Other than blowing my mind with your rocket science vehicle engineering and wiring. I am so proud of your wife and her abilities. I am so excited about that fact your having are having a child. You are awesome, I am so happy for you. Thanks for all the great videos. I wish the best for you and your family. Keep up the great work you have always been doing. I am a huge fan of Lite Brite Nation. And you are a bad ass mechanic. You rock
What a deep knowledge field you have! Even diffs from far away places like England! And Pam gets her hands dirty too. Lots of hints about getting your own YT channel - we all knew it would happen! Best wishes! You always keep us entertained and learning. Hair? Where? How'd it get there?! LIteBriteNationDifferentiates!
Chris, your going to make a outstanding father. It won't be long till we see the baby out in your shop helping you. God Bless wishing you the best. Hopefully you find the time for your own You Tube channel.
That is one great thing about Ashcroft - every single part is listed out separately and available. Mine is still alive pushing a D1 on 39.50s - of course I do keep in mind that it's over-taxed in that application. This spring we should have a bolt-in 35 spline setup ready to go!
Ashcroft is a great company. Recently (last year) built a locking lt230 with a ton of their parts. Great customer service, relatively quick shipping from the UK.
What exhaust are you running on your burgundy Rover? Sounds great. And what adapters are you running on the silver one for the Jeep wheels? I have a 99 DII.
Chris you gotta make sure to tell us 1 when your leaving and 2 where your going and 3 how to be able to keep following you. I love you build videos. 🤘🏻
The rover wheels are 6 on 6.5 bolt pattern from bomber car correct? Itd be really cool and unique to see Chris incorporate that bolt pattern into the superduty axles when he does the swap for some unique content
Super common for an axle break to damage a locker, sometimes not noticed when replacing the broken shaft, then you find out on a subsequent trail ride !! Two big things I like about the Ashcroft lockers, One is parts availability (Vs ARB's policy of stupid expensive and often discontinued parts) The other is the billet steel locker case... The ring gear flange doesn't break off on these, like the ARB cast iron case. Wish Ashcroft would make these for other popular axles.
Looks at Pam being a freaking rockstar!! ❤ Where did you find her Chris? Do they have anymore? 😂 Quite obvious you need to start your own channel at this point.
@@pam_in_boots That is a good man he knows you can do it but doesn't want you to overdo it. You guys are great together for sure. Hope all is well and that you're blessed in any and everything you guys do in the future. Keep up the great work both of you.
When this shop deal started I thought kevin and brittney were gonna be in the shop some.They however basically let you be over half their videos main content while they play but I guess good for them bad for you lol.Congatulations on your new adventures and good luck!
Get your channel up with just a welcome note so we can all go and subscribe while you're still with Lite Bright Nation! Looking forward to both of you's new 'creative fabrications'!!!
Pam is famtastic! British vehicles are so noble they have never admitted errs. Or heirs from the wrong side of town. Pheobes is a.. cross tracker for sure.
Will always love (Lite Bright) regardless. But (Us and you both know) your channel is going to happen. Just more great videos for us to watch!!! We believe in you Chris. The way you handle stress like you do. TH-cam won't be any worse. We all can have are moments,and that's fine. We are all humans. Just do your thing.... Love you Lite Bright❤.
@@pam_in_boots Nah, we can tell you know some stuff. I can understand you were camera shy, but now you're just holding back because of the baby. Understandable. You guys are gonna be killin' it in the new channel!!!🤙
Don't blame yourself man. Ashcroft diffs are well known to detonate. They often come from the factory loose and need to be gone through before fitting.
Chris, be sure to tell us all your know new channel name when you figure it out. I am sure you will be the fastest channel over 100k on record. Congratulations dad and mom to be.
It's really going to be sad when Chris actually leaves the shop. Hey Brittany what song is that playing during this video? Thanks. Please Chris make a TH-cam channel. Shop talk with Chris would be awesome. Lite Brite nation for the win 999 bomber nation for the win. Can't wait to see Kevin get a trophy truck soon.
You're a much better man than I Chris 😂 I wouldn't let my wife be around me when I work on any vehicle. She drives me nuts with all her questions 😅 I'm like, can I just get this done please 🙏on a side note: I can't wait to see your new channel! I'm also interested to see who will be working on step child and all the other fun toys when you're not available.
I know you are leaving the channel. If you start up another Channel let us all know. I will watch I enjoy this part of the channel the most. Without ya the channel will take a hit.
Your own channel would be great. You make the build educational along with being fun to watch. You don't just slap parts on and go Bam bam. Thank you, ma'am, no, you walk us through it. You tell us why you're doing it and the way you do. It is educational. That's why i'm watching so if you get your own channel I will subscribe.
Looking forward to your new maybe channel and Chris after living and working with Kevin and Britney no one would ever blame you if you went just a little crazy. Looking forward to see what you and Pam do next.
As some might consider your channel a "spinoff" of lite brite, howabout naming it after some random 80's toy... like a Lite Birte... ya know? Ill go first: Hungry Hungry Hippos Garage
Our household will Deffinitly be watching your new channel !! Cheers Chris and Pam
What's the channel?
Good luck with you and your family Chris
Pam is awesome ! Love to see someone helping Chris.
Looks like Pam is getting more comfortable about being on camera. 😁
Definitely need to start your own channel when you leave, love your attention to detail and personality.
I like the fact that Pam gets in there and gets dirty. Happy Trails to all at LBN.
Other than blowing my mind with your rocket science vehicle engineering and wiring. I am so proud of your wife and her abilities. I am so excited about that fact your having are having a child. You are awesome, I am so happy for you. Thanks for all the great videos. I wish the best for you and your family. Keep up the great work you have always been doing. I am a huge fan of Lite Brite Nation. And you are a bad ass mechanic. You rock
What a deep knowledge field you have! Even diffs from far away places like England! And Pam gets her hands dirty too. Lots of hints about getting your own YT channel - we all knew it would happen! Best wishes! You always keep us entertained and learning. Hair? Where? How'd it get there?! LIteBriteNationDifferentiates!
Chris, your going to make a outstanding father. It won't be long till we see the baby out in your shop helping you. God Bless wishing you the best. Hopefully you find the time for your own You Tube channel.
Can't wait for the channel. Good luck to you and your family.
Lucky man having your Pam into the same stuff!
Pam is a keeper, love that she is getting more comfortable on camera. You definitely need your own channel!
Good luck moving forward with life. You two look good on camera. Keep it up. Thanks
100% Pam is a rock star ! Your in trouble Chris I think it’s goings to be called Madness Fabrication “with Pam”😂😂
I'll definitely be subscribing to your channel! Thank for all the good content.
Nice.👍 I spent the day working on my LR3.
Pam and Chris are a winning combo! Great video together.
You’ll go far together having in common similar interests, AND her ability/desire to “wrench” with you. You’re a lucky man.
That is one great thing about Ashcroft - every single part is listed out separately and available. Mine is still alive pushing a D1 on 39.50s - of course I do keep in mind that it's over-taxed in that application. This spring we should have a bolt-in 35 spline setup ready to go!
Ashcroft is a great company. Recently (last year) built a locking lt230 with a ton of their parts. Great customer service, relatively quick shipping from the UK.
Chris and Pam I'm glad you both got it fixed. Here you go Chris and name for your channel His and Her Garage
Probably too late now, but Lucky8 sells great solid motor mounts for the D2. Broke my stock driver side on Beasley Knob last October.
What exhaust are you running on your burgundy Rover? Sounds great. And what adapters are you running on the silver one for the Jeep wheels? I have a 99 DII.
Love the Chanel can't wait for your new Chanel Love how you do everything so neet and you explain how you do things thanks for sharing
Chris you gotta make sure to tell us 1 when your leaving and 2 where your going and 3 how to be able to keep following you. I love you build videos. 🤘🏻
I will definitely be following you if you start your own Chanel
The rover wheels are 6 on 6.5 bolt pattern from bomber car correct? Itd be really cool and unique to see Chris incorporate that bolt pattern into the superduty axles when he does the swap for some unique content
Or use the OG Rover pattern of 5 on 6.5 with M16 studs. Just to confuse people. (granted, his D2 uses the newer/smaller pattern)
Super common for an axle break to damage a locker, sometimes not noticed when replacing the broken shaft, then you find out on a subsequent trail ride !! Two big things I like about the Ashcroft lockers, One is parts availability (Vs ARB's policy of stupid expensive and often discontinued parts) The other is the billet steel locker case... The ring gear flange doesn't break off on these, like the ARB cast iron case. Wish Ashcroft would make these for other popular axles.
Looks at Pam being a freaking rockstar!! ❤
Where did you find her Chris? Do they have anymore? 😂
Quite obvious you need to start your own channel at this point.
Chris’s Craft would be a good channel name.
Lucky to find a lady that is capable of spinning a wrench 🙏👍
What about something like C&P Fab?
ALOHA CHRIS AND PAM!!!! awesome job on the front diff , PAM make sure to have CHRIS do ALL the heavy LIFTING OK?!
He doesn’t let me pick up anything heavy lol
@@pam_in_boots That is a good man he knows you can do it but doesn't want you to overdo it.
You guys are great together for sure. Hope all is well and that you're blessed in any and everything you guys do in the future. Keep up the great work both of you.
Definitely need to start your own channel and 🎉🎉🎉🎉❤❤❤ awesome job
I like tooling around with Chris and Pam especially with the sound effects .lol if you start your own channel I'll watch. Take care of you two
I definitely watched the sfx intro 10 times and giggled like a little kid the whole time
as saying goes, "Many hands make light work." should say Many competent hands make light work.
When will we see Pam's Bronco
After we get moved and settled in.. we will start working on her ☺️🎉
She's a keeper for sure...jumped right in there...new channel let's make you famous
Chris is you aware, just how fast your own channel is going to explode, when it’s launched?!
Can hardly wait.
I really hope you guys do decide to keep you tubing. Because I will be watching on a regular basis if you do
When this shop deal started I thought kevin and brittney were gonna be in the shop some.They however basically let you be over half their videos main content while they play but I guess good for them bad for you lol.Congatulations on your new adventures and good luck!
Looking forward to seeing you guys on your new channel.
Chris and pams garage would be a good one.
Thanks to Pam for doing a great job. Soon Chris will just be doing the heavy. Lol. Great job guys and good luck in the new future
Chris's fix sounds good
Bro thought the same thing. Needs some merch too.
Alreay a YT guy with a Channel Chris Fix.
Get your channel up with just a welcome note so we can all go and subscribe while you're still with Lite Bright Nation! Looking forward to both of you's new 'creative fabrications'!!!
Pam is famtastic!
British vehicles are so noble they have never admitted errs. Or heirs from the wrong side of town. Pheobes is a.. cross tracker for sure.
standing by...will definitely be following you.
Will always love (Lite Bright) regardless. But (Us and you both know) your channel is going to happen. Just more great videos for us to watch!!!
We believe in you Chris. The way you handle stress like you do. TH-cam won't be any worse.
We all can have are moments,and that's fine. We are all humans. Just do your thing....
Love you Lite Bright❤.
The channel should be called “Ruh-Rover”
Awesome Chris, i'm already a subscriber, just need to know what to click on brotha!!!
House of Payne?!?
Connect Four Offroad....for the win.
Pam in camera is gold
Is Pam also a mechanic/tech? If she isn't, she can fool anybody!!! 🤙
Shade tree mechanic 🌳 by necessity lol 😂
@@pam_in_boots Nah, we can tell you know some stuff. I can understand you were camera shy, but now you're just holding back because of the baby. Understandable. You guys are gonna be killin' it in the new channel!!!🤙
Trail Damage Repair's
good luck you guys!
Don't blame yourself man. Ashcroft diffs are well known to detonate. They often come from the factory loose and need to be gone through before fitting.
Can't wait for the new channel. Will be one of my top watched.
I love all the Rover content on the channel. Keep it up. more Rover stuff please.
Pam for the win !!
What are your thoughts on Ashcroft vs ARB when it comes to Discos and Defenders? Splitting hairs, or are there big differences?
That's that Rover life stuff right there. Carry on Chris.
Health, Wealth and Hapine$$ to you, Pam and Chris, we look forward to your own channel : Chris' s Chronicles ? or : Chris's Crankin's ?
Will definitely be subscribing to your channel when you get it up and running.
Chris, be sure to tell us all your know new channel name when you figure it out. I am sure you will be the fastest channel over 100k on record. Congratulations dad and mom to be.
You're going to do awesome Chris. very cool.
What are the plans for your
Bronco?
It's really going to be sad when Chris actually leaves the shop. Hey Brittany what song is that playing during this video? Thanks. Please Chris make a TH-cam channel. Shop talk with Chris would be awesome.
Lite Brite nation for the win
999 bomber nation for the win. Can't wait to see Kevin get a trophy truck soon.
Chris and Pam - Looking forward to the (your) future!!!
I’m going to miss you Chris! Good luck and all success in world,, ❤😊
You're a much better man than I Chris 😂 I wouldn't let my wife be around me when I work on any vehicle. She drives me nuts with all her questions 😅 I'm like, can I just get this done please 🙏on a side note: I can't wait to see your new channel! I'm also interested to see who will be working on step child and all the other fun toys when you're not available.
Good thing I’ve assembled and disassembled this drive train like three times.. 😂 so there were no questions needed at this point lol 😝
Yes I would definitely watch your videos!
I enjoyed this rebuild video!
Just send it Baby !
Chris Fix it oh WAIT
Cant wait for your channel, long over due!
I know you are leaving the channel. If you start up another Channel let us all know. I will watch I enjoy this part of the channel the most. Without ya the channel will take a hit.
Chris, you definitely should do your own TH-cam channel!
You know you're just teasing us, good luck with the channel Chris
Definitely need your own channel!😊
New channel name, "Hair in everything engineering."
Your own channel would be great. You make the build educational along with being fun to watch. You don't just slap parts on and go Bam bam. Thank you, ma'am, no, you walk us through it. You tell us why you're doing it and the way you do. It is educational. That's why i'm watching so if you get your own channel I will subscribe.
Looking forward to your new maybe channel and Chris after living and working with Kevin and Britney no one would ever blame you if you went just a little crazy. Looking forward to see what you and Pam do next.
New channel.....SUBSCRIBED!!
Probably have at least 100,000 subscribers in the first month.
Hope you start your own channel, sometimes I just need a healthy dose of tech.
Go for it , everyone will follow you.
Chris what fab table is that?
Isn't the Range Rove well known for breaking?
Yes buttttttt….. Chris is well known for fixing 😉
great job again.
Backup and send it 😂
🤣🤣 That intro!! Rad video as always Chris!
Dam Chris Pam can wrench , right on 👍 . And hey get that front fender fixed 😂 to nice of a Rover to be driving around dented 😂😂
You definitely need your own channel
how about Bright Light off road?
Channel name could be "C&P" 😆😆 -- Inside VA Joke. If you know you know
Pam looks good twisting that wrench.
Curious why you like Rover’s. Seems to always be broken. And congrats on the baby. Def get your own channel going.
Everything on this channel breaks and gets fixed 😝… that’s why there is a channel lol 😂.. gotta have content right ? 😜
Chris, you should make your new channel. Chris' Corner lol
As some might consider your channel a "spinoff" of lite brite, howabout naming it after some random 80's toy... like a Lite Birte... ya know? Ill go first: Hungry Hungry Hippos Garage
Eyecrometer Engineering