PEUGEOT 106 - 1999 Schlüssel verloren - lost keys - immobilizer location
ฝัง
- เผยแพร่เมื่อ 16 ธ.ค. 2023
- Peugeot 106 Bj. 1999 Alle Schlüssel verloren
Hier hatte ich den Eeprom nicht richtig gelesen.
Beim Vergleichen hatte ich auch ein Problem.
Nach dem Motto "Es wird schon stimmen" habe ich weiter gemacht.
Es stellte sich heraus, daß dies ein Fehler war. Nach dem ich den Eeprom ausgelötet habe, stimmte die ausgelesene Datei und der programmierte Transponder startete das Fahrzeug.
Peugeot 106 year 1999 all keys lost
Here I hadn't read the Eeprom correctly.
I also had a problem when comparing.
According to the motto “It will be right” I continued.
This turned out to be a mistake. After I unsoldered the Eeprom, the file read was correct and the programmed transponder started the vehicle.
ALLE AUF DIESEM KANAL VORKOMMENDEN MARKENNAMEN, WARENZEICHEN UND EINGETRAGENE WARENZEICHEN SIND EIGENTUM IHRER RECHTMÄSSIGEN EIGENTÜMER UND DIENEN NUR DER BESCHREIBUNG / VERANSCHAULICHUNG / IDENTIFIKATION
ALL BRAND NAMES, TRADEMARKS AND REGISTERED TRADEMARKS APPEARING ON THIS CHANNEL ARE THE PROPERTY OF THEIR LEGAL OWNERS AND ARE USED FOR DESCRIPTION / ILLUSTRATION / IDENTIFICATION ONLY.
Thank you for the video. My experience is that only the Autel programmer is good with clip. VVDI gives problems with the clip. Even had this week Iveco daily 2001. Read with autel programmer and vvdi2 gave wrong pin and IDs. Autel gave the right one. So even the tool can make a difference in data decoding.
Odličan posao majstore!
I always desolder the eeprom the reading is more reliable and, contrary to appearances, the work is done faster
good job
THANKS FOR THE INFORMATION
Good job as usual! Thank you for sharing.
Gute Leistung schöne Weihnachtszeit von deinem Kollegen aus Berlin
Thank you very much for sharing
Hi, like your vids 👍. Little problems make us better. )
Very interesting. Thanks for sharing that.
I desoldering eeprom every time, in circuit reading is many times different/bad...you know that, good video :-)
TOP 👍
красавчик я всегда выпиваю епромм
Good job sir
The voltage for in-circuit programming needs to be reduced to 3 volts and the eeprom will be read normally
Hi , Dariuz did you read in 5 volts ?In most times i prefere to remove eeprom from board,becouse when you read it in circuit you power up procesor too.Many coleags shorts xtall /oscilator/ and then read it in circuit.
Interessant auf jeden Fall, ebbes dazu erzählen wäre gut
Aber die "Musik" im Hintergrund macht einen halt schon a weng deppert ;)
musik ist geil 😛
@@autoschluessel_hamburg Dann solltest dich auf Musikvideos konzentrieren, dann passt das ;)
Dachte immer, es geht primär um den Inhalt :P
👍
ЗДРАВСТВУЙТЕ ОЧЕНЬ ХОРШЕЕ ВИДЕО СПАСИБО,А НЕТУ У вАС СЛУЧАЙНО ДАМПА БЛОКА ИСШ ЗУПЩ 307 2002 ГОДА КОТОРЫЙ НА ПРОЦЕССОРЕ ТО ЕСТЬ ЕЕПРОМ ВНУТРЕННИЙ
Show ...
У меня не получилось положить xt27, буду пробовать xt15.
Pcf7935???