _Yes, someone is guilty of H E R E S Y_
Drive closer brother - I need to hit them with my Chainsword
You had me at Sprockets. "Now is the time on Sprockets when we dance"!
Can't wait for 201
Thanks love your work. Be really good to hear you speak about basic TTPs, e.g. commanders appreciation, fire orders, wine glassing/jockeying ( not sure about the US nomenclature for this stuff but guessing you’ll get what I mean) and the like I.e. the basic low level, stuff the crew does to get the tank into favourable fre positions and steel on target.
Cracking video
I found the bit about the Fin ammo being aimed with the win, initially counter intuitive, but now it makes sense. Something new learned!
I understood it immediately because model rockets behave identically, they always turn into the wind when you launch them, and then drift with the wind when the high-drag recovery device deploys (that's the parachute, streamer ribbon, helicopter blades, or whatever else makes the rocket not come down at high speed)
Great points! And pointer.
I vaguely remember bore sighting the M109 back in my Army Guard days. Later I learned to color inside the lines, went active duty Air Force and flushed most of that artillery stuff out of my noggin'.
As a note, the hot trend in 1:35 military vehicles is 1000+ piece kits with FULL interior. That is, crew compartment, drive, engine, ammo, everything. So far I've seen Panther, JagdPanther, Tiger, T34, T60, M3 Lee/Grant, SU-122, SU-85, and probably others. Not for the faint of heart.
I can deal with that. It's the 500-piece track links which I find are over the top. Sorry, but I don't need to have each individual end connector and center guide modelled. If I wanted it, I'd buy aftermarket.
I love the title!
Enjoyable, for sight/gun alignment would you consider similarly detailing say Sherman and Pershing. Just read 740 tank battalions with mixed 76mm and 75mm Sherman after action report 1945, very sobering. “9th April 1945 At G178708 Lt. Loopey (3rd Plat) destroyed two 70-ton Jadtiger tanks w/128mm guns. At ,elschen Ennest the Pl4,t set up road blocks and remained for the night”. In February 1945 they claimed a Tiger 1 confirmed by the infantry support. Worth a read it does appear they alone destroyed 3 tiger vehicles.
A guy waving around bullet while talking about tank bits for almost half an hour? Hell yeah.
That's too big to be a bullet.
Not a a"bullet" it is a cannon round. There is no bullet in that object he is holding. A bullet is a solid projectile fired by small arms. It is the part of a cartridge that actually leaves the gun to fly to the target. A cartridge or 'round' is a bullet and propellant case and primer assembled in a unit (what ignorant people and the media call a "bullet"). That is a 30mm cannon cartridge, with a shell instead of a bullet, casing and primer. No bullets involved.
Really enjoy the models. Zooming in more would be nice :)
Muzzle reference sensor is not the only radioactive part of the tank....the depleted uranium plates they added to the Chobham armor are also radioactive (mildly).
@Mathieu Morin Depleted just means that almost all the fissionable U-235 has been processed out. However, it still emits alpha radiation; which can be blocked by a sheet of A4 letter paper.
Lots of great info , hopefully it won't be another 2 years till we can view Tanks 103
16:20 this actually blew mind a little. Something simple but I've never thought about.
Same like rpg-7
Nice black knight figure among your models
Chieftain, I really enjoyed this. My fascination with enclosed tracked vehicles, not just tanks, is vision and the drive train (suspension, steering, and engine cooling mainly). I have encountered the term "panoramic periscope" but I do not really understand what the term means. I am fascinated by the different steering technologies used, the various suspension systems used at different times by different countries, and just what constitutes "weak" vs "strong" track. I hope future lectures might get into some of these details?
The Black Knight on the shelf is the perfect bonnet onament for a tank =) "just a flesh wound"
My father was a Gvozdika driver. According to him in the winter they would shut off as much as they could, keep the radiator on and snuggle up like worms in their positions and laugh at the infantry outside. Similar story with the BMP-23 just that you could lie down and sleep in the relatively spacious "passenger" compartment.
Awesome! And very nice models, by the way... Sadly, you can forget keep building them once your child is born...
It is indeed the OT-64, more precisely the OT-64 SKOT with SKOT being either Střední Kolový Obrněný Transportér or Średni Kołowy Opancerzony Transporter, which means medium wheeled armoured transporter.
Having a shell as a pointer is bad ass! wish my maths teacher was that cool.
When you use that shell for that small presentation, what caliber are you going to use in a big lecture?
Did I just hear a Ballistic Meteorology class in the middle of the video? I did!
And I just thought the Red Legs was only ones who knew that. I guess tankers learned it too!
Man I miss Field Artillery.
Heh!
I did my compulsory service training as a radio specialist in a 120mm mortar platoon of a mechanised batallion, and if there is one unit especially dependant on accurate meterology, it's the batallion level heavy mortars...
Snipers, too.
Ah, PzH2k. Served on that fucker for 5 years. Wonderful vehicle.
And you're right about that being a velocity measuring tool on top of the barrel.
Great video! Are we ever gonna see a video where you explain the tactics of tank on tank warfare maybe with historical references?
I had a friend in the motor pool - did Humvees over in Iraq. If they had an oil leak, they'd take one of the engine/drivetrain crates from the stack to the ceiling and replace the whole thing. Which was faster than fooling around with changing a valve cover gasket.
I love how cheften casually uses a round to point out verious tank parts hahaha
One of my uni lecturers studied the ballistic effect of surface finish of rounds, they think about it an awful lot!
The_Chieftain: Its Tritium (H-3), a radionuclide of hydrogen. Trituim also provides lumination in emergency exit signs.
At least emergency exit signs that don't have batteries (like most of them do).
--and the night glow of my handgun sights. ;-)
@John Fulghieri-- DU is a lot less radioactive than NU, but U235 accounts for only a very small fraction of the radioactivity of natural uranium. The rest comes about equally from the U238 and its decay product, U234. The latter gets swept out during the enrichment process, along with the U235.
Donald Palmrose is correct. Also found in an M1 Abrams is : Thorium oxide in combustor liner in the turbine engine. DU (Depleted Uranium) ammo M829 series DU APFSDS-T. DU in the armor of M1A1 "Heavies" and M1A2 , identified with a U at the end of the serial number. A thermal imaging window "may" contain thorium- not sure if this is specific to an Abrams though. Self-luminescent sights, dials gauges probably contain radioactive material. Source: Radiological Sources of Potential Exposure and/or Contamination TG-238 U.S. Army Center for Health Promotion and Preventive Medicine 10 December, 1999
The models were a great way to illustrate the video. If you had an inset with the vehicle full frame it would work even better!
Quite a few of us had hopes of you make tank noises while moving those models around.
24:30 also having the engine at the front means that anything that does make it thru the Armour at the front still has to get thru an engine block before it hurts you not great for the engine tho...
:P
I loved the talk about sleeping on the Bradley when you have dismounts. I’d be hated by my infantry if I was a Bradley commander. I would literally tell my dismounts “bitch please, this is my vehicle, you just ride in it. You are the poor bastard who got the infantry duty, you can pitch your tent out there and sleep in the dirt 🤣”
Finally I know they difference between the btr and the ot64 (and its not just a warsaw pact clone!)
Thanks.
Is the aim off to compensate for weather cocking intended to adjust the where the round strikes or to adjust the angle at which the round strikes the target? I don't expect anything but a hurricane is going to move the impact point much at the velocities and flight times these things have but I think maybe a slight off angle may affect penetration.
The Warrior has an attached tent.. porch thing for the dismounts, driver sleeps in their seat and the turret crew sleep on the back seats.
12:55 bore evacuator, I love the smell of gunpowder in the morning. For that point, any time of day.
Best pointing device ever.
Oh, I noticed that on that shelf behind your head, there are some ample nacelles I wouldn't mind getting my hands on!
i love tanks
Having fired a 3,5cm twin AAA makes me understand the reason for the bore evacuator quite well! (Almost no breathing for 30 seconds after firing a salvo... and this while sitting on there without any roof ) But i would have thought that on modern tanks there would be some kind of measuring equipment on the muzzle like AAA guns do have to measure the projectiles. (Also the "weather info input" reminds me heavily to this time of my life)
That muzzle velocity measuring gear is for airbursting ammo. Most tanks don't have that. Artillery does, as well as having some fancy tricks where they try to get all the shots to land at the same time where knowing exactly how fast that specific shell is flying is important.
I really reccomend the Takom full interior kits for showing interior parts
About a third of the video is about things Soviet and derivative tanks don't have. Now I understand the choice of models for this demonstration.
Chieftain! I love your videos and really enjoyed meeting you a few years ago at a wargaming event.
Is there any chance you will be doing a short (or even long!) video on the Italian tank designs of interest and WWII?
watching this before sleeping so i wont have nightmares
Here's my vote for the inside part using Steel Beasts! Oh and don't forget to fix that mudguard you broke ;)
Great video. As I noticed you have a model of a EMD locomotive behind your head. Looking a like a SD series
SD-40-2, actually. UP 3593, I think I got the sand a little too dark.
@@TheChieftainsHatch nice. I know your a tank guy but never knew you were into railroads as well
Ferroequinology is a long-standing hobby of mine.
@@TheChieftainsHatch Is the SD40-2 UP 3593 in the "Desert Victory" paint scheme?
@@WrightCraig01 It is.