I gotta tell ya, this is the most no-nonsense tutorial I've ever seen. just a simple step by step for a layperson like me. amazing job 10/10 if my bike starts today it'll be because of your help.
I think it's awesome that you help others by sharing your experience and knowledge. Thanks so much for taking time out of your day to make this video, and any others you make.
Everything went smooth until trying to put the carb back on. I don’t understand how to get the left side in.. it’s impossible to get it to fit inside the rubber. What am I doing wrong? I’m this video he does it in a matter of seconds. I tried to copy each movement and it just doesn’t fit
The screws on the bike are not actually Phillips. They are JIS, (Japanese Industrial Standard). That is why they strip easy. The taper is a bit different. You can get away with using a JIS screwdriver on a Phillips screw, but not the other way around.
Hello, can you tell my what Model carb it is, a Mikuni? If, which one a Bst, VM.., TM.. what number, size? Sb put a different one in the bike we baught, no idea which but we might wanna go back to the original one, if I can find out which one it is. Thanks a lot, great video!
Hey man I have the same bike and I was trying to find a new carburetor for it but all the ones on eBay only have a spot for the one cable I don't know 🤔
Hi Mate, A question; At 21:00 the needle you have,I was about to remove the needle and it dropped off from my hand,it has some rings/shims,now I dont know how to put it back :( There are 3 rings/shims,I dont know which where it goes?Do the shims go on the bottom of the needle or on top? Coud you help please?
Just Me don't really understand what you're saying but go look at Yamaha parts warehouse and look up your model at the steamatic diagram, did you drop it on the floor or did it came apart don't understand what you're saying
99neworleans Sorry about my english. I found this,and my question is pretty much the same. www.xt225.com/forums/ubbthreads.php?ubb=showflat&Number=45681&page=1
Hi, im a big fan and thank you for the videos, they re very helpful, i need a favour, i need to get a complete rear disk break unit for my Yamaha Serrow 225. Can u help me with it, names and brands cz mine was lost by the machanic few years ago
Gracias por su enseñanza profesor pero quiero saber por qué pasa por el reboso del carburador de la XT 225 Yamaha de codigo 4VW-14901-10 CARBURADOR COMPLETO 1 gracias
I gotta tell ya, this is the most no-nonsense tutorial I've ever seen. just a simple step by step for a layperson like me. amazing job 10/10 if my bike starts today it'll be because of your help.
This video has been incredibly helpful and I would never have gotten my carb out without it
Thanks mate, rebuilt my carb today. This video was a real lifesaver. I wish the bloke who rebuilt it before me had watched your video also.
Wow! Thanks! This was so well done and so clear. You’re a stand up dude for making this.
Thanks buddy, just tore into mine, cleaned it out, and got it all back together. I could not have done this without your video. Thanks a million!
I think it's awesome that you help others by sharing your experience and knowledge. Thanks so much for taking time out of your day to make this video, and any others you make.
thanking you from the UK .......... the best detailed and explanatory video i've come across and really helped me rgds Pete
I'm surprised this doesn't have more votes... This is going to save me hours. Thanks for taking your time to make this, it's very helpful.
You do good work. Saved me time being bent over destroying my back trying to figure out how the fuck the choke cable disconnects
Thank you. These are easy to work on once you get the damned thing off. I think getting it back on is worse. Thanks again and love the accent.
These are the best bikes , tough ,fast(somewhat fast for the size) comfortable reliable not bad looking.
Had to take some Dramamine to finish watching your video!! Very informative
Great video...REALLY helped me to clean my carb.. THANK YOU
Thanks for walking through that. Got it done!
Thanks so much for taking time to make this video!!!!!
Everything went smooth until trying to put the carb back on. I don’t understand how to get the left side in.. it’s impossible to get it to fit inside the rubber. What am I doing wrong? I’m this video he does it in a matter of seconds. I tried to copy each movement and it just doesn’t fit
Dude your accent is awesome, good video too.
Brilliant, thank you. My bike is running well sweet now.
Thanks for the video it has really helped me.
Where did you source out the replacement hex screws? Would love to do that on my rebuild
The screws on the bike are not actually Phillips. They are JIS, (Japanese Industrial Standard). That is why they strip easy. The taper is a bit different. You can get away with using a JIS screwdriver on a Phillips screw, but not the other way around.
Very good video.Very helpful.
IM GETTING DIZZY,BUT GREAT INFO
Hello, can you tell my what Model carb it is, a Mikuni? If, which one a Bst, VM.., TM.. what number, size? Sb put a different one in the bike we baught, no idea which but we might wanna go back to the original one, if I can find out which one it is. Thanks a lot, great video!
MIKUNI BST34
Hey man I have the same bike and I was trying to find a new carburetor for it but all the ones on eBay only have a spot for the one cable I don't know 🤔
Just clean the one you have been doing it for years
What measure is the carburetor that uses the yamaha xt 225 year 2004. Thanks
Nice video. Thanks.
Hi Mate,
A question;
At 21:00 the needle you have,I was about to remove the needle and it dropped off from my hand,it has some rings/shims,now I dont know how to put it back :(
There are 3 rings/shims,I dont know which where it goes?Do the shims go on the bottom of the needle or on top?
Coud you help please?
Just Me don't really understand what you're saying but go look at Yamaha parts warehouse and look up your model at the steamatic diagram, did you drop it on the floor or did it came apart don't understand what you're saying
99neworleans
Sorry about my english.
I found this,and my question is pretty much the same.
www.xt225.com/forums/ubbthreads.php?ubb=showflat&Number=45681&page=1
Hi, im a big fan and thank you for the videos, they re very helpful, i need a favour, i need to get a complete rear disk break unit for my Yamaha Serrow 225. Can u help me with it, names and brands cz mine was lost by the machanic few years ago
ebay
Gracias por su enseñanza profesor pero quiero saber cómo cambiar la diagrama del carburador de la XT 225 Yamaha gracias
why is errythang upside down at 1:21?
so the fuel don't drip out the tank
How much is the original low chicler of the motorcycle?
I bought a few of them for different motorcycles I don't remember which one
Muy bueno e instructivo el vídeo podrían traducirlo a español ?
Gracias por su enseñanza profesor pero quiero saber por qué pasa por el reboso del carburador de la XT 225 Yamaha de codigo 4VW-14901-10 CARBURADOR COMPLETO 1 gracias
My faring thing is all one piece goes all the way across,
odd, mine only has 1 throttle cable.
Is urs an 05
Yes I think so I had five of these bikes and I did it all of them it's the same from 97 to 2007 all bikes are the same other than color