Que adaptação excelente do thc... Infelizmente ($$$), vou utilizar o cabeçote manual da minha fiberlaser para montar uma mesa cnc... se puder passar como fez com o thc. Já havia imaginado usar um sensor capacitivo, e tentar liga-lo ao thc. É possível graças ao seu video... Só não sei como fazer.
@@TAMARbarCNC Wow, how is this possible, most THCs use arc voltage to maintain a consistent distance from the plate while the torch is cutting but you were demonstrating it without cutting, nor does a fiber laser have a arc. Awesome machine that you have built btw!
My THC uses arc voltage as well. I've managed to connect the fiber laser head capacitance sensor to the thc. So the sensor sending voltage to the thc, and the thc thinks it's arc but it not haha.
También es posible usar sistemas híbridos paso-paso con encoder, tienen a funcionar muy suaves a la vez veloces, solo debes dimensionar segun sus necesidades...
@@TAMARbarCNC thank you for the answer. But after looking at the manual and youtube video of controller that the fscut3000s will only cut tube and not sheet. Is that correct?
@@chrisfischer511 Eso es correcto, los sistemas FScut tienden a ser costosos, existe la opción de trabajar con Raytools uno para lamina y otro para tubería individualmente pero el costo de ambos todavía no alcanza lo que sale un solo modulo de cypcut 😅
I'm using centroid acorn 4 axis plasma controller. It's a plasma controller kit from centroid that includes THC, and I've made it compatible with fiber laser.
Hi my friend, I make my own fiber laser 1K, but my controller only use 3 axis, could you told me wath controller you use, the model, I wanna replace my raycus for this, I realy need the 4th axis, thanks
What light source and lense are you using?? Do you have any build videos
Raycus 2kw laser source
Здравствуйте...интересное у Вас Видео
You certainly have the cutting sequence worked out. 😎
Que adaptação excelente do thc...
Infelizmente ($$$), vou utilizar o cabeçote manual da minha fiberlaser para montar uma mesa cnc... se puder passar como fez com o thc. Já havia imaginado usar um sensor capacitivo, e tentar liga-lo ao thc. É possível graças ao seu video... Só não sei como fazer.
Focusing looks very smooth, what type of autofocus system does your laser have?
It's not auto focus.
Auto focus in fiber laser is something else entirely.
What I'm demonstrating in the beginning of the video is THC
@@TAMARbarCNC Wow, how is this possible, most THCs use arc voltage to maintain a consistent distance from the plate while the torch is cutting but you were demonstrating it without cutting, nor does a fiber laser have a arc. Awesome machine that you have built btw!
My THC uses arc voltage as well.
I've managed to connect the fiber laser head capacitance sensor to the thc.
So the sensor sending voltage to the thc, and the thc thinks it's arc but it not haha.
@@TAMARbarCNC Great idea! Looks like magic tho
Hello, good video, what parameters and gas do you use?
wow, very well done!
Nice, are you using servo motor
Yes
También es posible usar sistemas híbridos paso-paso con encoder, tienen a funcionar muy suaves a la vez veloces, solo debes dimensionar segun sus necesidades...
hi, nice video , do you use a air or another gas? thank you
I use oxygen
What is the original plasma table model brand ?.. or is it diy?
If you were to build another sheet and tube 4axis fiber from scratch today what control would you use?
Fscut3000s
@@TAMARbarCNC thank you for the answer. But after looking at the manual and youtube video of controller that the fscut3000s will only cut tube and not sheet. Is that correct?
@@chrisfischer511 Eso es correcto, los sistemas FScut tienden a ser costosos, existe la opción de trabajar con Raytools uno para lamina y otro para tubería individualmente pero el costo de ambos todavía no alcanza lo que sale un solo modulo de cypcut 😅
Hi! what is THC model?
I'm using centroid acorn 4 axis plasma controller.
It's a plasma controller kit from centroid that includes THC, and I've made it compatible with fiber laser.
@@TAMARbarCNC Thancs!
היי, נראה מדהים, גם אני בניתי פלאזמה ורוצה להפוך אותה ללייזר, יש מצב להתייעץ אתך?
מוזמן אחי 0525686316 תמר בר
What software do you use that writes the code for doing that pipe on that 4th axis ?
Sheetcam rotary plasma plug in
fabuloso. nice work.
Are you using closed loop stepper dude
Currently yes, besides the rotary axis with is servo.
I plan to replace all the close loop to servo.
Why in closed loop finishing not good dude?
@kalyanasundaram1583 they are not fast enough and and the acceleration is not fast enough.
What frequency you use to cut in raycus dude
What is pulse repetition rate and pulse width you set in raycus source software in hardware emissions control
Hi my friend, I make my own fiber laser 1K, but my controller only use 3 axis, could you told me wath controller you use, the model, I wanna replace my raycus for this, I realy need the 4th axis, thanks
You want to cut sheets and tube also?
@@TAMARbarCNC Yes, for the moment only I cut sheets, but my controller don't have the 4th axis.
@renyk if you want to cut tubes square tubes I recommend that you'll use fscut3000s
@@TAMARbarCNC Tanks my friend, let me check about this controller.
Голова ВТ240S