G37 SHORTENED/TILTED SPINDLES (BIG FRONT CAMBER)

[@xxaestevezxxi2767]

this channel is gonna blow up brother!!

[@OCTANEANDZIPTIES]

Means a lot, just trying to be different than everyone else while doing what we love🙏🏼

[@stayslept6410]

I am buying shortened spindles for my 350z just wondering how hard of an install this is seems like a bit of a pain to do may just have a shop install them

[@OCTANEANDZIPTIES]

No, the instal of spindles is actually easy. HMU on IG @ Logan_lamb11 and I’ll help you out no prob

[@matthewab823]

How does it ride

[@RuggedWerx]

How many degrees of tilt did you do? Also wondering which way you tilted it? About to do my own set, so curious

[@staincouture7704]

I’m having the issue of my truheart upper control arms hitting the strut tower when I hit a bump on my 370z. Do you think stiffer spring rates would fix this or am I gona have to do this to my spindles?🥺 i

[@OCTANEANDZIPTIES]

Stiffer spring rates yes would help, but you’d have to go stiffer by a considerable amount. What I would recommend and SMARTEST decision to keep ride quality would be to shorten your spindles, I’d recommend 30mm. At that point you won’t be hitting the body with your FUCA and could even go lower if you wanted. Hope this help, if you have any other question lmk, or DM Logan_lamb11 on IG

[@staincouture7704]

Octane and Zip ties thanks brotha! I think that’s what ima end up doin🙏🏼

[@notlowcord5325]

are those spacers 5x114.3, 64.1, 12.1.5? if so pls send the link i need those i’m on 1 inch but i need bigger

[@bocablue5691]

wait what? you do the welding as well?

[@duveedu826]

What bumper do you have on this car?

[@MrWesS13]

Dope like usual!! We gotta link up

[@OCTANEANDZIPTIES]

Appreciate it! And yessir!

[@ivan-qd9xk]

what app is that?

[@blanco_z3455]

its the measure app it used to be on the compass but apple moved it

[@greasemonkey912]

Shorting the spindles doesn’t lower the car!

[@OCTANEANDZIPTIES]

It allows you to go lower, I am aware. Although if your suspension isn’t completely compressed, because upper control arm is sitting on the top, then, yes, shortened spindles would lower your car.

[@jrsn294]

ALL THE STANCE, GIVE IT TO ME

[@pablocalvillo8921]

I’m about to cut and weld mine right now!

[@OCTANEANDZIPTIES]

Be careful, strong as well as done correctly thru and thru. Send them out to me and I’d love to help if anything🙏

[@zikeyy777]

how much would you charge if i sent ya my spindles? i have a spare set

[@em2attic]

Would you be able to do this to my g35 spindles? Im in California but can ship em to you no problem.

[@OCTANEANDZIPTIES]

Yessir, done plenty of 35/37 etc. done a few and shipped to Cali as well. Shoot me a DM @ Logan_lamb11 on IG

[@em2attic]

@@OCTANEANDZIPTIES BET!!!

[@RecziYT]

Currently struggling so hard to get that lower ball joint nut off

[@andrewbarrera1389]

Same, did u ever figure it out?

[@RecziYT]

@@andrewbarrera1389 I cut it 😭

[@andrewbarrera1389]

@@RecziYT damnnn Yea i was able to get one side off. Other side being a pain in the ass so ima resort to cutting it 😔

[@DROIDRAZR16]

Too much camber in front but good job

[@OCTANEANDZIPTIES]

Actually debated on going more, to each their own. Can do spindles to more or less camber, thank you though! Check out some of the other content, hope you enjoy(ed)

[@ZeussCastillo]

I dm’d you tryna get some work done💪🏽💪🏽

[@OCTANEANDZIPTIES]

DM my personal @ Logan_lamb11

[@drjimjam1112]

Doesn’t handle worth a damn, wears out tires like a drunk through a 5th of Gin, what’s not to like?!

[@OCTANEANDZIPTIES]

Handles well actually, and doesn’t eat through tires as most would expect. Good guesses tho!😁