{1116} FEELER Guage introduction and use
ฝัง
- เผยแพร่เมื่อ 18 พ.ค. 2024
- In this video number {1116} FEELER Guage introduction and use. I explained FG-32 feeler guage / thickness guage. it is used to measure gap width. its blades are marked with dual measurements in inches and millimeters
You are Invited to Join Haseeb Electronics
/ @haseebelectronics
Please check other videos
SMPS no output • {966} SMPS Is not work...
SMPS step by step repair tutorial • {528} How To Repair SM...
How to download circuit diagram, service manual • {558} How To Download ...
Transistor, IGBT, MOSFET equivalent • {233} How to find Equi...
Broken plastic gear repair • {679} How To Repair Br...
You can Follow me on :-
Instagram: / haseebelect
Facebook: web. profile.php?...
#feeler #thickness #guage #gap #measurement - วิทยาศาสตร์และเทคโนโลยี
Feeler guage was used to set gap on car engine spark plugs. In the past I used feeler guages to set the gap after cleaning the plugs and ran that same set of spark plugs for 15 years from new, cleaning every 3-5 years. Now my current car has spark plugs but they are inside the engine so now it requires dissassembly of the front of the engine to change the spark plugs.... at a cost of over $400... just to change the plugs!!!
wow
it is really great to know about your long time attachment with feeler guage.
@@HaseebElectronics Occasionally I used them at my job also. I worked as 1st Class Machinist on CNC machines. Some jobs had threads and special thread guages for tapered threads used in gas and oil industry was used with the feeler guage to check the gap between guage aand a square shoulder to know if the thread was cut correctly. The shoulder gap tolerance was +-0.050" which is when cutting thread +-0.002" on diameter.
Teşekkürler Eşref hocam.Hayır ve bereket dolu günler dilerim.
You are legend of electronic you are excellent sir haseeb,it is gift from God plus your kindness to share to other who want to learn electronic.thank you sir. by the way , I want to know what is the difference between vcc and vstr in ic please help us sir
❤❤
👍
Good day Haseeb, appreciate your tutorial videos which have encouraged me into DIY in basic electronics.
I have a Prag 10kva Servo voltage stabilizer with control board problem. The culprit is the mcu(SAS1011), the board is TL-P04MSV13 (available in the internet) but not much info about the mcu(pin-out/reliable seller) in the internet.
I need help in finding a replacement chip if possible.
Tried putting links but no success.
From Nigeria🇳🇬
To make an isolation transformer;
If I connect an 220v to 110v step down converter
and 110v to 220v step up converter bact to back(220-110-110-220),
can I have an isolation transformer to use on repairing faulty circuits and using osciloscope at non-isolated circuits?