Hiya Wes. Easy tip to remove the smell from the cab. Set the AC fan to manual so it stays running, keep any cab vents sealed, and put an ozone generator in the cab, 30 minutes to an hour with the doors closed should do the trick. After complete, just open all of he doors and let it sit for 20 minutes, the accumulated ozone is not the best for you and can make it hard to breath, so stay out of the cab for a little bit and just let it air out. That will remove any musty or cigarette smells and any funk that is growing in the AC unit as well as deodorize all fabric like the seats headliner etc. It will give it that new car smell, err new tractor smell?
Kiwi farmer breaks own world record with monster wheat crop... Guinness World Record for the highest wheat yield with a crop producing 17.398 tonnes per hectare. www.stuff.co.nz/business/farming/122074530/kiwi-farmer-breaks-own-world-record-with-monster-wheat-crop
Pleased to see you going from strength to strength 👍. A lovely tractor, may she serve you as well as the 7410 has and continues to. The corn looks really good. I hope it harvests as well as it looks for you.
You really know what a good tractor is . That 6210r is a nice machine. We have one on our farm they are nice for moving bales . That loader setup is very quick and rather problem free besides the welds that break we fixed ours last fall with Adding plates and gusets to the bad areas . Nice video stay safe and farm on my friends !
AAA+ Quigley, Hay Contracting. th-cam.com/video/NSUAS09aLaI/w-d-xo.html Jackson Hay - A slice of summer ; th-cam.com/video/qelT0hEoERk/w-d-xo.html . Canterbury Kiwi -2020 Harvest . th-cam.com/video/vHcg7nTDsxE/w-d-xo.html
Them H series loaders seem a damn strong loader. We have had two of them in the past 6 years and no complaints. Very easy to detach and attach. The 210Rs are 210 horsepower boosting to 240 under load or so. Harder you drive an R series the better it performs in my experience.
AA+ Quigley, Hay Contracting. th-cam.com/video/NSUAS09aLaI/w-d-xo.html Jackson Hay - A slice of summer ; th-cam.com/video/qelT0hEoERk/w-d-xo.html . Canterbury Kiwi -2020 Harvest . th-cam.com/video/vHcg7nTDsxE/w-d-xo.html
We have a 6140r loader tractor at work. Same issues with bucket cracking except it’s split across the bottom. Just had the same issue with cab pressure fan seat has to come out to replace it and they don’t actually fail they just get worn enough to be drawing a slight difference in amps to throw the stupid code. Good all round tractor just the electrics/computer and dpf are a guts ache.
I’ve got a 6150r with the same hvac code. A 6210r would have a 41 or so gpm hydro pump. They’re super speedy on loaders. You can get a big shaft 1000 rpm pto stub shaft through parts. 6190r’s and 6210’s can do that.
AAA+ Quigley, Hay Contracting. th-cam.com/video/NSUAS09aLaI/w-d-xo.html Jackson Hay - A slice of summer ; th-cam.com/video/qelT0hEoERk/w-d-xo.html . Canterbury Kiwi -2020 Harvest . th-cam.com/video/vHcg7nTDsxE/w-d-xo.html
AA+ Quigley, Hay Contracting. th-cam.com/video/NSUAS09aLaI/w-d-xo.html Jackson Hay - A slice of summer ; th-cam.com/video/qelT0hEoERk/w-d-xo.html . Canterbury Kiwi -2020 Harvest . th-cam.com/video/vHcg7nTDsxE/w-d-xo.html
Wes that is a nice tractor. Several of them around me and they seem to be holding up very well. You will be happy with the JD loader years from now. The aftermarket loaders are just "OK" at the best. They have to be more genaric as they have to "fit" many brands and models. So they often do not fit "right".
Kiwi farmer breaks own world record with monster wheat crop... Guinness World Record for the highest wheat yield with a crop producing 17.398 tonnes per hectare. www.stuff.co.nz/business/farming/122074530/kiwi-farmer-breaks-own-world-record-with-monster-wheat-crop
Only thing with the H series loaders is that handle to detach your bucket or Spears is absolutely junk. Your goons break spring in it and your gonna catch that handle on something and bend it. Don’t ask how I know
AAA+ Quigley, Hay Contracting. th-cam.com/video/NSUAS09aLaI/w-d-xo.html Jackson Hay - A slice of summer ; th-cam.com/video/qelT0hEoERk/w-d-xo.html . Canterbury Kiwi -2020 Harvest . th-cam.com/video/vHcg7nTDsxE/w-d-xo.html
AAA+ Quigley, Hay Contracting. th-cam.com/video/NSUAS09aLaI/w-d-xo.html Jackson Hay - A slice of summer ; th-cam.com/video/qelT0hEoERk/w-d-xo.html . Canterbury Kiwi -2020 Harvest . th-cam.com/video/vHcg7nTDsxE/w-d-xo.html
Awesome tractor! I am trying to talk my dad into getting a older 6020 series tractor with a cab and 4x4 instead of looking at either a 5425, 5525, or a 5625 because I saw a used 6220 with only 2900 hours for $34,000.
AAA+ Quigley, Hay Contracting. th-cam.com/video/NSUAS09aLaI/w-d-xo.html Jackson Hay - A slice of summer ; th-cam.com/video/qelT0hEoERk/w-d-xo.html . Canterbury Kiwi -2020 Harvest . th-cam.com/video/vHcg7nTDsxE/w-d-xo.html
Friendly advice. DO NOT engage park while the tractor is moving. It will brake. Also, when you put it in park, giv it a couple of second's to engage. I've hear of people having the tractor role away because the parking pal failed to engage or broke.
AAA+ Quigley, Hay Contracting. th-cam.com/video/NSUAS09aLaI/w-d-xo.html Jackson Hay - A slice of summer ; th-cam.com/video/qelT0hEoERk/w-d-xo.html . Canterbury Kiwi -2020 Harvest . th-cam.com/video/vHcg7nTDsxE/w-d-xo.html
This is a different league of tractor/loader than your previous [assuming you've sold it] Westerndorf. This has got the speed, the power, the reach, the convenience, the tractor has a proper shuttle and a foot throttle and the loader is probably much faster to attach and remove. Plus the Euro tool hitch is standard across the industry now more or less. No doubt you will find a massive increase in productivity and much less driver fatigue. The electric joystick and loader spools will be a giant massive step forward over the horrendous Westondorf valve mess. The bucket though is a typical large volume grain bucket, not meant for dense solids and certainly not soil or silage out of a clamp. It is not built for that kind of work. Not even if you plate it. The gauge of steel and general design is only meant for grain, while this loader should have a lift capacity of around three tons, which is enough to twist that bucket into a heap of scrap effortlessly.
@@brianmullins5824 not every engine is exactly the same :) wear parts too. i let our engines get a valve check up by experts every 1000 hrs. this cn save you alot of trouble.
That’s the euro 8 head stock on the loader. the best bracket on the market as you just crowd them head stock right down as hook into the bucket, forks etc with ease instead of trying to keep it level with like the skid steer or euro 3 or euro profi head stock
AAA+ Quigley, Hay Contracting. th-cam.com/video/NSUAS09aLaI/w-d-xo.html Jackson Hay - A slice of summer ; th-cam.com/video/qelT0hEoERk/w-d-xo.html . Canterbury Kiwi -2020 Harvest . th-cam.com/video/vHcg7nTDsxE/w-d-xo.html
while emitting 10x lung damaging toxic pollution............. then commit to lock-downs and horse-bull wearing of masks that do not protect against anything radioactive/other chemical/viral warfare :))) nevermind. is it above my paygrade or above all their bullshchat lies ;)
Government logic: grow corn 🌽 on a farm and transport it to the ethanol plant and turn it into corn ethanol to mix with gasoline to reduce emissions in gasoline powered cars and trucks. 1. 99% of everything on a farm used to grow corn and transport it to the ethanol plant is diesel powered and creates more emissions than gasoline powered vehicles. 2. It takes about 1.0 to 1.3 gallons of petroleum to make 1.0 gallon of corn ethanol,,,,,, and drumroll that gallon of corn ethanol has 67% of the BTU energy of a gallon of undiluted gasoline. 3. Gasoline and corn ethanol don’t mix well. For years in the 1990’s into the 2000’s you couldn’t buy gasoline in Minnesota that didn’t have at least 10% corn ethanol mixed in it. The Minnesota Street Rod Association went to the Minnesota legislature and complained about the ethanol ruining the gaskets in the carburetors in their classic cars and finally the Minnesota legislature agreed and allowed premium ethanol free gasoline to be sold in Minnesota. But it’s still a hassle because it’s usually about $1.00 per gallon more than regular 87 octane. Ethanol gasoline has caused lots of trouble with carburetors in lawn equipment so I buy non ethanol gasoline for them. I’ve been told that in Wisconsin they sell regular 87 octane non ethanol gasoline there at much more reasonable prices. I have 17, 5 & 6 gallon plastic gasoline cans so I should make a run into Wisconsin to buy some.
Thanks for another video excellent looking corn. You can never go wrong with a John Deere loader. Spend the money up front have something that lasts for a long time. Have a great day
Yea n if he does that mine as well send it to the city n away from the farm! Or jus take a lighted arrow n fill fuel tank n shoot it and u get all the light u want
looks like you got a pretty good tractor ,, i see the speed difference in the loader too ,, i went back and watched a couple old videos with the 8120 and it's way faster than the westendorf
It doesn't look like a european model with those rear axles, the cab and front axles are similar to what we have here. On the rear axles, we have those trumpets to bolt on the rims, if we want to change the width we swap the rims
Check your engine air box hasn’t warped, there’s a problem with 6r tractors at the moment we’re the air filter warp and the filters no longer seal therefore dusting your engine! Might save you a dollar!
I sure do miss your john deer H and still wanna see that john deer A get restored that is in the weeds that would be very fun winter project loven the loader footage
Hi Wes hope your well my friend .It looks like you have gone big into straw bailing .Its nice to see you doing so well . i don't have your number i would give you a ring . It would be nice to catch up .you take care .
AAA+ Quigley, Hay Contracting. th-cam.com/video/NSUAS09aLaI/w-d-xo.html Jackson Hay - A slice of summer ; th-cam.com/video/qelT0hEoERk/w-d-xo.html . Canterbury Kiwi -2020 Harvest . th-cam.com/video/vHcg7nTDsxE/w-d-xo.html
Does tall corn take more nutrients from corn ears to make taller stock and leaves and runing all that material through the rollers to remove ears of corn create a mess
Wes you don't even have to delete the dpf on the tractor you can get a tune that you can get 270 HP out of the 6.8L engine and be the same as the 7R 270 tractor
I had a 6110 with all of the bells and whistles. Smooth, quiet, comfortable. GREAT machine !! Enjoy !
Hiya Wes. Easy tip to remove the smell from the cab. Set the AC fan to manual so it stays running, keep any cab vents sealed, and put an ozone generator in the cab, 30 minutes to an hour with the doors closed should do the trick. After complete, just open all of he doors and let it sit for 20 minutes, the accumulated ozone is not the best for you and can make it hard to breath, so stay out of the cab for a little bit and just let it air out. That will remove any musty or cigarette smells and any funk that is growing in the AC unit as well as deodorize all fabric like the seats headliner etc. It will give it that new car smell, err new tractor smell?
Nice tractor Wes tinted windows are awesome for keeping the cab cooler good addition to the farm and I sure your Dad will grow to love it
Real nice tractor Wes.... hope she serves you well 👌👍😊
Kiwi farmer breaks own world record with monster wheat crop...
Guinness World Record for the highest wheat yield with a crop producing 17.398 tonnes per hectare.
www.stuff.co.nz/business/farming/122074530/kiwi-farmer-breaks-own-world-record-with-monster-wheat-crop
Nice tractor! You deserve it! Can't wait to see it in more videos!
Hope your Dad is feeling better, and when he's well enough loves running it!
Pleased to see you going from strength to strength 👍.
A lovely tractor, may she serve you as well as the 7410 has and continues to.
The corn looks really good. I hope it harvests as well as it looks for you.
You really know what a good tractor is . That 6210r is a nice machine. We have one on our farm they are nice for moving bales . That loader setup is very quick and rather problem free besides the welds that break we fixed ours last fall with Adding plates and gusets to the bad areas . Nice video stay safe and farm on my friends !
I can't believe you hit the spreader with the bucket you friggen noob! :P Nice addition!
The first R-Series John Deere on your Farm! Congratulations, Wes!
I hope you'll have good luck with it!
Great looking tractor Wes and You seem to be very happy with it so that is what counts the most.
You sure know your JD history. Many don’t know about the paint. Nice tractor 👍👍
Love new 6210R. I have the 6170M, awesome tractor and loader.
AAA+ Quigley, Hay Contracting.
th-cam.com/video/NSUAS09aLaI/w-d-xo.html
Jackson Hay - A slice of summer ;
th-cam.com/video/qelT0hEoERk/w-d-xo.html .
Canterbury Kiwi -2020 Harvest .
th-cam.com/video/vHcg7nTDsxE/w-d-xo.html
Them H series loaders seem a damn strong loader. We have had two of them in the past 6 years and no complaints. Very easy to detach and attach. The 210Rs are 210 horsepower boosting to 240 under load or so. Harder you drive an R series the better it performs in my experience.
AA+ Quigley, Hay Contracting.
th-cam.com/video/NSUAS09aLaI/w-d-xo.html
Jackson Hay - A slice of summer ;
th-cam.com/video/qelT0hEoERk/w-d-xo.html .
Canterbury Kiwi -2020 Harvest .
th-cam.com/video/vHcg7nTDsxE/w-d-xo.html
We have a 6140r loader tractor at work. Same issues with bucket cracking except it’s split across the bottom. Just had the same issue with cab pressure fan seat has to come out to replace it and they don’t actually fail they just get worn enough to be drawing a slight difference in amps to throw the stupid code. Good all round tractor just the electrics/computer and dpf are a guts ache.
Looking nice there, glad you found one your dad loves driving to
Love electric controls for the loader . Took a little bit to get use to the sensitivity of it but once you get the hang of it , it’s slick as snot
Wes that is one fine tractor & your corn looks wonderful.
Nice 6210 tractor Wes thanks for sharing buddy
I’ve got a 6150r with the same hvac code. A 6210r would have a 41 or so gpm hydro pump. They’re super speedy on loaders. You can get a big shaft 1000 rpm pto stub shaft through parts. 6190r’s and 6210’s can do that.
AAA+ Quigley, Hay Contracting.
th-cam.com/video/NSUAS09aLaI/w-d-xo.html
Jackson Hay - A slice of summer ;
th-cam.com/video/qelT0hEoERk/w-d-xo.html .
Canterbury Kiwi -2020 Harvest .
th-cam.com/video/vHcg7nTDsxE/w-d-xo.html
Tint definitely helps with the heat
A lot of tractors in Texas have tinted glass , including city and Txdot tractors.
That’s a sharp looking tractor Wes. Should serve you very well into the future.
AA+ Quigley, Hay Contracting.
th-cam.com/video/NSUAS09aLaI/w-d-xo.html
Jackson Hay - A slice of summer ;
th-cam.com/video/qelT0hEoERk/w-d-xo.html .
Canterbury Kiwi -2020 Harvest .
th-cam.com/video/vHcg7nTDsxE/w-d-xo.html
Wes that is a nice tractor. Several of them around me and they seem to be holding up very well. You will be happy with the JD loader years from now. The aftermarket loaders are just "OK" at the best. They have to be more genaric as they have to "fit" many brands and models. So they often do not fit "right".
The Quickie is the better loader with no compromises, but not significantly so compared to this and newer generations of JD loaders.
lol
Kiwi farmer breaks own world record with monster wheat crop...
Guinness World Record for the highest wheat yield with a crop producing 17.398 tonnes per hectare.
www.stuff.co.nz/business/farming/122074530/kiwi-farmer-breaks-own-world-record-with-monster-wheat-crop
I like that double top arm. You're right about the bucket mount.
Only thing with the H series loaders is that handle to detach your bucket or Spears is absolutely junk. Your goons break spring in it and your gonna catch that handle on something and bend it. Don’t ask how I know
Nice looking tractor Wes.
AAA+ Quigley, Hay Contracting.
th-cam.com/video/NSUAS09aLaI/w-d-xo.html
Jackson Hay - A slice of summer ;
th-cam.com/video/qelT0hEoERk/w-d-xo.html .
Canterbury Kiwi -2020 Harvest .
th-cam.com/video/vHcg7nTDsxE/w-d-xo.html
That's an awesome drive system that works great for loading applications or grading if you decide to put a blade on the back
Nice Johny.
Great purchase.
The glass tan is actually pretty freaking cool.
It makes him look kinda meaner!
Give it a good buffing and she'll look even better!
AAA+ Quigley, Hay Contracting.
th-cam.com/video/NSUAS09aLaI/w-d-xo.html
Jackson Hay - A slice of summer ;
th-cam.com/video/qelT0hEoERk/w-d-xo.html .
Canterbury Kiwi -2020 Harvest .
th-cam.com/video/vHcg7nTDsxE/w-d-xo.html
Awesome tractor! I am trying to talk my dad into getting a older 6020 series tractor with a cab and 4x4 instead of looking at either a 5425, 5525, or a 5625 because I saw a used 6220 with only 2900 hours for $34,000.
Nice addition to the fleet, great video Wes!
Awesome looking bit of kit. 👌
AAA+ Quigley, Hay Contracting.
th-cam.com/video/NSUAS09aLaI/w-d-xo.html
Jackson Hay - A slice of summer ;
th-cam.com/video/qelT0hEoERk/w-d-xo.html .
Canterbury Kiwi -2020 Harvest .
th-cam.com/video/vHcg7nTDsxE/w-d-xo.html
Build some wall extensions on that spreader. Flare out the ends so it fits your bucket.
Wes, that's is one sexy tractor. Hope it gives you years of service.
Friendly advice. DO NOT engage park while the tractor is moving. It will brake. Also, when you put it in park, giv it a couple of second's to engage. I've hear of people having the tractor role away because the parking pal failed to engage or broke.
At work we spray with a 6210R and sofar with great satisfaction , although I miss the previous 6830.
AAA+ Quigley, Hay Contracting.
th-cam.com/video/NSUAS09aLaI/w-d-xo.html
Jackson Hay - A slice of summer ;
th-cam.com/video/qelT0hEoERk/w-d-xo.html .
Canterbury Kiwi -2020 Harvest .
th-cam.com/video/vHcg7nTDsxE/w-d-xo.html
Looks like a small storm is gonna try n eat some of your super corn
Treat that quick loader hydro disconnect very nicely ,, it’s easy to get it a bit crooked and break the seals..
Nice looking rig. Looks brand new.
This is a different league of tractor/loader than your previous [assuming you've sold it] Westerndorf. This has got the speed, the power, the reach, the convenience, the tractor has a proper shuttle and a foot throttle and the loader is probably much faster to attach and remove. Plus the Euro tool hitch is standard across the industry now more or less. No doubt you will find a massive increase in productivity and much less driver fatigue. The electric joystick and loader spools will be a giant massive step forward over the horrendous Westondorf valve mess.
The bucket though is a typical large volume grain bucket, not meant for dense solids and certainly not soil or silage out of a clamp. It is not built for that kind of work. Not even if you plate it. The gauge of steel and general design is only meant for grain, while this loader should have a lift capacity of around three tons, which is enough to twist that bucket into a heap of scrap effortlessly.
One thing I can tell you about those engines is you need to adjust valve clearence in time. that is one weak point of the machine.
Nice Video!
Don't think you need to tell Wes anything about John Deere engine's,just saying.
@@brianmullins5824 not every engine is exactly the same :) wear parts too. i let our engines get a valve check up by experts every 1000 hrs. this cn save you alot of trouble.
@flyhound97 well said, couldn't agree more.
@flyhound97 Now now! Leaver HER out of this!!! LOL! ;
@flyhound97 idc... English isn't my native language. As long as you can actually understand what i type down it ok to me😅
Need some fuzzy dice in the window!
Ho wow love the new tractor West .
I love your tell it as it is approach to life. 👌
We had a peterbuilt at my work with the filter. We put header wrap all the way to the filter never had a problem after that.
Can someone put a payable hay load on a rig..@ 2.38...th-cam.com/video/y7n013_tTXQ/w-d-xo.html
Compressors usually cycle on and off as needed. Not sure how farm equipment works tho
That’s the euro 8 head stock on the loader. the best bracket on the market as you just crowd them head stock right down as hook into the bucket, forks etc with ease instead of trying to keep it level with like the skid steer or euro 3 or euro profi head stock
Can someone put a payable hay load on a rig..@ 2.38...th-cam.com/video/y7n013_tTXQ/w-d-xo.html
I have a 6140r whit the same loader. Overall great tracktor, it have directdrive transmission.
AAA+ Quigley, Hay Contracting.
th-cam.com/video/NSUAS09aLaI/w-d-xo.html
Jackson Hay - A slice of summer ;
th-cam.com/video/qelT0hEoERk/w-d-xo.html .
Canterbury Kiwi -2020 Harvest .
th-cam.com/video/vHcg7nTDsxE/w-d-xo.html
I watch your videos hi Tim Etc.
From Chad Minnesota
Government logic-burn more fuel to make the air cleaner
while emitting 10x lung damaging toxic pollution............. then commit to lock-downs and horse-bull wearing of masks that do not protect against anything radioactive/other chemical/viral warfare :)))
nevermind. is it above my paygrade or above all their bullshchat lies ;)
@@drcornelius8275 no we're not dumbass. Oh wait science escapes you.
Government logic: grow corn 🌽 on a farm and transport it to the ethanol plant and turn it into corn ethanol to mix with gasoline to reduce emissions in gasoline powered cars and trucks.
1. 99% of everything on a farm used to grow corn and transport it to the ethanol plant is diesel powered and creates more emissions than gasoline powered vehicles.
2. It takes about 1.0 to 1.3 gallons of petroleum to make 1.0 gallon of corn ethanol,,,,,, and drumroll that gallon of corn ethanol has 67% of the BTU energy of a gallon of undiluted gasoline.
3. Gasoline and corn ethanol don’t mix well.
For years in the 1990’s into the 2000’s you couldn’t buy gasoline in Minnesota that didn’t have at least 10% corn ethanol mixed in it. The Minnesota Street Rod Association went to the Minnesota legislature and complained about the ethanol ruining the gaskets in the carburetors in their classic cars and finally the Minnesota legislature agreed and allowed premium ethanol free gasoline to be sold in Minnesota. But it’s still a hassle because it’s usually about $1.00 per gallon more than regular 87 octane. Ethanol gasoline has caused lots of trouble with carburetors in lawn equipment so I buy non ethanol gasoline for them. I’ve been told that in Wisconsin they sell regular 87 octane non ethanol gasoline there at much more reasonable prices. I have 17, 5 & 6 gallon plastic gasoline cans so I should make a run into Wisconsin to buy some.
Last John Deere I worked with was a hand start twin that belonged to a friend of mine. Steel wheels.
6r’s are a great range 👌🏻
Crazy stuff. That tractor spent some time at quality Equipment where I work.
It was only at the Quality Deer in Wilson for a couple days
Nice best of luck with her
Nice tractor Wes
Really nice great job as usual
I like the new machine. I’d love to have it for use at my place, it wouldn’t get the use you’ll get out of it.
I was amazed at the difference a mirrored shaded full face visor made on my motorcycle helmet for heat.
Ah, dpf’s. The bane of my life.
Diesel Pollution Fumming ( aka it toxic gasses the planet or inhabitants nearby)
Good for you Wes👍
Very nice video, thank you.
Nice tractor Wes.. Take care sir..
Thanks for another video excellent looking corn. You can never go wrong with a John Deere loader. Spend the money up front have something that lasts for a long time. Have a great day
Nice tractor. Tinted windows is definitely a plus. I also spied a bronco sitting there 🤔🤔 what's up with that
LOL...I notice things like that as well.
That’s OJ’s bronco
@@circlesfarms his was white 😂
Its mine at grant_kingston_12 on Instagram
Can someone put a payable hay load on a rig..@ 2.38...th-cam.com/video/y7n013_tTXQ/w-d-xo.html
nice looking tractor Wes!
Put spinners on the wheels and lights underneath that pulse to the bass speakers you must install under the cab floor.
And some rap music too
🤣😂🤣😂🤣😂🤣
Yea n if he does that mine as well send it to the city n away from the farm! Or jus take a lighted arrow n fill fuel tank n shoot it and u get all the light u want
I bet ya missing that lil skid steer Wes? I remember you saying it’s ideal for this job in that shed to get at the product.
looks like you got a pretty good tractor ,, i see the speed difference in the loader too ,, i went back and watched a couple old videos with the 8120 and it's way faster than the westendorf
Nice machine.
It doesn't look like a european model with those rear axles, the cab and front axles are similar to what we have here. On the rear axles, we have those trumpets to bolt on the rims, if we want to change the width we swap the rims
Very nice. Well done
Check your engine air box hasn’t warped, there’s a problem with 6r tractors at the moment we’re the air filter warp and the filters no longer seal therefore dusting your engine! Might save you a dollar!
I sure do miss your john deer H and still wanna see that john deer A get restored that is in the weeds that would be very fun winter project loven the loader footage
Got to have the case IH drain ...... dont want it getting all bound up when one gets in the way and has to be eaten
What do you hope your winter projects will be?
My god look at the height of that corn 🌽 😳
Past the proverbial elephants arsehole..
Looking more like a pine plantation than a corn field
Nice tractors and that would be good improvement on the loader the way it look lightly built
That tint suits it.
Thanks for the walk around Wesley! Been waiting for it . Now ya got 1 more to go lol , can ya do Cody’s tractor next ? Please .. that would be great 😁
Nice tractor!
Hi Wes hope your well my friend .It looks like you have gone big into straw bailing .Its nice to see you doing so well . i don't have your number i would give you a ring . It would be nice to catch up .you take care .
I’ll have to get you my number I’d love to chat a while. My email is onelonlyfarmer@yahoo.com. If you send me an email I’ll send you my number
Nice ride Wes.
I love it Wes you did good
nice tractor wes
Very nice.
Deere god, thats a nice tractor
It isn't blue, but never the less 👍👍
6210r vs 7930 ? Which one do you think is better
Nice tractor and video
Wes - nice tractor review !
Bkt tyres front love them cheap and good
AAA+ Quigley, Hay Contracting.
th-cam.com/video/NSUAS09aLaI/w-d-xo.html
Jackson Hay - A slice of summer ;
th-cam.com/video/qelT0hEoERk/w-d-xo.html .
Canterbury Kiwi -2020 Harvest .
th-cam.com/video/vHcg7nTDsxE/w-d-xo.html
Does tall corn take more nutrients from corn ears to make taller stock and leaves and runing all that material through the rollers to remove ears of corn create a mess
Wes you don't even have to delete the dpf on the tractor you can get a tune that you can get 270 HP out of the 6.8L engine and be the same as the 7R 270 tractor
Can someone put a payable hay load on a rig..@ 2.38...th-cam.com/video/y7n013_tTXQ/w-d-xo.html
Wow, nice tractor !
Good video
Where did you get it from Wes or have I missed that video
the height of that corn
I see what you did there. diangle loading. Lil wider.
Have you had good luck those BKTs? I have a set of Galaxys on my 7120 Magnum, good price point on them and they seem to be becoming more popular.
We have the same loader on a 6930 , it's really well built, but kinda blocks the view sometimes
Can you make a video on the allis chalmer garden tractor