Hi, thank for the super helpful and informative video! We have the same model, however, in our case, the all backlight are black. Do you think replacing them would solve the issue, or it is something more serious?
first of all you need to make sure that the problem is in the backlight and not in the LCD panel, the easiest way to find out is to open the back cover and start the TV, see if the backlight blinks for a moment or lights up constantly.
Thanks! We think it is the backlight, because the screen flashes once we switch the TV on before it goes black, and then we can see some of the visuals if we use a strong light from the front.
Hello! Super helpful video! One question what are you using to remove the frame? Is it just a hard plastic piece or a special tool of some sort? I tried with a credot card but the frame doesnt move at all.. 4:50
Hello, i used tester for led lights , is used specifically for this, I can show you if you are interested. At some tvs like samsung you can detouch mainboard and plug into electricity and led strips will be run lights for test.
çok çok teşekkürler panel bant yapıştırma işi çok güeldi
Hi, thank for the super helpful and informative video!
We have the same model, however, in our case, the all backlight are black. Do you think replacing them would solve the issue, or it is something more serious?
Super super excited SIR VASEEM tq
Question, what is the material of the black piece that is showed to the camera on the minute 5:24?
Its a plastic, quick tip, usually you can find plastic like this one from broken tv, is located between the sheet metal and power board.
Also, what device did you use for testing the backlight? Can I use a multimeter' diode test function for that?
first of all you need to make sure that the problem is in the backlight and not in the LCD panel, the easiest way to find out is to open the back cover and start the TV, see if the backlight blinks for a moment or lights up constantly.
Thanks! We think it is the backlight, because the screen flashes once we switch the TV on before it goes black, and then we can see some of the visuals if we use a strong light from the front.
yes, it seems to be backlight.
@@mmwhitetech Thank you! Do you think it is the light or the controller/driver, considering that all backlight are gone?
Backlight its the problem.
Hello! Super helpful video! One question what are you using to remove the frame? Is it just a hard plastic piece or a special tool of some sort? I tried with a credot card but the frame doesnt move at all.. 4:50
Just hard plastic 😊
Poučné video. Veľká vďaka.
When you tested the led strips, where did they get their power from? Did you plug the cable from the TV into the electricity?
Hello, i used tester for led lights , is used specifically for this, I can show you if you are interested. At some tvs like samsung you can detouch mainboard and plug into electricity and led strips will be run lights for test.
@@mmwhitetechhi what was the voltage for the led backlight? Im having issue with same TV
The powerboard send 42V but no backlight on at all
Thankyou
Probarly defect led diode , just 1 bad , break all .
Bonjour j’ai une philips 58pus6203 ecran noir parfois fait de flash
Pareil, ta trouver la solution ?
Nice video
Добрый день, у меня проблема с матрицей 😢 сколько будет стоить замена? 58диаганаль
What its the problem exactly?
@@mmwhitetech появились полоски на экране вертикальные
Bad, need to replace, too expensive will be.
Helo
🎉
just happened to me and its my friends tv black screen god damn it lol
Hi, can you tell me please,where i can command leds strip backlight for Phillips 58pus6203/12 FZ1A1843079164 Best Regards Thks
Aliexpress
Talk straight