The new kind of the hill , i am just amazed by Autel and its new technology i don't know if the competition can even catch up at this point . I can't wait to see more and more videos on this piece of high tech equipment please keep them coming and thanks for your time ! ! !
Chad actually demonstrated that click OBD there is no need for using any OBD breakout box and probes to scope the CAN circuit. I think it might be able to scope the entire OBD connector via the OBD connector. If that is the case with any car with Clear Flood Strategy (where you are able to hold the accelerator WOT and crank over engine without it starting, you could perform a quick pin 16 relative compression check on a car with a dead miss to rule out a compression issue without popping the hood in a few seconds before doing any tuneup.
@@gcmd5852 do you have escan too? The escop is prob my favorite the escan will stop the scope recording when dtc hit. Let me know when you are ready I’ll take care of you
Pete & Ashley Leavell anytime, excellent machine. Yeah check out www.aeswave.com you can get amp clamps cheap and good quality as well as leads. I’ll be doing some videos on them soon as well. This weeks prob
HI JAY LOOKS AWESOME WITH ALL THIS TECHNOLOGY IS THIS COME WITH FREE UP DATE AND AFTER THAT IS THE TOOL WILL OPERETTA IN NORMAL WAY OR YOU NEED TO PAY FOR THAT. GOOD INFO THANKS FOR SHARING CHEEEERS
j georges it’ll operate normally you don’t need to update but you loose feature like secure gateway etc and it stops at whatever years the last update is at,
I'm a bottom feeder Lurker that will wait 2 or 3 years and watch all the tool bugs get worked out of things over time and all the Initial hype is gone, and watch if the 13" screens and VCMI's stand up to the test of time.Then when prices drops down to my level maybe I'll just hit the Lure for the less hyped smaller 128gb MS919 when that's down around to what I paid for my discounted Elite that came with 2 yrs of updates and a VCI100.
The new kind of the hill , i am just amazed by Autel and its new technology i don't know if the competition can even catch up at this point . I can't wait to see more and more videos on this piece of high tech equipment please keep them coming and thanks for your time ! ! !
Chad actually demonstrated that click OBD there is no need for using any OBD breakout box and probes to scope the CAN circuit. I think it might be able to scope the entire OBD connector via the OBD connector. If that is the case with any car with Clear Flood Strategy (where you are able to hold the accelerator WOT and crank over engine without it starting, you could perform a quick pin 16 relative compression check on a car with a dead miss to rule out a compression issue without popping the hood in a few seconds before doing any tuneup.
The man with many great Gadgets!!! Thanks for the quick review.
Eli TheOBDTech thanks brother hope all is well
@@weldingjunkie Thanks Jay, everything is all well. Happy 4th July!!
You had to get it, Jay. Cool as
dave sterl thanks Dave, hope all is well my friend cheers
Great video...ill subscribe brother..
@@GearsAxles thanks man I appreciate the support. I’m going to be putting some new stuff out
Thank you. Great video!
Nice vid! Not sure I like the idea of a wireless scope though. Let us know how it goes in future. Nice work picking up the ultra so early!
Thanks for your very helpful videos awesome.👍
How much is the price for this beautiful toy and where can I buy.
Does that scope filter any better than the 408?
It’s a 1GS scopes the sample rate is twice as fast so it’s def a lot cleaner from the start.
@@weldingjunkie You should do a couple more Escope review type videos.
@@gcmd5852 im going to soon now that I’m a distributor
@@weldingjunkie Cool deal, might not take much to sell me a 4 channel.
@@gcmd5852 do you have escan too? The escop is prob my favorite the escan will stop the scope recording when dtc hit. Let me know when you are ready I’ll take care of you
Can you use all pico accessories
Yes that’s what I love about it. I can use my pico, Autel, ATS scope stuff all with all its great
@@weldingjunkie thanks. just bought the 919, smaller but I get the vcmi. anyways looking for accessories... amp clamp, transducers, etc...
Pete & Ashley Leavell anytime, excellent machine. Yeah check out www.aeswave.com you can get amp clamps cheap and good quality as well as leads. I’ll be doing some videos on them soon as well. This weeks prob
HI JAY LOOKS AWESOME WITH ALL THIS TECHNOLOGY IS THIS COME WITH FREE UP DATE AND AFTER THAT IS THE TOOL WILL OPERETTA IN NORMAL WAY OR YOU NEED TO PAY FOR THAT. GOOD INFO THANKS FOR SHARING CHEEEERS
j georges it’ll operate normally you don’t need to update but you loose feature like secure gateway etc and it stops at whatever years the last update is at,
@@weldingjunkie THANKS for quick replay appreciated i really enjoy ur videos cheeers
Can you do this without subscription?
Where did you get it from i haven’t been able to find it
Are you in the USA?
Are you connect through Wi-Fi or Bluetooth I know they can do both but I wonder which one is faster
Wi-Fi faster Bluetooth further range
I'm a bottom feeder Lurker that will wait 2 or 3 years and watch all the tool bugs get worked out of things over time and all the Initial hype is gone, and watch if the 13" screens and VCMI's stand up to the test of time.Then when prices drops down to my level maybe I'll just hit the Lure for the less hyped smaller 128gb MS919 when that's down around to what I paid for my discounted Elite that came with 2 yrs of updates and a VCI100.
Nice!
-Lou
How much did you pay for autel ultra?
New VCMI 5 in 1
Yes Absoutley amazing. Great work by Autel.
how much the price
jovan gomez it all depends on who you buy ig from. Anywhere up to $5600 I would guess