My 2023 Ram 1500 Longhorn looks have ambient light at dash but I don't see on at ignition swith or AC vent. Is this means, I can only install one light at dish??
@@Martrydom749 the fuse for the accessory power is #54, there are 2 positions 54A and 54B just move the fuse from 54A into the 54B slot to switch to accessory power.
Yes, most Rebels have the factory ambient lighting from the factory but just be sure you have the lights there, if you do this will install on your Rebel.
@@djdnl you need something there that will diffuse the light or it will just shoot out. We are looking into an option for the other Rams now. Stay tuned.
Do you have a part number for the mounting clips? The parts you modified to fit the LED’s on. I have a 2022 Laramie with no ambient dash lights but I read that the clips are still behind the dash. But I didn’t see it when i popped the AC vent cover off to check.
What clear pipe? Like where the light shines through? There are gaps in the trim where the light would shine through so it looks like if I can just get the mounting clips I should be good
@@ORACLElights I have the same truck and the clear pipe is not there. I believe that Ram did away with it for 2021 and 22 Laramies. I would love to get the part number for the clear pipe as well as the other parts needed to make this happen in my truck. Thank youi.
@@ORACLElights i think it can be done . Here in belgium the trx comes with a switch exhaust that opens in sport en baja mode en closed in normal mode . So it should be somewhat possible
Its not an issue with the board, its that you are going from a 2 wire setup to a 4 wire setup (RGB) so there needs to be consideration for cable routing.
Now there needs to be a kit for all of the doors and i would buy it
My 2021 rebel doesn’t have any light coming out of those parts. Is there still all the parts there or will this kit not work with rebels.
I take it the same instructions are basically the same for a dodge rebel?
Correct.
When will the full package be released???
My 2023 Ram 1500 Longhorn looks have ambient light at dash but I don't see on at ignition swith or AC vent. Is this means, I can only install one light at dish??
So the factory wiring harnesses just dangle back there unused now? I figure you'd at least want to zip them to the Oracle cables or something... ?
Does this fit the bighorn
I'm definitely ordering a set. I'm just concerned about the constant power. Anyway to hook these up so that they are only on when the car is ?
Yes, you will see we cover that in the video, you change the fuse position to switch between constant and ignition power.
@@ORACLElights fuse placement?
@@ORACLElights Just placed my order. Can you elaborate on how to switch the fuse position?
@@Martrydom749 the fuse for the accessory power is #54, there are 2 positions 54A and 54B just move the fuse from 54A into the 54B slot to switch to accessory power.
@@ORACLElights Can you point me the time in the video where this was covered?
Wish I could do this to my 2020 Power Wagon, it gets pretty dark in there.
Will the APP work on a Android tablet?
Hello, yes works on Android as well.
can you do one for the rebel
Yes, most Rebels have the factory ambient lighting from the factory but just be sure you have the lights there, if you do this will install on your Rebel.
Is this good for a 2020 ram laramie? Looks to be a have the same light placement above push start and dash storage box
Yes, if you have the factory lights this will work with your truck.
My 5th gen ram sport doesn't have a lightkit, can I still install this system and order those light "pipes"?
Need to have the light pipes in place in order to add these parts.
@@ORACLElights that s*cks, than we go with thin 12v ledstrips. Thanks for your reply
@@djdnl you need something there that will diffuse the light or it will just shoot out. We are looking into an option for the other Rams now. Stay tuned.
Do you have a part number for the mounting clips? The parts you modified to fit the LED’s on. I have a 2022 Laramie with no ambient dash lights but I read that the clips are still behind the dash. But I didn’t see it when i popped the AC vent cover off to check.
We will see if we can get the part#s for you, would be a great feature to add!
That’d be awesome! Yeah I ordered the lights from your website and went to install them and realized I don’t have the clips in my truck.
@@adammmish but the clear pipe is there?
What clear pipe? Like where the light shines through? There are gaps in the trim where the light would shine through so it looks like if I can just get the mounting clips I should be good
@@ORACLElights I have the same truck and the clear pipe is not there. I believe that Ram did away with it for 2021 and 22 Laramies. I would love to get the part number for the clear pipe as well as the other parts needed to make this happen in my truck. Thank youi.
Do you them for the doorpanels as well ??
Yes, the full kit is ORACLE Part# 4235-333, will be out in March.
@@ORACLElights thanks fot the fast reply.
Looking foward to it
@@ORACLElights i would be cool if it could be controled depending what mode the trx is in
@@vwdutch agreed, the factory system is locked unfortunately so we can't tap into those inputs.
@@ORACLElights i think it can be done .
Here in belgium the trx comes with a switch exhaust that opens in sport en baja mode en closed in normal mode .
So it should be somewhat possible
😍😍🥳🥳
Y’all want us to trim all the housings by shaving and snipping clips instead of redesigning your chips to fit, no thanks, skip.
Its not an issue with the board, its that you are going from a 2 wire setup to a 4 wire setup (RGB) so there needs to be consideration for cable routing.