Auto Router Lift (No need program)
ฝัง
- เผยแพร่เมื่อ 29 ก.ค. 2020
- In this video i show you router table insert plate and auto router lift build.
It is implemented using a step motor but without using a complicated MCU (Arduino) & any program. It is very convenient because the height can be safely adjusted even when the router is running.
I used "DCA Router Trimmer AMP02-6 "
Please refer to the following youtube video.
• DCA Router Trimmer AMP...
If you need a drawing, please leave your email address in the comments. I will send you a png drawing file.
If you have any questions, please leave a comment. Let me explain in detail.
Thank you for watching. Hope you enjoyed this video and if you like it, please share and subscribe !
============ Order site (주문 사이트) ==================================
[[[ Stepper Motor (17HS3430) ]]]
www.aliexpress.com/item/40001...
[[[ Stepping Motor Driver : A4988 ]]]
www.aliexpress.com/item/32965...
[[[ Pulse Generator Module NE555 ]]]
www.aliexpress.com/item/20431...
[[[ 5V Regulator ]]]
www.aliexpress.com/item/32998...
[[[ Switch ON-OFF-ON 3 Position : Automatic Reset ]]]
www.aliexpress.com/item/32988...
[[[ Linear Bearing : LM8UU ]]]
www.aliexpress.com/item/32317...
[[[ Linear shaft : 8mm * 300mm ]]]
www.aliexpress.com/item/32332...
[[[ Linear Rod Rail Shaft Support : SHF8 ]]]
www.aliexpress.com/item/32906...
[[[ Bore Ball Bearing Pillow Block Mounted Support : KFL08 8mm ]]]
www.aliexpress.com/item/32996...
[[[ Flexible Coupling : 5*8mm ]]]
www.aliexpress.com/item/32964...
[[[ T8 Lead Screw + Nut : 250mm, Pitch 2mm Lead 8mm ]]]
www.aliexpress.com/item/32507...
[[[ Mini Solderless Test Breadboard + 65pcs jump wires ]]]
www.aliexpress.com/item/32722...
==================== Other DIY Videos ===============================
► 2 in 1 Scroll Saw & Jigsaw Table // 2 in 1 쓰크롤쏘 & 직쏘 테이블 테이블
• 2 in 1 Scroll Saw & Ji...
► Adjustable circle cutting jig for router // 다양한 크기의 원을 만드는 루터 지그
• Adjustable circle cutt...
► Powerful grip force hole-down clamp (Holdfasts) // 강력한 grip력을 발휘하는 홀-다운 클램프
• Powerful grip force ho...
► Adjustable router template jig for square hole // 정확하게 사각형 구멍을 만들수 있는 루터 지그
• Adjustable router temp...
► Ultimate DIY Table Saw Fence // 사용하기 편한 테이블쏘 조기대
• Ultimate Table Saw Fen...
► Drill & Router Bit Storage Tray using Straw // 빨대를 이용한 드릴, 라우터 비트 정리함
• Drill & Router Bit Sto...
► Fully Adjustable Safety Hand Push Block // 완벽하게 조절가능한 안전한 푸쉬블럭(안전밀대)
• Fully Adjustable Safet...
► Resizable Finger Joint Jig // 크기 조절가능한 주먹장 지그
• Resizable Finger Joint...
► Powerful Wooden Mallet with Aluminum Weight // 알루미늄을 결합한 목공망치
• Powerful Wooden Mallet...
► Laser Guide to Drill Press // 탁상 드릴프레스 레이저 가이드
• Laser Guide to Drill P...
► Pot Lid Rack Holder // 냄비, 후라이팬 뚜껑 걸이
• Useful Pot Lid Rack Ho...
► Ultimate Miter & Right Angle Jig for Crosscut Sled // 썰매지그용 삼각형 & 직각 지그
• Ultimate Miter & Right...
► Quick Release Wooden Vice // 퀵 릴리즈 기능을 가진 우드바이스
• Quick Release Wooden V...
► Resizable Large Dowels Maker with a Router // 다양한 사이즈가 가능한 대형 원주목(목봉) 지그
• "Resizable" Large Dowe...
► Tenon Jig for the crosscut sled // 썰매지그용 장부 지그
• Tenon Jig for the cros...
► Long Tapering Jig for the crosscut sled // 썰매지그용 책상다리 지그
• Long Tapering Jig for ...
► 4-Way Blast Gate for dust collector using 3D printing // 3D 프린터를 이용하여 4방향 집진 분배기
• 4-Way Blast Gate for d...
► Extreme Crosscut Sled with dust collector & flip stop block // 다양한 기능이 추가된 테이블쏘 설매지그
• Extreme Crosscut Sled ...
► Workbench with built in Table saw, Router and Jigsaw // 다양한 기능(트리머, 직쏘)을 갖춘 테이블쏘 작업다이
• Workbench with built i... - แนวปฏิบัติและการใช้ชีวิต
![[LIVE] : ONE ลุมพินี 67 วันนี้!! คู่เอก "นักรบ vs ทาเกียร์"](http://i.ytimg.com/vi/eahGc1XmrEU/mqdefault.jpg)
아이디어가대단하시군요
조각하시는분들이보고유용하게 따라사용하시겠네요.
관심 가져주셔서 감사드립니다. 👍
구독과 좋아요도 부탁드릴께요 ^^
다른 제품리뷰, DIY 영상도 많이 있으니 한번 구경오세요~~
요즘들어 댓글이 스펨으로 자동 분류되어 삭제되는 현상이 자주 발생되고 있습니다. 제가 지우는 것은 절대 아니니 오해 없으시길 부탁드립니다. 혹시 댓글을 1분안에 바로 삭제되면 제 메일(treean.wood@gmail.com)로 도면 요청해 주시면 시간나는데로 꼭 보내드리겠습니다. 감사합니다.
congratulations! excellent job, very professional , thanks for sharing
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
멋지네요~~~
감사합니다. ^^
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted.
요즘 댓글에 "메일주소"가 들어가면 댓글이 스펨으로 자동 분류되어 댓글이 자동으로 삭제됩니다.
If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it.
자동삭제되면 제가 볼수가 없어서 요청하신 도면발송이 불가능해집니다.
If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com".
도면 수신을 원하시는 분은 메일(treean.wood@gmail.com)로 도면 요청해 주시고
Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time.
댓글에 "도면 요청을 메일로 보냈습니다." 이라고만 적어 주시면 확인후 시간나는데로 꼭 보내드리겠습니다.
Thank you.
감사합니다.
Thanks for the drawings.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
It is the best lift I have seen yet . Super .
If you leave your email address, i will send you the drawing file.
Thanks for your interest.👍
Love it.....Just made this in my shop but i put in a tactile switch on the pulse wire and an external pot to adjust the frekvense......
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
Perfect,super...bravo bravo
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
amazing fella i really like this lift by far best i have seen
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
exactly what I wanted to build, thanks for the video!
The requested drawing has been sent.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
So smart device for a table router, it's an amazing video thanks for sharing
Very good job
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Muchas gracias
What a great solution you have made for a router lift, great ... I would like to receive the building instructions from you .... thank you very much ...
Thanks for your interest.👍
Please provide your email address and we will send you the drawing.
Tree-An Wood, my email adress is: ceesenrina@hetnet.nl
The requested drawing has been sent.
Thanks for the instructions, super!
감사합니다
다른 영상 보고 레이저 포인터 만들어 보려고 모듈 신청했습니다
조만간에 레이저 포인터 업그레이드 버젼 준비하고 있습니다.
감사합니다. ~
Hello! Really nice job on the video & the router lift project! I’d love to have the plans!
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted.
If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it.
If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com".
Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time.
Thank you.
Ultra fantastico....stupendo è a dir poco....e per me sei il numero 1, ti scrivo la mia e-mail così quando puoi mi manderai i disegni per falò anch’io....un saluto da Rimini 👍😉bravissimo💪
Luar biasa pekerjaannya rapi
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Saya suka cara kerja anda yg muda
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Awesome! Can you add an automatic stop to a certain measurement? For example, when the bit is raised and touches (ground out) metal height gauge, the stepper motor will stop automatically
I am thinking about using the Enable pin or Sleep pin in the circuit.
It seems possible, but it is a little difficult to give a definite answer because I haven't tried it correctly.
Thanks for your interest.👍
리프트장치 퀄리티가 전문가급으로 잘 만드신거 같습니다! 스텝모터 및 스위치 그리고 결선하는 전선은 어떤걸 써야하는지 문의드립니다!
안녕하세요.
설명란에 부품에 대한 구입처를 자세히 적어놓았습니다.
감사합니다.
Thanks a lot for drawings. Unfortunately I can not put hundred fingers UP. I'll start to work on this project. Thank you again.
Thank you for your excessive compliment. :)
Could you show how you connected the bread board. I see the schematic but am very new to electronics so I do not know how the wiring of the bread board should be. Thank you very much for the plans.
Your work is excellent
I'm sorry. There is no separate video of the breadboard connection.
However, the following video may help.
th-cam.com/video/lk5Ug--bIVI/w-d-xo.html
Thank you.
난이도가 높은데요 잘보고 갑니다
요즘 댓글에 "메일주소"가 들어가면 댓글이 스펨으로 자동 분류되어 댓글이 자동으로 삭제됩니다.
자동삭제되면 제가 볼수가 없어서 요청하신 도면발송이 불가능해집니다.
도면 수신을 원하시는 분은 메일(treean.wood@gmail.com)로 도면 요청해 주시고
댓글에 "도면 요청을 메일로 보냈습니다." 이라고만 적어 주시면 확인후 시간나는데로 꼭 보내드리겠습니다.
감사합니다.
very good video thank you for share..
The requested drawing has been sent.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
If you add resistor to get slower adjustments and install electronic readout display then it will be great machine. Good job!!!
트리 언 우드님이 한국분이라는것에 자랑스럽고 굉장히 기분 좋은 일입니다.
좋은정보 감사합니다.다만 영상이 좀 길더라도, 초보들을 위해 해석,주의할점등을 영상에서 설명하는 동영상으로도 제작 해주시면 어떨까 생각해봅니다.
우드님이야 몸에 베셔서 뚝딱뚝딱 만드시지만 익숙하지 못한분들은 난해함에
지레 겁먹고,시도조차 못할수도 있을것
같아요.외국 유튜버들은 이런 목공 제작 영상이 엄청 많고,한국은 적은편 입니다.작은 국력 키우기 위해 도움을 주십사 권해봅니다.
구독 좋아요는❤ 당연히 했 습니다^^
작은 국력을 키울수 있도록
Very nice idea, would need a little refining to be useful, it needs fine adjustment to get exact height, have you figured this out yet?
Thanks for your interest.👍
If you reduce the lead of the T8 Lead Screw to 4mm, 2mm, or 1mm instead of 8mm,
You can adjust it more precisely. (The smaller the lead, the finer the movement, but the up and down movement is slower.)
thank you.
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.
And the explanations on how to do the connections. Thanks!
Drawing_3.png of the mail attachments sent to you is the wiring diagram. Thank you.
muchas y muy agradecido por lo planos y la rapidez, te doy mi enhorabuena por tu proyecto, quiera saber si te puedo hacer una consulta, en el sistema electronico, puedo cambiar todo los circuito para controlar el motor por
If you have any questions, i will answer your questions.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
Quiero darle las gracias por los planos que me ha pasado.
Le saluda cordialmente
Felipe
Aficionado al bricolaje de carpintería
The requested drawing has been sent.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.
some type of variable frequency drive that can speed or slow the pulses would be an awesome addition so you can have fast movement when swapping bits but fine control when trying to dial in an exact depth.
Thank you for good information.
The pulse rate can be adjusted by adjusting the variable resistor on the NE555.
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.
@@TreeAnWood
Hi, I'd like to request the plans for the auto router lift please. Also do you have instructions available for the electronics part of this build.
Thanks
Rich
Hi,
really interesting, I would be happy to receive the plans. Tks
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.
1:27 @@TreeAnWoodHi, great video. Could you send me the plans . Thank you
Best idea
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
Already bought item to install. Tqvm
@@TreeAnWood Already bought item to install and follow your video. My email gurusekolah.penyayang@gmail.com if you can send me details. Tqvm
The requested drawing has been sent.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
@@TreeAnWood tqvm. I have recieved from your email. Tqvm
Awesome. I would like Drawings, please.
잘오르긴 하지만 ~
작업에 열중하는
모습이 멋지네요 ...
관심 가져주셔서 감사드립니다. 👍
다른 제품리뷰, DIY 영상도 많이 있으니 한번 구경오세요~~
I need some advice. the motor you used, Stepper Motor (17HS3430), has the power to move the Bosch POV 1200 AE. the motor must have the power to contract the springs of the cutter. thanks
It is difficult to tell you exactly because I have not used the Bosch POV 1200 AE,
When selecting a stepping motor, you must carefully consider the weight and spring tension of the Bosch POV 1200 AE.
I think you can remove the spring.
Because the main body is supported by the stepping motor anyway.
For reference, the holding torque of the 17HS3430 motor is 28N.cm.
Thank you.
So much for ever getting that stepper motor out if it goes bad.
I'd love to have the plan for this router lift please. Thanks.
Gute Konstruktionen Punkt könnte ich wohl die Maße und ein Plan gekommen Danke
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted.
If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it.
If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com".
Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time.
Thank you.
Hello wondering if you have a design for a 100mm motor diameter and also with 12mm rods rather than 8mm. Thanks!
ive noticed someone has the same problem as me. Could you do an update on how to do the wiring. The diagram is really difficult to follow if your no electric expert. I have purchased all the items and await delivery. So please Please can you provide an update so I can build this machine. Great video though. I have also done a screen shot of the png and the dimensions for the cogs are missing the thickness measurement. Im assuming this will effect the runnig of the machine when it is running if i get it wrong.
Would you now choose to use 1mm lead screw instead of 2mm ??? Stepper motor seems to move router too fast i think ?? One needs to beable to control 0.5mm increment or less when you trimming a slot as example
Thanks for your interest.👍
If you reduce the lead of the T8 Lead Screw to 4mm, 2mm, or 1mm instead of 8mm,
You can adjust it more precisely. (The smaller the lead, the finer the movement, but the up and down movement is slower.)
thank you.
새해복 많이 받으세요!!
지난 번에 보내주신 메일 잘 받았습니다.
아직 여건이 허락 되질 않아 제작은 하질 못하고 있습니다.
궁금한점이 있어 질문드립니다.
트리머를 스위치로 상/하 이동하는 것은 이해가 되었습니다.
정밀 이동은 어떻게 해야 되는지 궁금합니다.
(예 : 바닥? 에서 10mm 세팅)
감사합니다.
새해복 많이 받으세요..
T8 Lead Screw의 lead를 8mm가 아닌 4mm나 2mm, 1mm로 줄려서 사용하시면
좀더 정밀하게 조절하실수 있습니다. (lead가 작을수로 세밀하게 움직히지만, 위아래 움직임이 느려집니다.)
저는 Depth Gauge로 측정해서 높이를 조절합니다.
이 링크를 한번 참조해 보세요.
www.aliexpress.com/item/32964697244.html
감사합니다.
@@TreeAnWood 네... 답변 감사합니다.
Hello, I’ve sent you an email requesting diagram/plans. Also what voltage for the 100uF capacitor? 10v? Much thanks!
gran bel progetto anch'io ho un rifilatore delle stesse misure di quello nel video ,e da tempo che mi piacerebbe trasformarlo in un piccolo banco fresa, ma non ho mai trovato un progetto che mi piacesse e sopratutto facile da fare,il tuo è veramente bello,e il video spiega bene come costruirlo,è mica possibile avere un pdf del disegno? grazie per aver inserito anche i link per poter acquistare il materiale di nuovo complimenti al prossimo video
Good morning, great design, very well designed, I just couldn't see the engine specification.
I would like to have this project, if you can do this favor, then I draw in Auto Cad 2018 3D
Congratulations on your work.
If you leave your email address, i will send you the drawing file.
Thanks for your interest.👍
Muy buenas me gustaría recibir las medidas por correo. Disfruto viendo tu gran trabajo gracias
If you leave your email address, i will send you the drawing file.
Thanks for your interest.👍
Bonjour bravo pour la table de défonceuse c'est super sur quel site avez vous achetez le moteur et le kit circuit imprimé et inter pour le levage et descente de la fraiseuse à très bientôt Bernard 👍👍
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
I used "DCA Router Trimmer AMP02-6 "
Please refer to the following youtube video.
th-cam.com/video/h1er_lmya2U/w-d-xo.html
The circuit was implemented on the breadboard according to the circuit diagram I made.
www.aliexpress.com/item/32956621461.html?spm=a2g0o.productlist.0.0.41227117X0A6Yg&s=p&ad_pvid=202007301012231599709944301140003780007_5&algo_pvid=c0945bb2-9c30-4ccf-92a4-797dd8ad1f73&algo_expid=c0945bb2-9c30-4ccf-92a4-797dd8ad1f73-4&btsid=0be3764315961291438052307ebdd0&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
Please check the linked site.
www.aliexpress.com/item/4001022374193.html?spm=a2g0s.8937460.0.0.2f732e0eI2wTYw
thank you very much for this helpfull video. will you please send the png drawing to:gunaykucuk@gmail.com
Very nice job! I'm looking for long time how to make that and found your solution is the best! I would like to get the png drawings when you get a chance. Thank you.
If you leave your email address, i will send you the drawing file.
Thanks for your interest.👍
❤❤
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
I meed router drawing as well
I sent you a drawing request by email. Thank you Rick Hammans
The requested drawing has been sent.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
Great job! I'm been looking for long time how to make that and found your solution is the best! I would like to get the png drawings when you get a chance. Thank you
Leave your email address in the comments and i will send you the drawing file. (You must leave your email address in the comments so that I can see it in the notification even if it is deleted.)
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
The electrical diagram indicates an Output Voltage power supply: 12V DC but does not mention Output Current:! Amp.
Please can you give me this information.
I used a 12V, 4A adapter power.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
Nice video of your auto router lift. I would appreciate receiving a copy of your png drawings. Thanks again for your video.
If you leave your email address, i will send you the drawing file.
Thanks for your interest.👍
@@TreeAnWood Thank you, my e-mail is: lloydsch47@yahoo.com
Just what I'm looking for. Can I get a copy of the plans emailed?
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted.
If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it.
If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com".
Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time.
Thank you.
Top D+...
I’d like the png drawings this looks great!
Sinned.ink@gmail.com
The requested drawing has been sent.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
The requested drawing has been sent.
Thanks for your interest.👍
Hi, very nice job; I'm interested; can you please let me have the plans? Many thanks
A
The wood parts are no problem but would really like to know where you purchased the glide blocks:
I don't quite understand what glide blocks are talking about?
Please explain in detail.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
@@TreeAnWood Can you tell me where I can purchase the metal parts? also I would like the drawings if you would be so kind to send them...
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
I used "DCA Router Trimmer AMP02-6 "
Please refer to the following youtube video.
th-cam.com/video/h1er_lmya2U/w-d-xo.html
The circuit was implemented on the breadboard according to the circuit diagram I made.
www.aliexpress.com/item/32956621461.html?spm=a2g0o.productlist.0.0.41227117X0A6Yg&s=p&ad_pvid=202007301012231599709944301140003780007_5&algo_pvid=c0945bb2-9c30-4ccf-92a4-797dd8ad1f73&algo_expid=c0945bb2-9c30-4ccf-92a4-797dd8ad1f73-4&btsid=0be3764315961291438052307ebdd0&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
Please check the linked site.
www.aliexpress.com/item/4001022374193.html?spm=a2g0s.8937460.0.0.2f732e0eI2wTYw
The order site is detailed in the description field.
Looks great. I would like to get the png drawings. Thank you
The requested drawing has been sent.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
Hola amigos, pueden tomar un video de los pasos para hacer un motor, muchas gracias.
The requested drawing has been sent.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
I would really like a set of plans but don't want my email address out for the world to see. What other option do you -have available?
Thanks for your interest.👍
Email "treean.wood@gmail.com" and i will send you the plan.
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
I am very impressed. I’d love to make this. Please send me plans.
Thank you
LabrysStoryteller:
Aqlabby@yahoo.com
The requested drawing has been sent.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Bonjour ou Bonsoir,
Je suis jeunes retraités 😁 et depuis un bout de temps maintenant j'adore travailler le bois mais à côté de vous je ne suis qu'un débutant .j'ai commander et reçu en partie les pièces pour cette réalisation et j'aurais voulu svp savoir si on pouvait brancher sur du 220v . vous serait il possible de me faire parvenir les plans du câblages pour du 220v .Je vous en remercie par avance. Je regarde vos vidéos déjà depuis un bout de temps et je les trouves super franchement champion bon courage à vous. Et continuez comme cela !!!!
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted.
If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it.
If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com".
Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time.
Thank you.
The requested drawing has been sent.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
would you plase send me a copy of the drawing, I would like to make a router lift similar to yours...thank you
朋友你好，能不能拍個製作電機的步驟視頻，非常感謝。
The requested drawing has been sent.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Автоматический подъёмник роутера
The requested drawing has been sent.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.
Hi,
Yes, I would be happy to receive the plans. For the electronic system, I would like to have more details, especially in the assembly of the different cards. What is the minimum possible ascent speed for a precise adjustment of the cutter? Are there limit stops at both ends.
Thank you and good to you
If you leave your email address, i will send you the drawing file.
Thanks for your interest.👍
Very nice video. It will really help me to make the same mechanism if you don't mind to send me the detail drawing. Thanks
If you leave your email address, i will send you the drawing file.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.
Smart idea.I'd.like to get the png drawings.Thank you
If you leave your email address, i will send you the drawing file.
Thanks for your interest.👍
Nice solution. please send png drawing
The requested drawing has been sent.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
좋은 자료 감사합니다. 근데 라이너를 살짝 넣기 위하여 구멍을 넓힌 후에 라이너를 고정시키는 부품의 명칭이 무엇인가요?^
그리고 리프트 하는 샤프트를 모터에 연결하는 부품은 이름이 어떻게 되는지 가르쳐 주세요^^
영상의 몇분쯤에 나오는 부품을 말씀하는지요?
@@TreeAnWood 3:53경요
메이드올 에서 왠만한 부품은 거의다 있습니다
SHF08 샤프트 지지대 - m.smartstore.naver.com/madeall/products/2995408001?NaPm=ct%3Dkgzoyae3%7Cci%3Dcheckout%7Ctr%3Dppc%7Ctrx%3D%7Chk%3D97bd989bb34d440184114417d1bde7ae374a1f7d
5X8mm 모터 커플링 스프링 커플러 - m.smartstore.naver.com/madeall/products/2480181342?NaPm=ct%3Dkgzowyw1%7Cci%3Dcheckout%7Ctr%3Dppc%7Ctrx%3D%7Chk%3D21b5a3b01f2cfce1e8d52aa5b3299b8f049300d6
@@TreeAnWood 감사합니다. 제가 부품에 대해 잘 몰라서 많이 묻게 됩니다^^
Hi i see the draws, ty so much, u think will be possible make a video with the complet electric connection? Will be awesome ty so much :) Have a great day.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
In più le volevo chiedere se lei tiene il motorino completo cioè assemblato e funzionante quando costa e se lei lo vende fatemi sapere grazie
Sorry.
Even with a translator, I can't figure out what it's about.
Please speak again in English.
thank you.
Bonjour,
Beau travail.
Serait-il possible d’avoir les plans de la menuiserie et de l’électronique ?
Merci
A+++
If you leave your email address, i will send you the drawing file.
Thanks for your interest.👍
@@TreeAnWood
yves38@gmail.com
Thanks
The requested drawing has been sent.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
@@TreeAnWood
Many thanks :)
Can I get the drawing for the router lift.
Be great to have prints to build this.
The requested drawing has been sent.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.
우아~~~최고네요!!!
저도 만들어 보고 싶어요.도면 좀 부탁해도
될까요.....???
관심 가져주셔서 감사드립니다. 👍
이메일 주소를 알려주시면 도면을 보내드리겠습니다.
요즘들어 댓글에 메일주소가 들어가면 스펨으로 자동 분류되어 삭제되는 현상이 자주 발생되고 있습니다. 제가 지우는 것은 절대 아니니 오해 없으시길 부탁드립니다. 혹시 댓글을 1분안에 바로 삭제되면 제 메일(treean.wood@gmail.com)로 도면 요청해 주시면 시간나는데로 꼭 보내드리겠습니다.
구독과 좋아요도 부탁드릴께요 ^^
다른 제품리뷰, DIY 영상도 많이 있으니 한번 구경오세요~~
감사합니다.
그렇군요.
E-mail 주소를
보냈는데 삭제가 되었어요.
Buongiorno volevo sapere il motorino deve essere comprato completo di scheda
Leave your just email address in the comments and i will send you the drawing file. (You must leave "just" your email address in the comments so that I can see it in the notification even if it is deleted.)
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
I want this very much. You know, thousands more people (novices) could achieve this if you had a video how you hooked everything up on the breadboard. I went and watch breadboard videos, yet how they apply to this is what is needed. You could save us hundreds of hours of research and just show us. It's kinda like giving us all ingredients to a recipe and not showing how to make it. PLEASE. You said you'd reward us with better videos ; ))
If you leave your email address, i will send you the drawing file.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.
the following video may help.
th-cam.com/video/lk5Ug--bIVI/w-d-xo.html
Thank you.
@@TreeAnWood Thanks, it tells what a breadbox does, but now how you set it up with all those components. : (
Hi , I love this project. I have everything and I have problems with the diagram , you didn’t have a how to d it video?. I have put everything together but for some reason is not working. Can you help me please
Hello friend, I sent you an email, asking if your circuit will hold a nema 23 which is what I have, since my router weighs two kilos plus the structure about three kilos
Hi.
I will answer your questions.
The rated current of 23HS7628 are going to use is 2.8A.
The control capability of the step motor drive A4988 is up to 2A.
So, it seems to be a problem if you use it as a driver for A4988.
You should find a driver for the 23HS7628.
For reference, the A4988 specifications are in the link below.
www.aliexpress.com/item/32965199683.html
==> "output drive capacity of up to 35 V and 2 A."
Thank you.
Пришлите пожалуйста размеры деталей и схему автоматики. Заранее большое спасибо и конечно я восхищён вашим изделием. Огромное спасибо за ссылки на приобретение деталей
If you leave your email address, i will send you the drawing file.
Thanks for your interest.👍
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.
My parts arrived. Do you have any tips on wiring the parts? Thanks.
Congratulations. ^^
I'm sorry, but what exactly are you asking?
You can connect it like the wiring diagram we sent you.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
@@TreeAnWood Hi, yes, I have the diagram you sent. OK, I'm not an electrical type person.. I'm looking for hints on connecting the wires to the terminals on the parts placed on the breadboard.
are they soldered or? What are the squiggly lines between STEP and ground and DIR and ground with the letters 47k>? Or do I need to find a person who has experience with this kind of work? Thanks,
Squiggly lines with the letters 47k are resistors.
➤ www.aliexpress.com/item/32847096736.html
Using a breadboard does not require soldering.
Five compartments of the breadboard are connected to each other.
It will be helpful to refer to the following video for detailed instructions.
➤th-cam.com/video/lk5Ug--bIVI/w-d-xo.html&ab_channel=ArrowElectronics
If you study a little, I believe you will be able to do it alone.
Thank you.
Have a nice day~ :)
can you send me how conect step motor and control card?,thank you
The requested drawing has been sent.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
I would like the PNG drawings, please.
If you leave your email address, i will send you the drawing file.
Thanks for your interest.👍
Dear sir will you be do kind to send me your plan about te auto router lift and if possible a list of parts. Thank you very much
My emailadress is
andrieshoen@ gmail.com
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
The requested drawing has been sent.
need upgrade , insert lcd , z probe , step increment button, and in finish cnc router
Thanks for the good advice.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.
Buonas3ra per favore mi può mandare lo schema elettrico del montaggio completo per favore grazie
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted.
If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it.
If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com".
Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time.
Thank you.
Hallo finde das Teil toll. Suche schon länger was. Kann den Link zu der Webseite nicht finden.
These days, if "e-mail address" is included in a comment, the comment is automatically classified as spam and the comment is automatically deleted.
If it is automatically deleted, it will be impossible to send the requested drawing because I cannot see it.
If you would like to receive drawings, please request drawings by e-mail "treean.wood@gmail.com".
Then, just write down in the comments, "I sent you a drawing request by e-mail," and I will check it and send it to you as soon as I have time.
Thank you.
안녕하세요
바쁘신데 죄송합니다
제품을 구입 할려고 하니 다른건 이해가 되는데
2가지가 이해가 안됩니다
첫째 스테프 모터에 1pcs. 3pcs. 5pcs가 있는데 어느것을 선택해야 하나요
두번째 초소형 미니 dc-dc 스탭드롭다운 정원공급장치에도 1pcs. 5pcs.10pcs가
있는데 어느것을 구입해야 하나요 죄송하지만 알려주세요
미안하고 감사합니다
질문주신 내용은 단지 수량을 의미합니다.
여분 부품이 필요하지 않으시다면 1pcs를 선택하시면 됩니다.
혹시 영상이 도움이 되셨다면 구독과 공유 좀 많이 부탁드립니다. ^^
감사합니다
Gostei da ideia se me podesse ceder os desenhos agradecia,um abraço.
where is the link to the power supply.
Boa noite, sou do Brasil e gostei da pra fornecer o diagrama ?¿¿
If you leave your email address, i will send you the drawing file.
Thanks for your interest.👍
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically classified as spam and deleted frequently. I'm never going to delete it, so please don't get me wrong. If a comment is deleted immediately within 1 minute, please send a request for a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as I have time. thank you.
Why a stepper motor instead of a simple DC gearmotor?
Thanks for your interest.👍
It is possible to implement using a DC motor, but I know that the torque of a small size motor is larger and more precise control is possible with a stepper motor.
Leave your just email address in the comments and i will send you the drawing file. (You must leave "just" your email address in the comments so that I can see it in the notification even if it is deleted.)
I hope it will be helpful to those who watch this video even a little.
I will try to reward you with better videos.
Hope you enjoyed this video and if you like it, please share, subscribe, like ~~~
There are many other videos, so if you are interested, please watch.
These days, comments are automatically flagged as spam and are often deleted. I will never delete it, so please do not make a mistake. If a comment is deleted within 1 minute, just write your e-mail address in the comment or request a drawing to my e-mail (treean.wood@gmail.com) and I will send it to you as soon as time permits. Thank you.
도면 요청을 메일로 보냈습니다
요청하신 파일을 보내드렸습니다.
관심 가져주셔서 감사드립니다. 👍
이 영상을 보시는 분들께 조금이나마 도움이 되었으면 합니다.
이 영상이 마음에 드셨으면 구독과 좋아요도 부탁드릴께요 ^^
이 외에도 많은 영상이 있으니 관심 있는 분들은 한번 구경오세요 ^^
요즘들어 댓글에 메일주소가 들어가면 스펨으로 자동 분류되어
삭제되는 현상이 자주 발생되고 있습니다.
제가 지우는 것은 절대 아니니 오해 없으시길 부탁드립니다.
혹시 댓글을 1분안에 바로 삭제되면 제 메일(treean.wood@gmail.com)로
도면 요청해 주시면 시간나는데로 꼭 보내드리겠습니다. 감사합니다.
안녕하세요
관심 가져주셔서 감사드립니다. ^^
도면과 회로도 지금 보내드렸습니다.
좋은 하루 보내세요~~~
and a question .... Could it be done with 18mm mdf?
It's possible, but I don't recommend it because later MDF is weak against moisture and can be transformed later...
well ... I'll do it like in the video thank you very much
Thank you :)
트리머 작업대 구매 가능합니까?
사고싶어요 ㅡ
제작해볼려고 했는데 부품구하기도 힘들고요