Peugeot 508 wipers not working as it should U1F3A
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- Hello Everyone! In this video i managed to fix the wipers for peugeot 508, the problem was the communication between the BSI and the master wiper motor (driver side) U1F3A. The wipers started working after starting the engine with an erratic behavior.. in this state of no communication with bsi you have no control over the wiper stalk. On the communication line there was a short to ground thru a SOT-23 transistor or so i suppose, from the smd markings i couldn't clarify the exact role, i've replace it with the exact same component from a donor board. Try not to skip the video and read the annotations. If you don't have at least experience with a multimeter or wiring diagrams please go to a specialist and try not to damage your car more . I can't afford a dslr camera for better image and details, everything is recorded with a phone, consider these images a go in the right direction for you to try to solve the problem faster. You can contact me thru my email adress servicelaptopelectronic@gmail.com
Nice work master !!!
Thanks for the video. Without it, I wouldn't have gotten the idea that the soldered pins hold the board in the case. :)
In my case, the SME items were burned on the other side near the 27E switch. I found a similar solution much cheaper in Ford Galaxy MK3. I hope the SMD items will be the same. I believe the MCU has survived. :D
Hello how do i see what is damaged? Mine is bad but i dont see anything wrong there
Thanks for the video. Does this mean that for the car 2012 year old i will buy used wipe motor 2015 year old and replace bosch microcontroller D0865fd the wipes will start working ?
You should make more videos, maybe the proces of finding on the board of the short. Thanks
Та деталька-то захист від статики. Як правило, проблема в проводі неподалік від лівого мотора
Please do u know more exactly wich one?
Hello! Can you provide more infos?