This might change the way you dovetail.
ฝัง
- เผยแพร่เมื่อ 9 ก.พ. 2025
- Getting better dovetails just got a whole lot easier.
Compass Rose Toolworks: www.compassros...
Dovetail Square: www.compassros...
Vise Block: www.compassros...
Vise Block Lefty: www.compassros...
50% off all plans! rexkrueger.com
Patrons saw this video early: patreon.com/rexkrueger
Follow on Facebook: www.facebook.c...
Check out my Courses: rexkrueger.ret...
Get my woodturning book: www.rexkrueger....
Get My Book, Everyday Woodworking: amzn.to/3oyjC0E
Follow me on Instagram: @rexkrueger
---------------------------------------------------------------------
You need a workbench!!!!
Try the Minimum Timber Bench. Our most affordable design.
Get your plans here: www.rexkrueger...
Take the Course: tinyurl.com/43...
---------------------------------------------------------------------
The Incredible English Joiner's Bench: A REAL bench that a beginner can build.
Complete Joiner's Bench Bundle (40 pages, full color): bit.ly/2QZls9T
Incredible English Joiner's Bench: • The incredible English...
Playlist: • The Joiners Bench
---------------------------------------------------------------------
Become a member of this channel!
Get custom badges and emojis you can use during chats: / @rexkrueger
----------------------------------------------------------------------
Wood Work for Humans Tool List (affiliate):
Cutting
Gyokucho Ryoba Saw: amzn.to/2Z5Wmda
Dewalt Panel Saw: amzn.to/2HJqGmO
Suizan Dozuki Handsaw: amzn.to/3abRyXB
(Winner of the affordable dovetail-saw shootout.)
Spear and Jackson Tenon Saw: amzn.to/2zykhs6
(Needs tune-up to work well.)
Crown Tenon Saw: amzn.to/3l89Dut
(Works out of the box)
Carving Knife: amzn.to/2DkbsnM
Narex True Imperial Chisels: amzn.to/2EX4xls
(My favorite affordable new chisels.)
Blue-Handled Marples Chisels: amzn.to/2tVJARY
(I use these to make the DIY specialty planes, but I also like them for general work.)
Sharpening
Honing Guide: amzn.to/2TaJEZM
Norton Coarse/Fine Oil Stone: amzn.to/36seh2m
Natural Arkansas Fine Oil Stone: amzn.to/3irDQmq
Green buffing compound: amzn.to/2XuUBE2
Marking and Measuring
Stockman Knife: amzn.to/2Pp4bWP
(For marking and the built-in awl).
Speed Square: amzn.to/3gSi6jK
Stanley Marking Knife: amzn.to/2Ewrxo3
(Excellent, inexpensive marking knife.)
Blue Kreg measuring jig: amzn.to/2QTnKYd
Round-head Protractor: amzn.to/37fJ6oz
Drilling
Forstener Bits: amzn.to/3jpBgPl
Spade Bits: amzn.to/2U5kvML
Work-Holding
Orange F Clamps: amzn.to/2u3tp4X
Screw Clamp: amzn.to/3gCa5i8
#woodworking #woodworkingtips #diy #tooltips
Dovetail Square: www.compassrosetools.com/store/p/dovetail-square
Vise Block: www.compassrosetools.com/store/p/vise-block
Vise Block Lefty: www.compassrosetools.com/store/p/vise-block-lefty
50% off all plans! rexkrueger.com
Your vice anti racking block could easily be ambidextrous. Varying blocks in middle of a tee or X, shorter wings in both directions to locate on edge of workbench
We looked at many designs and we feel like it isn't a good idea from a function or materials standpoint.
Hey Rex I just wanna say you are a very good woodworking youtuber.
I would say a very good youtubing woodworker.
@@michaelt312 Yeah, he's built his skill a lot over the years and is sharing it with us.
@@michaelt312 I’d say that was exactly the point of this ice cold backhander.
@@mm9773, I'm guessing Rex is an amazing woodworker. I, for one, am really glad he is sharing his knowledge.
Rex, I don't mind this being a commercial. These are tools that just make sense. I'll be heading to your website.
In Australia, buttered toast always lands buttered side up.
That's all nice and good but everything in your flora & fauna can and wants to kill you.
Hmmm, all though, that toast thing sounds good. I'm in, it's moving time.
Lucky you.
Same here in Brazil 🙌🏽
@@sheilbwright7649 no, it’s just that you’re upside down.
@@sheilbwright7649 buttered side up ... On the ceiling
I love your channel, even though I don't have the space in my life to be doing woodworking, I love learning about it anyway.
Coming up with new ideas and products to solve common problems and then manufacturing and marketing them is a whole different game than making educative and interesting videos, but you seem to have hit the bullseye twice! Love to see it
That's a cool little tool. I use a small double square for dovetail layout and cut the angles by eye.
Ive just gotten into woodworking as I got commissioned to make something I quickly realized I didn't have the skills to make. Your videos have been a great help and woodworking is quickly becoming a passion of mine. I just flattened the top of my new workbench I am making out of scavengeged lumber. I was able to tune and sharpen a harbor freight hand plane to take really nice shavings and its been doing everything I need for now.
And for anyone reading this comment. You really do have to start from where you are. I have very little time or money to put into this craft, but I have shop space available to me that others would envy. Your journey is going to be different than anyone else's, whoever you are. But you really do just need to get your hands on some materials and the tools that are available and get to work learning them.
My vises do not need spacer blocks but I do like the look of that dovetail square, very nice little gadget - pocketable too...!
I really like that the surfaces that matter, the ones you'll be marking, are on the inside and mostly protected from dings and drops. Better than the butterfly in many ways.
Just got my Compass Rose Dovetail Square in the mail today (with free hand tool hero!) and love the fit, finish, and feel of it. Can't wait to use it on my next project.
*THANK YOU!*, Mr. Krueger!
I've got the Vise Block (1st run) & I don't even have a workbench yet!
Now I've got to get the Dovetail Square as soon as I get the bucks.
And I've never even tried to cut "dovetails" yet.
I did try this unusual woodworking joint that consists of a large bowtie-shaped piece (double-ended dovetail?, |>
That's a beautiful little piece of engineering. Your "commercial" had one of the best layout tutorials I've seen, and was entertaining all the way through even though I'm not necessarily the customer for this product. Love it.
I never considered using my planes as a flat surface before...Brilliant!
I am not a customer for this product, but I love it when a woodworker come up with better tools, alone in their basement without the help of any Research & Development lab. Solving problems for everyone else by combining YEARS of frustration and thinking. This Dovetail Square packs so many features! And precision machined, made in USA too. Well done.
I love more ways to do dovetails! I'm always trying to cram them into my work when I can, I've gotten to the point of resenting having to use glue or other fasteners.
Now THAT is a tool I am willing to buy. Everything you have done before is useful and practical, but this square is the first item that I really feel is something that I need to have to take my work to the next level. Keep going in that direction, high quality innovative tools for the hand tool woodworker.
To be honest, you didn't need it. But it is still pretty
Ralphy it's a rotten commercial !🤣
Rex, I would love to see you develop a juicer or a vegetable chopper, just so I can see the infomercial. You are a delight and I love to see you succeed
Fun fact: In a paper that was published earlier this year, the authors showed that the two Liriodendron species (tulip poplar and a close relative, native to China), have microstructural characteristics that are sort of in between those of “normal” hardwoods and softwoods. So far, it appears that these are the only two species for which this is true, but other trees in the magnolia family might also share these characteristics.
So I guess that means you’re going to need to make a square with an in-between angle just for tulip poplar….
Got my square today. It is very nice. Nice boutique tool, I feel.
Very interesting designs. You do a lot for the community. Happy to see you do an advertisement for your innovative tools.
I put my order in for the dovetail square and finally signed up for the patreon. Thanks for all you do for the craft!
Thank you!!
both tools are impressive. and the dovetail square is genius. I must have the square but I'm retired on fixed income so gotta "save up my allowance" as we used to say as kids.Still a bit of a newbie so just now starting to work up the courage to dive into dovetails and your tool will be a great boost for me.
Mr. Krueger, thank you for what you do. I bought your book Everyday Woodworking. Nicey, nicey. I made your Roman workbench. As a twist on your design, I used the Beall woodthreading system to make 4 of 1-1/2" "bolts" (2 each) to fasten the 2 battens to the 2 X 6's. For legs, I put 1-1/2" threads on the ends of the 4 hardwood dowels. They go thru the battens and into the angled tap threaded 2 X 6 holes. It's truely portable with the threads in the parts. It was a challenge to make the angled leg holes with the 1-1/2" wood tap. It's not perfect, but I fumbled my way through it.
This is such an amazing idea and game changer for dovetails. Ill be ordering one soon
Not a product for what what I do, but it looks amazingly designed and manufactured. Good work!
That's really good! I didn't think there would be room for yet another dovetail guide, but this is so much more.
Granted, it actually was a commercial, but still very interesting!
I WANT ONE!!!
Honestly, I probably don’t need that. But, I do like the idea of supporting you, and the tool is just a bonus.
Aaaand bought. (the dovetail square. Looks awesome. Can't wait to get to use it.)
Paul Sellers How to Make Dovetail Templates video is a great resource.
Nice design - Similar to the Woodpeckers indexable square, a further small bit of flat aluminum towards the base of the square (near the logo) would help keep the square balanced on the timber.
I've been looking for a tool like this for a long time. This is awesome, purchased!
This looks very nice and if I didn't already have a couple of dovetail marking tools, I'd consider this, but it is a bit pricey for something I don't really need at the moment. That said, it did get me back on your website and I'm stoked that you offer the planing stop in a lefty version now! So I'll be picking that up for sure.
What a great tool. A little pricey for my budget but I’m definitely going to put it on my list!
Hmm, for some reason, this did not pop up on my You Tube feed.... That dove tail lay out tool looks pretty good. May have to get one if I remember....
Oh man now I gotta get this one . I’m trying to MASTER the dovetail. Damn you know us so well! Good job Rex! Another great product
After previously complaining, thank you for returning to your normal type of videos.
I hope this isn't the "normal type".
This is fantastic! Great work!!!!
You’ve definitely thought of a lot with that little chap, it looks great!
Nice to see something anodised in another colour than red
I actually rarely use my 6" combo. I find i really like my 4" machinist square with the base on the short side.
yours is probably a little smaller... and certainly lighter.... but also way more expensive. You did say premium tool though. 😊
Thanks for a great video-mercial.
You didnt really talk about use case for the ogie end though... and i don't see you do much with that design in your work, so i am very curious why you designed it into your tool.
Hi Rex
Fantastic work on the dovetail square! . I love the design and craftsmanship - super impressive! Unfortunately, it's a shame I can't get one since your store doesn't ship to Denmark. Hope you’ll consider offering shipping to Denmark someday - I’d love to get my hands on one
Merry Christmas. 🎉
I've tried a bunch of different dovetail layout tools and keep going back to Paul Sellers homemade one
Hard to beat, I made mine thicker so I can lay out in one move. Made a huge difference in time and much simpler to use. They can be tricky to get perfect though.
@@jimcarter4929 You can always stick some sandpaper to a straight and square bit of wood (or any material) and dial in your squares, jigs and shooting boards. No big deal.
PETG stands for Polyethylene Terephthalate Glycol. It's basically the same as is in PET bottles you buy soda in with some added Glycol to make it easier to use in a 3D printer.
I definitely see the value of this tool, but I'm not going to lie, Rex flailing his combination square on the end of a board like that is getting really close to infomercial territory :D
That’s literally what this video is
He was just exaggerating for the sake of demonstration
Absolutely
Hyperbole
I swear by wooden, shopmade dovetail guides. I believe both Paul Sellers and Wortheffort have videos on their making. I keep one in 1:8 and one in 1:6 and just write the ratio in red marker on it.
Here he goes again! Tks Rex
Amazing stuff buddy. Just a dream looking tool vs the other options out there
This makes me want to try my hand at dovetails!
I received mine today!
Brilliant, Rex! Fantastic little tool! 😃
Stay safe there with your family! 🖖😊
Oh that's a smart and pretty tool
Neat little jig. Hope you sell a million. Premium as you say but maybe a little to fancy lad for my meager tool set. I did get the planning stop today that I ordered from Compass Rose and I am going to mount it on my naked Nicholson bench this weekend and give it a spin.
Great Tool rex !
Rex. Your design is really well thought out. Very details. Smart. I thought Katz-Moses did that kind of engineering. I have his dovetail jig also. Plus, I made a Paul Sellers version and there on or two others. I have to think in this one. But, I would have loved to see a video on the design process. Looks Woodpeckerish. Except the color.
Well you are just full of good and handy ideas Rex. Pretty nifty stuff.👍
hi Rex love your channel bro. i been watching you for many years. i got your compassrose website dialed in and i look forward to purchasing from you when i need something. thanx for all your good effort and good videos! cheers from scary Gary Indiana
Nice job , very well thought out
You can just make a dovetail guide from a piece of scrap wood.
That's somewhere between nifty and amazing. Closer to amazing.
REX 😫😫😫 I want one so bad but it’s not in the budget right now…… just gonna comment to boost the algorithm..
Yes! This is great! But I have the KM 1:6 jig and you chose 1:5.
Might have to get the 1:8 so I can use this too!
Watched the whole thing and love what you're doing, Rex. Would you consider doing a follow up to the saw accident? It looks like it healed well, but would like to know how it went and that you're back 💯. Thanks, Rex!
The thumb gets a little weird in cold weather. Gets sore and kinda peels, but it's good. Doesn't impact my life. But i now only use my table saw a few times a year. I don't like using it.
@@RexKrueger Hopefully the cold weather stuff gets better with time. Maybe you could design a track saw-based workbench? I don't think I'm alone in going with a track and miter saw and skipping the table saw all together. It's gaining in popularity.
Great idea!
I feel like I’m watching Thomas Edison invent something new. How exciting to watch RK in his element, improving my world and yours. For many years the genuine excitement of this good man has blessed my own woodworking journey. The Lord made the wood and Rex made the tools to work it.
Fyi Thomas Edison unfortunatley stole most of his big ideas from Tels and other inventors and just patented them as his own because many inventors and scientist at that time felt that science should be for everyone and should not be patented.
I love this guy
Oh, darn it. Looks like I'm going to be dove tailing.
Are you planning on restocking the router plane kit? I have a project coming that I could use a router for but it hasn’t been in stock for a while
We want to, but we need a new supplier for the blades.
now what I need is shop space!! when will that be in stock??
I wouldn't mind owning your dovetail square but $67 is a bit steep. I know it's difficult to compete with big box stores manufacturing and pricing though. Good luck. Thanks for the informative video.
PET-G sooo 3d printable, cool
Nice one. Happy Christmas guys.
I like it.
Whow. Hold up swole up… compass rose tools is your company? 🤯 Rex wth! How didn’t I know that.
Yup, it's ours. I say our because I could never do it without my team.
That's a good lookin square....
$67 for the dovetail square. Hard to justify for a hobby woodworker like me. But it is one well engineered tool made of aluminium 👍 I like it. May be someday!
That's a nice little square you have designed! The problem is that with 2 different angles in that little window, you now have a great way to make a screw-up by using the wrong one inadvertently. Lots of times we are marking on the back side of a board and you may not be able to see and read what side of the window you are using. I would rather have the triangular window with the same angle on both left and right sides. Sooo- sell me 2 squares and I will not have the opportunity to have two different dovetail angles on the same work-piece (unless, of course, I take both squares to the bench at the same time)😟
Nice design for the dovetail square, but I usually mark with a knife and I suspect the aluminum construction won't hold up. Think about making a steel version, please.
That looks nifty! Would there be any chance to make it in other colours? I would love it in black because I am boring. But open to purple! haha
When you cranked you vice down, if you watch closely, you can see the top of your bench moving/the apron of your bench bending, hard to tell which exactly, but you might want to reinforce that corner of your bench.
I didn't notice that myself, but I have a home made vice that used construction lumber for the front apron like his does as the inner jaw.
I had to make a 90 degree bracket that I put on the inside corner between the apron and bench top. That worked a treat for my setup and fixed a major issue that I had when just clamping a smaller piece that only interjected with front jaw and bench top.
Just ordered 😊
Thank you! We hope you love it!
0:29 and that goes in the square hole 👀
assuming that's a reference to this? th-cam.com/video/baY3SaIhfl0/w-d-xo.html
These look great. I was just on your website and I can't find the router plane that you made. Are you out of them or are you bringing a new design out?
Sweet but defo add a chamfer to the pen window since most implements are tapered. Seems a shame to mar one up doing it ourselves when every other bit seems so well thought out.
I have a sort of similar plastic one from aliX and the non hard edges to the window catch the taper on my mechanical pencil unless i'm perfectly positioned.
Could you add a facility in the vise squares so a left and right hand can be fixed together?
I don't know, Rex! Your Dovetail Square seems very well thought out, however, at $69 it is wildly more expensive than the $9 competitor! That difference is so large, I have to spend the time to look for alternatives. I don't know how good they are, but I do see a range of other options... IMO, you should seriously consider a lower price point.
Nice work!
Could you comment on why different ratios/angles are used?
...anc ciuld you _please_ add germany /EU to your shop destination options?
BR
I enjoy your commercials
As we say in Scotland, use yer eyes!
Looks far more useful than those red anodized tools 😜
Which.. the Woodies or Chinese? 😅
Até 1900 e antigamente não tinha nenhum desses gabaritos modernos e a marcenaria durava séculos.
Amazing!
Hi Rex wanted to order left/right handed vise block and dovetail guide. Unfortunately the shop doesn't offer delivery to Germany. :-( am I missing sth? Thank you for the great content. It helps me a lot getting started in woodworking. Cheers
Thanks for teaching me these things. I don’t have a dad who cared about spending quality time with me. Had to teach myself a lot, and these videos help
Really lovely! How does it hold up to knifing? I'm not buying anything for myself until after the holidays but I want to put one of these and a vice block (and maybe a sawyer's hook...) in my cart in the new year.
Well, it's aluminum, so you have to knife with care, but i use wood squares and don't cut them quiet the knife. It takes a little thought, but it's not hard.
Let me guess salesman Rex, you get a kickback from Amazon for everyone of these things sold
Perfection would be you make it available in continental Europe.
It sounds good, but $67? Yikes!
Wont it be nice to be able to strike both the square line at the end and the angled dovetail line down the face in one go? But difrent strokes for difrent folks