Rear Fairings Install! - Wrecked GSXR Rebuild Part 2
ฝัง
- เผยแพร่เมื่อ 29 พ.ค. 2024
- I am SO stoked to be sponsored by Auctmart Fairings for the 2022 season! I've been quietly working with them the past 2 months working on getting these custom set of fairings made for my 2015 Suzuki gsxr750 and they came out amazing! I honestly could not be happier with the fit and finish of their product! You guys know me, and I don't rep ANYONE who doesn't make a quality product. Reach out to Auctmart for your fairing needs. They make custom fairing kits, and standard fairing kits for just about every year make and model bike out there! Thanks for watching everyone and stay tuned for Part 3, the final episode of the wrecked GSXR rebuild series!!! =)
SALT MERCH:
saltxthexwound.bigcartel.com/
INSTAGRAM:
@SALTxTHExWOUND
Auctmarts Fairings - auctmarts.com/
MY CAMERA: Insta360 ONE R - www.insta360.com/sal/one_r?in...
#motorcyclefairings #gsxr750 #wreckedrebuild - บันเทิง
This is how I get through my morning when it's currently -6 degrees outside 😂🙌🏻
Omg bro that is crazy!! I lived in NC most of my life and I don’t think it ever got below 10° that I remember and that was colddddd!!! Stay warm bro!
@@SALTxTHExWOUND thanks man counting down the days till spring
@@davemcewen4748 I bet! Great time to wrench on the bike 😉🙌🏻
@@SALTxTHExWOUND exactly 🔧
I'm gonna start a GoFundMe so you can get more tee shirts 🤣
Bike is looking good bro
Lmao bro I haven't bought new clothes since Pre Covid xD
I just hate shopping honestly lmao
but thank you!
This bike is gonna look super nice 🏍💨
Thank you bro! It’s turning out amazing!! 🤩🔥🔥
I second that!
@@davebighos8370 thank you Dave!
Pumped to see the final product
Stay tuned, next week the final install goes up! 🙌🏻🤩
Perfect timing for this video. Replacing plastics on my 2015 750!
Awesome! Same year as mine too! Definitely check out auctmarts.com 🤩🙌🏻
This is coming together nicely
Thank you! Stay tuned next week for the final install and it all coming together 🙌🏻🙌🏻
Hey guys, when you put double sided tape like that you should use a heat gun so that the glue gets sticker and kinda' make it gooey so that when it cools down it will really grab and it will never come off.
The 2nd part of the rebuild, but the First part of my new Auctmarts fairing install! Stay tuned for part 3 where we’re complete the final steps to putting my GSXR back together, and what a change it’s going to be!! 🤩🙌🏻🔥🔥🔥
P.S. Hope you guys are staying warm up north!
What was your thoughts on the fairings? I got a kit from them a lil while back and am currently in the process of getting it all back together. I just wanna see what other ppl think of em.
The did a hell of a job cloning oem. All the ones Ive seen online looked oem good. Glad to see they’ve improved their fitment quality too. A lot of the older sets needed to be modded to fit
Yeah I noticed that also! These honestly fit better than I expected since I’m used to my OEM fairings. I have no complaints 🙌🏻👌🏻
Dang!!! That looks awesome! 😃👍👍👍
Very impressive fit with the bodywork. Really can't wait
to see all the bodywork on the bike. Gonna be a sweet
looking one of a kind showpiece! 😎👊❤🏍
Thanks for sharing and keep yourselves safe!
Randy
Thank you Randy! It’s turning out to be more amazing that I had anticipated!! 😍🤩🔥🙌🏻
@@SALTxTHExWOUND Oh man! You'll be turning heads everywhere! 😃👍👍👍
The bike is coming along great!
Thank you bro!!
Lots of waters and damn that new hose looks killer 😂
Coming along real nice!
Thanks Ivan! Stay tuned next week for the final install 🤩🙌🏻🙌🏻
Looking great! You weren’t wrong about that fitment!! 😃
Thanks mate! Fitment is nothing short of perfect 🙌🏻
This is beyond amazing ! and funnnnn! but staying warm thank you very much, so used to it like you are there with the heat, I almost faint in the sun when its 75 without a breeze 🤣
Wow - she's coming along nicely - and you can start to get a taste of the finished product - I will definitely be tuning in for the next instalment - thank you for sharing!
Much appreciated! Thanks for watching! :)
Really impressed by the fit and finish. 👍👍
❤❤❤
You and me both! They do excellent work :)
Looking good bro! 🔥🔥 👊🏼
Thanks Scott! Final install will be up next Saturday 🙌🏻
Gonna B 🔥🔥🔥🔥 can't wait to see the finished build 💪🏽💪🏽
Thank you brother!!! You’ll get to see it all together next Saturday!! 🤩🙌🏻
Looks good again.. Ride safe brother..
Thanks John! Ride safe!
Coming along nicely. Nothing like new fairings.
You got that right! Thanks for tuning in, final install will be up this weekend!
At this rate , you might become a " nascar body man "
Nice job thus far , hope front end goes as smooth.👍
Haha I don’t even know what that is but it sounds like it pays well 😂
Final install goes up next Saturday 👌🏻
Can’t wait to see the end result. I also don’t believe I’ve ever seen this specific color combo on the current gen 600/750s. I have come across other k8/k9 colors on the newer bikes but not this one. Going to look awesome! Oh and you’re hair looks great by the way 😂
lmaoooo thanks Jeremiah! I haven't seen this colorway on the newer gen either, hope to keep it that way haha final install will be up next week! :)
Coming along. Looking good
Thanks Frank!! Definitely a huge change!
@@SALTxTHExWOUND can’t wait to ride up there with y’all
Can't wait for part 3, that silver tail is looking sweet 👌👊🏴👊🔥🔥🔥🔥
I’m gonna order an auctmart fairing set just for the hell of it
You can’t go wrong! 🤩🙌🏻
Looking good so far. I love the color
Did you see the 2022 Orange? Looks incredible!
Yes! Reminds me of the old k9 I believe it was! 🔥🔥
The bike is going to be awesome man I am waiting for parts for my gsxr 750 I have to put a new radiator on my 1996
Thanks man! How many miles on your 96’ gsxr??
It has 72000 km
nice I hope I can see you on track, going down south for 2 days of track.
jennings feb 20-21
Awesome! We’ll be at Jennings this weekend!
@@SALTxTHExWOUND hope you guys can made it for the spa weekend as us. it will be nice to learn that track from you.
Vid so good I brought all these thumbs ups 👍👍👍👍👍👍👍👍👍👍👍👍💯💢
My man! Thanks for stopping by! :)
@@SALTxTHExWOUND really great job. Can't wait for the next one.
What is the plastic piece of the tail called that sits underneath the seat? I have a split in the plastic between the two rear lights. How would I replace that?
Dude that is wocked cool. Hurry up and show us the end product already
Thanks Keith! You'll get to see the end product next saturday! Thanks for tuning in :)
I was always reclipping that damn thing on my 13 750
Lol yep! I reclipped mine at least 4-5x the first 6 months I owned my 750 then I finally decided to find a fix and this works perfectly! :)
I know this vid is old, but does anybody know on what years are the tail farings interchangeable? I have a 06 750 that needs a new tail and would like to change it to a newer version. Thanks
What sizes are the push rivets?
so what you're saying, I should use Auctmart for replacing my fairings on my k7?
I wouldn’t hesitate to go with them again. 1.5 years later and they still look great!
Where did you get the pack of push pins for the motorcycle?
They came with the fairing kit.
I’m on the market for a roller chair. How do you like the one you have? Wondering if the one with drawers would come in handy? Really like the color scheme of your ride. New sub.
Hey thanks! Drawers would be nice, but this one works well and I like that it’s round. I think I got this one at harbor freight for like $30 maybe?
@@SALTxTHExWOUND thank u!
How long was shipping from auctmarts?
It took about 5-6 weeks from the time of the order.
So you just not gunna put the push pins under the tail section?
Yes sir! The finished product is up on my channel :)
Remember the back brake
🔥🔥
My fairings are currently in Hong Kong 😂 but they are in transit so we good
Hopefully you get them soon!
I got ZXMT fairings and they are garbage. Waist of money and time. So don't thing they're going to be awesome simply because you get ZXMT fairings, just a warning to everyone looking for new fairings.
had one set ordered on my k1 and one more on my k6 , both in the long term is pure crap , fitment issues , quality realy sucks , ok its cheap but you pay for what you get. nothing will beat the standard original oem parts