How to Replace Tail Light 12-14 Toyota Camry
ฝัง
- เผยแพร่เมื่อ 4 มี.ค. 2019
- Buy Now!
New Tail Light from 1AAuto.com 1aau.to/ia/1ALTP00813
1A Auto shows you how to install, repair, fix, change or replace a broken, damaged, burned out, cracked, faded, cloudy or chipped tail light / brake light. This video is applicable to the 12, 13, 14 Toyota Camry
🔧 List of tools used:
• 10mm Socket 1aau.to/oqB/1AXAA00017
• Trim Tool Set 1aau.to/oen/1AXXX00004
• Ratchet 1aau.to/oyh/1AXAA00016
• Socket Extensions 1aau.to/oto/1AXAA00015
For More Info visit us at 1aau.to/h/Yn/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Excellent video. Just one comment - if you are only changing one side, you do not have to remove the entire bumper cover. You can remove the clips and side bolts for one side and all the bottom bolts and pull the cover back on one side and the lamp assembly comes out easily. New one goes in just as easily. This saves you the trouble of having to pull off and put the bumper cover back all the way around. All else is perfectly shown on the video. Thanks much.
that's exactly what I was going to say I just wanted to check if someone else said this and you did. I also dont think it's necessary to undo the bolts under the car on the side of the replacement.. am I right?
@@Gajh2014 I think you might be right. I removed the bolts since it was easy but you might be able to get away with just removing the bolts and clips on the wheel well part and pull the bumper back. What I didn't want to do was go through pulling the bumper off the center top supports which seemed like would be a pain to remove and replace.
00ppp
Great tutorial and a perfect example of going extra mile for the best customer satisfaction. I was able to find the same part cheaper by ten dollars on a different website but decided to buy from 1A Auto because they spent time creating this tutorial. The product arrived fast and in excellent condition.
As stated in previous comments, if you are only changing one side, you do not need to pull the entire bumper down. Finding the bolt in the wheel well was a little tricky for me as I did the job without lifting the car from the ground. I have a 2014 Camry LE and my harness cable was not on top of the 4th bolt as mentioned in the video, it may be a change Toyota made on different year models. Thank you 1A Auto
Good video. I have a 2012 Camry Hybrid and there are two differences that people should be aware of though. I don’t know if all 2012’s are different or if it’s just the Hybrids.
1. There are a total of 4 body clips holding the bumper cover in place on my car. The two you show and two more near the left tire.
2. There are four white body clips holding the plastic trim piece in the trunk (the piece that surrounds the trunk latch) that stopped me from pulling it out. I had to remove all of the clips holding it in and pull the plastic trim piece straight up to remove it.
This was very helpful. thanks for sharing. If I don't find a junkyard light, I will buy from you guys
Super easy to follow changed the right taillight in about 10 mins
Great video well made very clear
Is it same part for SE and other models. I have 2012 SE and want to make sure it is not different for each model (dealership mentioned it is). TIA.
Thank you so much for posting this video!
You ma'am, are a beast lol I subscribed right away.
+Aaron Nava Thanks for checking us out!
@@1AAuto No problem! I need a trunk replacement on my 2013 Toyota Camry. It got bent up. What would I type in on yalls website to find one?
Could you do about BLINDS SPOT MONITOR for Camry 2013. Thanks
Can you do a 2013 Avalon taillight?
Can a 2013 Camry tail light lens cover be put on with glue only
is it possible to change one side tail lamp assembly without lifting the car?
WTF was Toyota thinking?
They weren't. Ridiculous
I just want to find out where she got that cool socket wrench that converts to a screwdriver!
Harbor Freight , got mine there
You gotta be kidding me. You gotta take bumper off????? 🤦🏽♂️🤦🏽♂️🤦🏽♂️
Do you have a video for a 2015 camry?
+Katie S We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c
It looks as though removing the bumper cover is not absolutely necessary. Does it actually overlap the taillight cover, or could you do this without removing the bumper cover? Thanks!
Great video, by the way. Very clear.
Aha! The "tail light eyelet things". That's why you need to remove the bumper cover. Tried it without, no dice. Thanks again for the great video!
+alan2a1l Thanks for the update and for watching!
@@alan2a1l Thanks for the video. I did manage to replace the taillight without removing the bumper in our 2012. It fits and works perfectly.
@@dongenson2303 That didn't work for the 2014 Camry SE
@@alan2a1l I HAVE THE 2014.5 SE SPORT IN BLACK FULLY LOADED!!!!
Well done , but not really clear on why bumper needed removed
+Wade Harrison Thanks for the feedback!
The bumper cover overlaps the taillight assembly. You could probably get away with undoing 1 side at a time.