LS400 TILTED/SHORTENED SPINDLES + WIRE HARNESS TUCK
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- Today we threw on some some of my parts to get this Lexus project going. Shortened and tilted spindles to not only lower the car more but add camber. It’s just the beginning to this crazy build.
•
Follow the boys on Instagram!
Logan’s IG: ...
Steven’s IG: ...
Octaneandzipties IG: ...
Highwaymob IG: ...
Highwaymob Website: www.highwaymob.us
#ls400 #ls400camber #ls400stance
The secret to get the front upper ball joint castle nut back on is jacking up the spindle so it puts pressure on the ball joint and It'll stop spinning enough you can tighten it with out air tools. ;-)
Sweet, thank you for the help. Figured out a good way to get them off and worked out super easy
Good to see another local TH-camr killing it ❗️Keep it up g 🤞
Dead Boy just tryna help others and make decent content🙏🏼
Very informative video!! Keep it up brother. You seem like a chill ass dude!
Appreciate it! Just trying to spit out some quality content to help everyone out!
that piece of metal is called perforated plumbers tape. Plumbers use it, for example, to hang pipes under houses.
Damn, this is an old video, thanks for the knowledge though💪
Yo what’s up with the cutting a window in the strut mount because of the spindles I thought shortening them avoids that?
Correct, shortened spindles is what’s necessary. Never cut a hole in the front strut towers😢
@@OCTANEANDZIPTIES that’s what I’m tryna avoid man thankyou for the reply 😂
Good video, I’m thinking about doing tilted spindles not sure who to go to.
Come through me and let’s get you set up. Shoot me a DM @ Logan_lamb11 on IG
When you shorten your spindles in the front what can you do to the back of the car to go lower in the rear even more if maxed out?
At that point, shorter springs OR different (shorter) coilover struts
I heard you say Gainesville, anyway y’all could help me with my spindles if I get a ls 400 next year?
Ya for sure!
Does tilting the spindles end up adding negative camber? If so how much. Also did you end up having to cut the top of the strut tower or was shortening the spindles enough to keep it from hitting.
Shortening the spindles ends up bringing the upper control arm down so it doesn’t hit the frame what so ever. Also, I tilted them and that’s what gives the camber (tilted for -10 degrees). If you just shorten them, you won’t add negative camber, if anything maybe 1 or two degrees of natural. Hope that helps
Octane and Zip ties Appreciate the quick reply! How much did you tilt yours in millimeters? Asking because I’m having a buddy tilt a set for me but I wasn’t sure how much I should do. Looking for roughly -10
Shoot me a DM on IG. @ Logan_lamb11
What’s the guy with the white ls400 ig🔥🔥?
Alexxbitch
How much is it tilted?
I'm new to the ls400 game and was wondering what is the purpose of shortened spindles? Plan on lowering mine was wondering if it's something I have to have.
To a certain point you can only go so low before the upper control arm starts to slap and hit the frame/top area. Shortened spindles are to not only go lower (air out lower if bagged) but also help with not having them hitting anything. If you’re looking for camber you would get shortened and tilted spindles
Hope that helps some
@@OCTANEANDZIPTIES thanks man makes sense now. What would I get them from? And did you roll your fenders?
Yes fenders are rolled. Before you do anything you need to tuck both side wiring harnesses before you run thru them and the car is worthless. Tilted spindles are made to spec. I made mine for -14 just frim the spindles
@@OCTANEANDZIPTIES got it! Appreciate the info man!
where you get your cut spindles from
I make them😁
the nicer cars are in the driveway bro
Ahahah not sure what that means but I’ll take that as a compliment
Octane and Zip ties 8:58 bro lol
Lmfaooooo yessssir!
And how much camber did you archive?
I’ve made and figured out the best way to shorten/tilt spindles. That vifro it ended up giving me like 7 but the current set I’m on is giving me -15 front
What are the wheels specs?
19x9.5 +3 and 19x11 -3
Swear I'm selling my 430 just to get a 400 with all the information you've got on your channel lmao
LMFAOOOO 🤣
Where did you get the shortened spindles?
Made them, hmu on IG @Logan_lamb11 I’ll be making a bunch of sets and selling them if you’re interested
Did you end up making them??
Ya, made and sold a bunch of sets so far. Shoot a DM @ logan_lamb11 if you’re looking for a set
Octane and Zip ties wow hella quick reply I appreciate that bro! And will do I’m looking for a set btw your LS IS GOALS I love the way it sits.
where did you get those tilted spindles from?
Made them
@@OCTANEANDZIPTIES how? Ive seen on IG that a shop did the same with an Acura TSX.
Shoot me an IG DM @ Logan_lamb11
lol caliper was off
BeD bUgs ????
8mins 5 secs loool
Octane and Zip ties good video tho man. learned some thiings