I do this for a living. Instead of pealing the sticker off the backing paper, do it the other way. Keep the sticker/app tape flat, and peel the backing paper back. Also, peeling it only a small amount first and folding the backing paper, like a couple of inches, you can get better placement, stick down what is exposed, and peel an inch or so at a time, getting all the air out. Also, if its a large sticker, on pretty much anything (not painted walls, paper or wood, but glass, metal, plastic, foamex etc) you can spray a small amount of water mixed with a minute amount of washing up soap, it helped the air escape and gives a clear finish on the glue.
Absolutely agree with this. It's also a good idea to align the whole decal and tape it in place with masking tape down the centre, BEFORE peeling back the backing paper. Once taped in place, you can lift the left or right side of the whole decal up and in towards the centre line, peel off that half of the backing paper and either fold it back flat or trim it off with scissors, before applying that half of the decal to the object. Once the first half is on, simply remove the centre tape, peel back the other half of the backing paper and fit the second half of the decal. This will ensure that the decal is always fitted in the correct place as it's a nightmare trying to align a sticky backed decal to an object without it accidentally touching (and sticking to) the object.
Thanks for making this short precise n well explained video Shannon! I was just trying to explain via text how to apply a vinyl word to my brother n decided I’d try n find him a video that would actually show him how to do it n happened upon yours n it’s perfect‼️ Thank you for sharing this with us❣️😊💜
Hi Shannon, thanks so much for your guidance. Some bits on mine were a bit stuck even after going back and forth. I used the microwave for 10 seconds and worked!
Just watched your excellent video (above) and I also just painted a wall today. How long will it take before I can put a decal on that wall? Does it matter? (I'm not planning on taking the decal off, ever.) Thanks, Troy
Hi Hun I've been watching you and your decals and I have a question? So you make and sell custom vinyl's because I am a artist but I never have used any vinyl transfered and I know you do a amazing job ? I so much hope you do custom vinyls and most of all see my comment ? 👍❤️🙏
Nice tutorial. I'm looking to splice 2 decals (mountain ranges). Should I cut & splice them with the backing still on, tape both pieces (front and back) then apply as normal as if it was always one piece? Thx :)
Thanks so much for all you share. I would be interested to know what machine you use for making your stencils and vinyl transfers. I've debated for years and since I want to be able to use my own choice of pictures and fonts I've not been sure which machine to purchase. What is your choice?0000
Hi Shannon, was wondering how to get a message to you without going through your Etsy shop? It has to do with Christmas ornaments. (I ordered from you back in July but this is not about that order). Thanks
I have a question on the transfer tape. Which kind do u use and is there any that you would recommend for someone starting out. I went with your suggestion on a video before of the light brown lining paper from Walmart but it's hard sometimes to get your stencil straight and apply to other surfaces. Any suggestions on a budget?
I am answered the transfer tape in next weeks Quick Tip Video :) The contact paper stencils are most inexpensive, but you do take on the issue of not being able to use transfer tape with those. Try oracal 631 - it's not that expensive (you do have to order it) but you can use transfer tape with it for easier application.
Thank you for your great videos. I love your channel. I was wondering if you can distress the transfer after you have applied it or would you create a stencil instead with your Cameo?
Is there a paint you recommend. Every time I try to apply a decal some of my paint comes up with transfer. I am using exterior paint, thinking it would be a good choice?
I love this! I have been a crafter for a long time but just now getting into vinyl. Should you seal your vinyl with anything, especially when working with wood? Thank you so much!
I just love your projects. So much so you have inspired me to want to buy tools for wood work. But I’d like to know what stenciling machine (if its called that) should I get?
Thanks for your help! The directions that came with my decal were so confusing. You made it simple
I do this for a living. Instead of pealing the sticker off the backing paper, do it the other way. Keep the sticker/app tape flat, and peel the backing paper back. Also, peeling it only a small amount first and folding the backing paper, like a couple of inches, you can get better placement, stick down what is exposed, and peel an inch or so at a time, getting all the air out.
Also, if its a large sticker, on pretty much anything (not painted walls, paper or wood, but glass, metal, plastic, foamex etc) you can spray a small amount of water mixed with a minute amount of washing up soap, it helped the air escape and gives a clear finish on the glue.
Absolutely agree with this. It's also a good idea to align the whole decal and tape it in place with masking tape down the centre, BEFORE peeling back the backing paper.
Once taped in place, you can lift the left or right side of the whole decal up and in towards the centre line, peel off that half of the backing paper and either fold it back flat or trim it off with scissors, before applying that half of the decal to the object. Once the first half is on, simply remove the centre tape, peel back the other half of the backing paper and fit the second half of the decal. This will ensure that the decal is always fitted in the correct place as it's a nightmare trying to align a sticky backed decal to an object without it accidentally touching (and sticking to) the object.
Thanks for making this short precise n well explained video Shannon! I was just trying to explain via text how to apply a vinyl word to my brother n decided I’d try n find him a video that would actually show him how to do it n happened upon yours n it’s perfect‼️ Thank you for sharing this with us❣️😊💜
I like how you gave out other things you can use if you didn't have something. Not many TH-camrs do that. Thank you
Hi Shannon, thanks so much for your guidance. Some bits on mine were a bit stuck even after going back and forth. I used the microwave for 10 seconds and worked!
Use hair dryer. It keeps what's on stuck and releases the rest! Pros use heat gun!
Just watched your excellent video (above) and I also just painted a wall today. How long will it take before I can put a decal on that wall? Does it matter? (I'm not planning on taking the decal off, ever.) Thanks, Troy
Thank you! This has been so helpful to me
This helped me get the "PUSH" decal onto my video doorbell button; thanks!
Mine just sticks to the transfer paper and will not come off
Thanks for the helpful video
Can you apply it to metal that is spray painted??? 😊.
Omg I got it, she's smart ,
I have the hardest time getting a perfect stick to my object. Ty for sharing.
Hi Hun I've been watching you and your decals and I have a question? So you make and sell custom vinyl's because I am a artist but I never have used any vinyl transfered and I know you do a amazing job ? I so much hope you do custom vinyls and most of all see my comment ? 👍❤️🙏
Thanks! Can I apply a decal and leave the transfer sheet/film on there with the vinyl sticker overnight? Or do I have to apply & remove immediately?
Thankyou very much young lady 👍😊
Thank you for the help!!!
Nice tutorial. I'm looking to splice 2 decals (mountain ranges). Should I cut & splice them with the backing still on, tape both pieces (front and back) then apply as normal as if it was always one piece? Thx :)
What happens if I dont have a plastic sheet on top of it? Mine came with just a liner on the bottom and the decal stuck to it
Do you need to seal it??
Good vid, nice woman..
Clear, and precise
Thank you! Yay🤗
How do I go about applying my vinyl decal to the bottom of a see through container so that it can be read when looking through the container?
Same process, but flip (mirror) the design before you cut it, so that it reads correctly from the inside rather than the outside.
Hi there...what do you do if the letters won't come off the wax paper onto the tape? Tried multiple
times and only 1/3 of a letter sticks.
Thank you!!
Thanks so much for all you share. I would be interested to know what machine you use for making your stencils and vinyl transfers. I've debated for years and since I want to be able to use my own choice of pictures and fonts I've not been sure which machine to purchase. What is your choice?0000
I use a silhouette Cameo 3, LOVE IT!
Do you use any poly type deal to protect the wood?
Do you use a certain sealer after transfer? If which one?
How do you seal them?
Thanks this helped a lot
Can you spray a clear spray so it can be permanent?
Thats a gooden Shannon
On what paper you print that text?
Thanks for the video! Question - what paints did you use on the wood? I love the colors!
I use Waverly brand chalk paint for more everything. White and "ink" I believe is the black. Love the "plaster" color too
is the decal removable after you apply it to wood?
Can i use vinyl decals on primed MDF wood? After sticking vinyl decals should i apply clear on /varnish ??
Thanks.
I tried a smooth bamboo cutting board and it won't stick could it be to shinny ?
Can it be applied to surfaces that aren't flat?
Thank you for this video. My question is should you put a clear coat of something on top or just leave it as is. Happy Tuesday and thank you.
I also just leave it. If it's going outside in the weather, than i would for sure clear spray it
Thank you for the quick reply
If you do put a clear spray on your wood, would you do it before applying the vinyl or after, because I'm afraid of the vinyl lifting?
Hi Shannon, was wondering how to get a message to you without going through your Etsy shop? It has to do with Christmas ornaments. (I ordered from you back in July but this is not about that order). Thanks
do you know if vinyl decal will stick to a PBE like keyboard keycaps?
Mine is sticking to the white backing
so is mine..1/3 of first letter stuck to tape only.. pressed it multiple times..no luck:(
Thank you!
Thank you
How could I buy from your website
I love it, how much is the decal?
This one is $4
How long does it take to get an order.
thanks my last decal stuck to the backing paper and I didnt know why
Is it better to apply the decal to a chalk paint that’s more “rough” finish or a paint that’s more of a satin finish?
How is your Etsy shop listed? I looked for The Daily Diyer with no results. Thanks!
CrossinMyHeart.com There is also a link in the description box
The Daily DIYer, thanks! I'm watching on my phone so don't always see things mentioned as being "down below"! I'll check it out!
Its like a dry transfer decal i use in my gundam
I have a question on the transfer tape. Which kind do u use and is there any that you would recommend for someone starting out. I went with your suggestion on a video before of the light brown lining paper from Walmart but it's hard sometimes to get your stencil straight and apply to other surfaces. Any suggestions on a budget?
I am answered the transfer tape in next weeks Quick Tip Video :) The contact paper stencils are most inexpensive, but you do take on the issue of not being able to use transfer tape with those. Try oracal 631 - it's not that expensive (you do have to order it) but you can use transfer tape with it for easier application.
Thank you for your great videos. I love your channel. I was wondering if you can distress the transfer after you have applied it or would you create a stencil instead with your Cameo?
How do I remove a decal that went on crooked because now it's all stuck crooked
Slowly, maybe a little heat from a hair dryer would be helpful too
Do you apply mod podge after to ensure longevity?
No you don’t need to
I am having a hard time for my decal to stick to the wooden frame
What printer do you used? Need laser printer?
I used a Silhouette
Thank you for sharing...🌻🌻🌻
Is there a paint you recommend. Every time I try to apply a decal some of my paint comes up with transfer. I am using exterior paint, thinking it would be a good choice?
You probably aren't prepping the surface well enough before painting OR you aren't waiting long enough after painting for the paint to cure.
Nice
I love this! I have been a crafter for a long time but just now getting into vinyl. Should you seal your vinyl with anything, especially when working with wood? Thank you so much!
Was wondering the same thing.
A thin layer of Mod Podge is ideal and what most crafters use.
I need this so much! Thank you!!!!
I just love your projects. So much so you have inspired me to want to buy tools for wood work. But I’d like to know what stenciling machine (if its called that) should I get?
What type of vinyl can I use on a chalkboard
I use Oracal 651 - use 631 if you want to be able to remove it
What vinyl did you use?
Oracal 651
🦋
Thank you so much, I was afraid to apply my decals.
❤️
Love the vid, it sure makes me not so apprehensive to attempt this. I'll say it again, that beautiful hair n color, ut engulfs your pretty face
You are so sweet, thank you. Glad this video could help you!
Please make a stencil "Home sweet Hogar"
👍👍👍😉
Thank you!! Bought a sticker off of Etsy and almost died because I couldn’t figure it out!🤍🤍
Me too