With the constant changes with new importing tariffs and material costs, we try not to post prices on here because it may change depending on when people read it. Please contact us by phone or e-mail for accurate quotes for when you need it. We can be reached at 626-442-3150 and are available 10AM-5PM PDT weekdays and 10AM-4PM PDT Saturdays. We can also be reached by e-mail 24/7 at sales@88rotors.com. Thank you for your interest in our products/services!
It means they probs have to stick the weights on the outermost edges of the inner battle because of not the weights will clip the caliper and get thrown off
I can't believe 35s fits with a 3" lift. :o I have a 3" lift and 33x12.5 on 20x10 -19, and barely fits after the body mount chop. How good idea is just simply remove the liner extension on the front? All the wet and dirt will hit the back of the fog lamps. Have you had any issue with that?
@@iceman-ko6xi I’m still on my stock wheels but just on Nitto Grapplers in 285/70/18. Did the HP Tuners custom flash which improved the engines performance and throttle response.
@NYC-2-BKK thats cool. I'm getting my truck lifted 3" BDS, 17" method bronze wheels, 35" Recon grapplers. getting all installed in April. also getting Wescott rock sliders. I'm east coast too. I'm getting my work done at a place called No limit. in Baltimore. thanks for getting back to me.
Yes, that’s why we did it. Spacers will make it rub even more. If you want your truck to perform properly with a 3” lift and 35’s then you’d have to get a chop done for full clearance with articulation.
SUBSCRIBE & LIKE FOR MORE DAILY VIDEOS!
R8 coolcat, pickup suck.....
Great looking truck. The 3" lift with 35's gives it a perfect stance.
Beautiful setup. If it were a build for me,I would put fender flairs on as the wheels are a bit proud of the side lines for my liking.
Man I Love it, and the wheels and tire package is on the ONE ! Great job fellas I’m a big fan since last week I subscribed
Awesome build! I would have went with 18’s but that’s just my preference. Well done!
It is amazing I love you guys for doing what the truck wants
Man this looks sharp. I need to reach out to you guys so that I can take the drive to Cali fro the East Coast to make it happen.
Big fan of 88 rotors. Keep up the good work.
Love the rims!!! Excellent choice
Excelentes rines, muy buena suspensión
How much did this complete setup (suspension, wheels, tires) cost with labor??
With the constant changes with new importing tariffs and material costs, we try not to post prices on here because it may change depending on when people read it. Please contact us by phone or e-mail for accurate quotes for when you need it. We can be reached at 626-442-3150 and are available 10AM-5PM PDT weekdays and 10AM-4PM PDT Saturdays. We can also be reached by e-mail 24/7 at sales@88rotors.com. Thank you for your interest in our products/services!
88ROTORS thanks email sent
Awesome build. I have a 2018 tundra and I am looking for the same build.
Dude i have the same setup..only difference is i got ae's and 20 inch rims the rest is the EXACT same
Not a fan of the wheels but the work is spot on...
No worries, everyone has different taste. Thank you!
When you guys say "special balancing" to fit the 17" wheels, what exactly does that mean?
It means they probs have to stick the weights on the outermost edges of the inner battle because of not the weights will clip the caliper and get thrown off
@@xXRandomVids56Xx Gotcha. Thanks!
I can't believe 35s fits with a 3" lift. :o I have a 3" lift and 33x12.5 on 20x10 -19, and barely fits after the body mount chop.
How good idea is just simply remove the liner extension on the front? All the wet and dirt will hit the back of the fog lamps. Have you had any issue with that?
Gorgeous tundra
Them wheels would look great on my Sunset Bronze 1794
looking to get a tundra soon ... THIS LOOKS GREAT
I want my 2012 to be done up like this.
Great build but the 4.5" BDS kit is a great height not to high and not to low.
CLEAN ✨✨✨✨✨
Great build
Looks awesome! Question: do you have to change the gearing with 35 inch wheels?
I believe it doesn't need any gearing changes until you push 37's or bigger.
Love it but wish it was little lower. Idky I like low and wide stance. RC type
love those methods in bronze with the toyo's
Love it! Question though did u only remove the rear sway bar?
Yea just rear sway bar and mud flaps. Of course the obvious parts that were replaced also. Thanks for viewing!
Like the wheels and tires. I think they would look better with 6 or 7 inch lift
Very beautiful truck i wish come to my country.
Love the wheels
Looks awesome! How do you guys like the Icon products.
Superb
Awesome build, do these make the ride smoother on the road? my stock ones makes u feel every bump lol
Nice work! How much more trimming would be needed to fit 37x13.5 tires with 18mm offset? And how much does a body mount chop run??
Will oem 20” wheels still work with this lift?
Is bad ass just bought my self a 2020 tundra Trd sport 2x4 and want to do a 3” lift but I’m afraid I might lose the smooth suspect ride
Looks great, any drop diff spacers needed?
I love this setup and want to do it to my 2015 Tundra SR5 can I get some info and cost of parts?
Hey that looks great. I was wondering what the offset is on those wheels you put on there?
I like it !!👍🔥
Would like to go there and take my 2020 tundra,but I am little scare about my warranty
Do lifts affect warranties? Also do they hurt the engine or transmission
What do you guys do with the parts you removed? i.e. the TRD shocks and struts.
Ya id buy a set of rear take off shocks to replace my 2 year old rusty ones
@@RM..... people post their take off's on craigslist all the time.
by removing the sway bar it doesn't affected the performance?
Better off road. More body roll on road
When you say three inches, how many inches of threads are showing ? Do you do the case drop when going 3?
You guys only work on Toyotas? Just curious. Nice job and videos 👆
Looks good but the front looks low.
I want it done to my 18 Tundra...where you located? COST? Looks grand
Special balancing? Please explain
Love it
Does the body mount modification void any manufactures warranty’s?
How much do you guys charge for icon stage 8 installation with tires mounted as well?
That looks beefy‼️👍👊
Just picked up a new 2019 VooDoo Blue Tundra TRD Pro a week ago, if you guys were in the Northeastern US I'd have you guys work on my truck!
did you get work done to your truck? lifted- wheels. I have a 2021 voodoo. looking for ideas
@@iceman-ko6xi I’m still on my stock wheels but just on Nitto Grapplers in 285/70/18. Did the HP Tuners custom flash which improved the engines performance and throttle response.
@NYC-2-BKK thats cool. I'm getting my truck lifted 3" BDS, 17" method bronze wheels, 35" Recon grapplers. getting all installed in April. also getting Wescott rock sliders. I'm east coast too. I'm getting my work done at a place called No limit. in Baltimore. thanks for getting back to me.
@@iceman-ko6xi good luck with your mods. I’m sticking with the stock suspension since I need to be able to get into mall parking lots
I like it
Do you guys work on fords ? Or just Toyota’s
Did any one knows what is the price to lift a tundra like that? Thanx
nice set up but the reservoir looks awfully close to the uca.
That’s how they are supposed to be mounted. There’s only one way with the bracket and they aren’t too close. They will never hit each other.
88ROTORS 👌 good to know
Nice 👍🏾🔥
Allot of car videos have this music in the back ground
Next mod is putting on some fender flares
How much labor and part's cost?
Do you guys ever do any tundras with 33s
You got any tundra trd pro take offs? I wanna install those on my truck?
How much does a setup like that cost?
How much is all that package with labor. let me know pls👍
With the 3 inch lift do you have to chop the frame to fit 35s what if you do spacers or different size rim?
Yes, that’s why we did it. Spacers will make it rub even more. If you want your truck to perform properly with a 3” lift and 35’s then you’d have to get a chop done for full clearance with articulation.
Nice one:)
Nice, but not everyone wants a BMC and 35 tires.
What could be added to this exact setup for an extra inch or 2?
If you have a 4x4, then 3in is all you're going to get unless you go with a drop bracket kit. If you're 4x2 then I think you can add lift spindles.
88ROTORS why did you guys removed the rear sway bar?
Hits the leaf expansion pack.
Did all your prices on method wheels go up too?
It did everywhere as of June 1st. We still keep what we have in our inventory the same. We stock 800+ Methods.
Anyone in the Houston area that can do a reliable job like you guys? Any reccomendations?
duggy's garage
The Chanel 7
I have 6in lift can i install rearswaybar to it
it would need to be modified.
Can you say what the offset is for the wheels? I love this look
17x8.5 +0. Mentioned in the video and the item description also if you want to see more details. Thanks!
RApffy Tolfu actionman