12 Nm for drain bolt, 8 Nm for refill bolt - correct torque values. Refill bolt is made from plastic and can be easily snapped off if over torqued. Bike should be on side stand not centre stand when final drive is filled up with new oil. Oil quantity varies between 200 - 210 ml.
Just bought a VFR 1200 and your video was very helpful. It only has 4300 miles but I don't think the final drive oil had ever been changed. For those of you who don't know, the bike feels MUCH smoother after the final drive oil change. BIG difference!
Good video thanks. Handbook dosnt mention putting back on mainstand to refill. Does the actual service manual say that. Flicked through a pdf online manual couldn't find details.
This should be a video on how NOT to do this procedure. You overfilled the oil. The fact that oil spilled out the fill area is proof that someone overfilled it on the change BEFORE this one also.
Does anybody know the difference between the Motul SAE80W90 GEARBOX and HD? Rafal is using the HD for his oil change but I'm curious to know if the GEARBOX would be better or not (well, at least it is more expensive)! Thanks!
Hi Rafal, I have a VFR in Brazil and will soon do the final shaft oil change. Do you have to warm the oil before the change? Maybe a quick ride with the bike to warm up the oil?
Hi! yes, after the quick ride (to warm up the oil) I slightly unscrew the cap (final gear case hole) and equalize the pressure in the final shaft. Please remember to tilt the bike before, otherwise the oil will run out.
Olá Henrique. Td bem? Tb possuo uma VFR1200f. A minha é 2011. Você tem algum fórum de discussão ou algum grupo onde compartilha as experiências com a VFR?
12 Nm for drain bolt, 8 Nm for refill bolt - correct torque values. Refill bolt is made from plastic and can be easily snapped off if over torqued. Bike should be on side stand not centre stand when final drive is filled up with new oil. Oil quantity varies between 200 - 210 ml.
Yep side stand when filling and checking level. 👍🏻
Just bought a VFR 1200 and your video was very helpful. It only has 4300 miles but I don't think the final drive oil had ever been changed. For those of you who don't know, the bike feels MUCH smoother after the final drive oil change. BIG difference!
Według instrukcji zalewanie oleju do przelania się powinno się robić na nóżce bocznej nie centralnej , więc wlewasz więcej oleju niż zalecane .
masz rację. poprawię film
Good video thanks.
Handbook dosnt mention putting back on mainstand to refill. Does the actual service manual say that. Flicked through a pdf online manual couldn't find details.
Put the bike on side stand to get the correct level when u refill oil 👍🏻
@@gilomoto5148 thank you, I did decide to do it that way in the end.
I was a bit late to the party 😂✊🏻
Algún video donde se pueda ver el desmontaje completo del cardan, para poder engrasarlo? Muchas gracias
As a novice, thank you and some god comments
Algún video donde se pueda ver como se desmonta el cardan completo para poder engrasarlo? Muchas gracias
Warto by w opisie filmu dodać momenty dokręcania obu korków
@Rafał Będziesz robił filmik z wymiany/czyszczenia filtra ?
Your rear wheel has a buckle
Bardzo dobra robota wszystko Szybko sprawnie i na temat...👍
@Rafał da rade równie prosto wymienić płyn hamulcowy ?
👍
This should be a video on how NOT to do this procedure. You overfilled the oil. The fact that oil spilled out the fill area is proof that someone overfilled it on the change BEFORE this one also.
Does anybody know the difference between the Motul SAE80W90 GEARBOX and HD? Rafal is using the HD for his oil change but I'm curious to know if the GEARBOX would be better or not (well, at least it is more expensive)! Thanks!
It is not good video !!! Oil is replace in side stand !!!
Hi Rafal, I have a VFR in Brazil and will soon do the final shaft oil change. Do you have to warm the oil before the change? Maybe a quick ride with the bike to warm up the oil?
Hi! yes, after the quick ride (to warm up the oil) I slightly unscrew the cap (final gear case hole) and equalize the pressure in the final shaft. Please remember to tilt the bike before, otherwise the oil will run out.
@@Rafa-ff1ky thanks you!
@@sonics747 thanks for the tips Sonics747!
Olá Henrique. Td bem?
Tb possuo uma VFR1200f. A minha é 2011.
Você tem algum fórum de discussão ou algum grupo onde compartilha as experiências com a VFR?
Po pierwszej przejażdżce od wymiany oleju, pamiętaj o wyrównaniu ciśnienia w wale końcowym.
Można tochę jaśniej ?
這顆洩油螺絲很脆弱，要用扭力板手照手冊扭力值鎖，不可鎖太大力，否則容易斷裂，這一顆螺絲將近NT$600台幣，我就因此買了一顆，叫貨等了三個月
Level is only correct on the side stand, you overfilled the oil.
you're right. I'll correct the video