1990 Kawasaki 400 / 440 / 550 / 650 Stand Up Jet Ski Flywheel Replacement

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ม.ค. 2025

ความคิดเห็น •

  • @JetSkiBuyFixPlaySellChannel
    @JetSkiBuyFixPlaySellChannel 6 ปีที่แล้ว +1

    Some people say you should use lapping compound and lap the surface between the flywheel and crankshaft. Very informative video!

  • @bl3nd3rs
    @bl3nd3rs 7 ปีที่แล้ว

    Very helpful video! Trying to diagnose my total loss ignition system and wanted to take a look at the flywheel condition.

  • @CLGPerformance
    @CLGPerformance 2 ปีที่แล้ว +1

    Don't put rope in the spark plug hole!. Use the teeth of the flywheel and a bolt from the cover and a large flat screwdriver. It will hold it

  • @debower59
    @debower59 7 ปีที่แล้ว +1

    Hey man, noticed you're from Iowa! I ride saylorville around Des Moines and Blackhawk lake in lake view a lot! If you're around there let's ride!

  • @PeterWalke
    @PeterWalke 7 ปีที่แล้ว

    An impact gun will get the flywheel bolt off easily if you have one. To tighten, I pulled the starter pinion out to engage the flywheel and then wedged a screwdriver in the gears.

  • @kyleparsons1681
    @kyleparsons1681 7 ปีที่แล้ว

    Great video! Also do you have any videos of you pulling out a starter in a 650? If so that'd be great to see some instructions on how to pull out one of those suckers

  • @dillioncoolidge1785
    @dillioncoolidge1785 8 ปีที่แล้ว +1

    mine wont even turn do you think my engine is shot?

  • @stash420
    @stash420 6 ปีที่แล้ว

    what kind of oil did u use

  • @EnemyDwarf-TTV
    @EnemyDwarf-TTV 4 ปีที่แล้ว

    do you know if all the flywheels are the same size 440/550/650?

  • @fishtail3052
    @fishtail3052 3 ปีที่แล้ว +3

    Y did u do this video u skiped all the important stuff and showed the obvious stuff

  • @coreymiller9619
    @coreymiller9619 5 ปีที่แล้ว

    I know this is a long shot because the video is a few years old but any tips on removing the stator wire from the engine block.. I am trying to take the motor out of the hull but don't know how to remove that wire without yanking it and ruining it .. thanks for the answer if anyone sees this and has one :D

  • @johnrichie4079
    @johnrichie4079 7 ปีที่แล้ว

    I have a 440 my haul keeps taking in water don't know where else to look