I get 03 code battery overvolt. When switch off light breaker it's back to normal. Is used 10amp breakers for live one and neutral one to the lights in the house.
Found the error. When my eskom power is on somehow the way cables is connected some volts go back to my inverter. Luckily it did not blow my inverter. Must inverter is very safe. My ECCO does not give any error warnings.
Same problem. Error 04 on Must inverter. Tested my 8s 24v Lifepo4 bat. 90% SOC on load near 2500-2800 Wt and invertor showed f 04. By manual it means, that battery voltage low... Voltage was droped from 26.8 to 25.6 volts under load. Cut off volrage set at 23.5v. Strange, becouse teoreticaly my 200 Ah 5 kWt battery can produce up to 200 Amps and invertor takse only 125 Amps on max load. At 2kWt and lower- no problem. What can couse the error? Bad wire connection, pure contact at DC circuit braker?
Had this issue today but after watching this video I tried it and it worked
Thank you so much
thanks for this! i had a 06 error and this also worked!
Thanks. Worked for me this morning.
Glad it helped
That’s good to hear
I get 03 code battery overvolt. When switch off light breaker it's back to normal. Is used 10amp breakers for live one and neutral one to the lights in the house.
Found the error. When my eskom power is on somehow the way cables is connected some volts go back to my inverter. Luckily it did not blow my inverter. Must inverter is very safe. My ECCO does not give any error warnings.
Thank you dude. I'm gonna try it now 👌🏻
Has it worked?
The 04 code just keeps beeping so I switched everything off as you've said I am waiting for 5 minutes I hope it works
Same problem. Error 04 on Must inverter. Tested my 8s 24v Lifepo4 bat. 90% SOC on load near 2500-2800 Wt and invertor showed f 04. By manual it means, that battery voltage low... Voltage was droped from 26.8 to 25.6 volts under load. Cut off volrage set at 23.5v. Strange, becouse teoreticaly my 200 Ah 5 kWt battery can produce up to 200 Amps and invertor takse only 125 Amps on max load.
At 2kWt and lower- no problem. What can couse the error? Bad wire connection, pure contact at DC circuit braker?
Bad wiring ... Make sure wires from the charge controller to your batteries are well connected in the right manner and torque properly
hello, what does the code actually mean? i just had this error and I'm not sure why it happened, i know for sure my battery's are fully charged
Hi, were you able to find out more information?
Error code 04 is all about frequency
Fault 10?
How do you fix error 37 code
Thanks Bruh
Much welcome.
I did same thing and now I’m seeing fault 03
Make sure you try this procedure when the sun is at its peak. Let's see the result
Bro my inverter has been beeping and blinking
My battery had 13.1 volts but I still got 04 error
What causes the 04?
Drained out battery