NineBot One Manual Calibration
ฝัง
- เผยแพร่เมื่อ 24 ก.พ. 2016
- This will calibrate BOTH the Pitch and Roll Angles on your NineBot One. I'm using my NineBot One E+ for the demonstration.
When using the In-App Calibration, it only calibrates the Pitch Angle.
Since I've been asked a few times, here is the USB Rechargeable light mounted on the back: www.amazon.com/gp/product/B01... - ยานยนต์และพาหนะ
thank you for this, thought my old wheel was toast but now its fine
Awesome! I’m glad it worked for you. I sure miss my NineBot One. It’s a great wheel.
@@SuperSport1966 giving it to my son to learn on. you still riding?
That’s awesome! I still ride, but I’m on an MSuper X now.
NICE TUTORIAL VIDEO
omg thankyou u saved me lol thwe wheel kept making my feet tilt so far up and i fixed it thx to this video
Yeah, it can be very uncomfortable riding that way. Now you should be able to ride much longer before your legs get tired.
Thanks! I always wondered how or if it was possible. Do you think having the pedals slightly tilted forward is better than level?
I prefer them perfectly level. I tried it slightly backwards, but I noticed I kept hitting the speed warning. And that makes me very uncomfortable. Slightly forward might make the toes touch easily during turns.
Btw, roll is sideways and pitch is forward. If its the same as with drones :)
I believe you are correct. If you open the app and tilt the wheel, you'll notice which is which.
i got a unicycle s1. i left it off for a ling time and it wont power on. the charger is working but it wont charge. any suggestion?
Likely the battery has dropped below the acceptable level so the BMS (Battery Management System) isn’t able to charge it anymore.
There are ways to jumpstart a battery pack again, but unless you know what you’re doing, don’t try that. It can be very dangerous.
Maybe see if you can find a battery builder in your area so they can try to bring it back to life. I don’t know if the battery for those is still available for sale since it is a slightly older model.
Thanks for the video. Appreciated.
I have question for you, what is the benefit of doing calibration?
Is it good for driving quality?
Sinan yılmaz It is only needed if your wheel is leaning forward or backwards, or if your side to side calibration is off.
No need to do this if you are not having issues.
I have some another problem with driving. When I ride it, ninebot sometimes waves.
Not all the time but sometimes it shakes. Is calibration reason for that?
Sinan yılmaz You could try calibration, but that sounds more like a bad Motherboard. Is your wheel still under warranty? There have been some issues with the board going bad and having that symptom. It can happen with any brand, not just NineBot.
Yes it is in warranty. I will go to the dealer tomorrow. Thank you for your fast reply.
Appreciated.
Good Luck, and let us know what they say.
I have a problem is that the battery is not filled only charging half
If you have access to another charger, I would try that first to rule that out. If it's not the charger, then you likely have a bad battery, or BMS (Battery Management System), which is inside the battery. If you need a battery, you should be able to get one from SpeedyFeet or eWheels.com or another vendor. Here is Speedyfeet's website: www.speedyfeet.co.uk/collections/ninebot-one-parts/products/ninebot-one-e-320wh-replacement-spare-battery
Can't believe I am the only one to ask this, but where did you get the wire stand? Have you seen any stands you like better?
Goin Postal I'm on my mobile right now, so not sure if I already answered this. I bought it at BangGood.com. It's around $5. I prefer the Guitar Stand option. That's what I use now.
Wire Stand
m.banggood.com/search/unicycle-stand.html
Guitar Stand
www.amazon.com/dp/B00LBKFYUO/ref=cm_sw_r_cp_api_7FsHybE8PXV0D
SuperSport1966 thanks! You are always very supportive to myself and the community. You did answer this previously regarding the wire stand, and by pure coincidence, I came across your guitar stand on the euc forum this morning, and immediately ordered it. 👍🏾
Ok, thanks! I was on my phone and didn't see the reply. I know that sometimes I need to verify my replies have actually been sent, or they aren't and I don't realize it.
Hi! My Ninebot one E is carried away by the weight of the parking stand. It moves back after power on.
I try to calibrate but no success. Is it normal?
Mike B. Yes, it is normal for the wheel to move if extra weight is applied to one side of the wheel. That is how it keeps itself balanced when you lean forward while riding it.
When leaning my wheel against a wall, I sometimes need to prop it up carefully so it does not take off.
@@SuperSport1966 so we cannot calibrate this?
Mike B. You can definitely calibrate it. The calibration tells the control board when your wheel is level. Calibration is used to set your pedals level to the ground.
When you HOLD the wheel straight up, with the tire on the ground, it should not move. That means it’s calibrated.
If you let it go, and the weight leans the wheel, it is going to move to try to rebalance itself. That is normal behavior.
So, calibrate your wheel so that the pedals are level, and you should be good.
When you hold your wheel level so that the pedals are level, if it does not move, then it is already calibrated. You have to hold it level, because if you let it go, the weight will make the wheel lean and it will take off.
@@SuperSport1966 I have tried many times. Whatever the initial angle position of the pedals, the wheel always detects the extra weight is applied to one side of the wheel.
Mike B. As it should. Calibrating does not make your wheel balance when the weight of accessories changes. Calibrating simply sets your pedals level.
how did you mount the back light? and what light is it?
If you search Amazon for this "Classic Glow -Rechargeable LED Bike Light Set, Cycling Headlight and Taillight, 2 USB Cables Included" you will see what I bought. There might be cheaper sources. To mount on the back, I needed to drill a small hole in the aluminum cap and just put a screw through it to the NineBot's Screw Hole. I'll try to post a video of it for you.
Would be nice thanks
I just put a link directly to the lights bought in the description above. Still uploading the video.
i live in the netherlands and amazon will not ship them to the netherlands do you know an alternative?
th-cam.com/video/EWLKY4dtNtA/w-d-xo.html
Will this work for the S2?
Johnnie I’m not really sure. I haven’t heard of anyone trying it. I guess it wouldn’t hurt to try.
But, unless your wheel is having issues, there’s really no reason to do the calibration.
@@SuperSport1966 Thanks man, but I downloaded the latest software and I have so many problems now. I get on my ride and it doesn't move, but the gyros are running. I'm getting pissed off, because these guys are making software that is supposed to run all their vehicles.
Johnnie does it shake when you try to move? Like it is locked?
@@SuperSport1966 Nope. Like there is resistance, like it should have. I get on and lean forward and nothing. I'm in the EST zone, btw.
@@johnnie135 I guess you have nothing to loose, so I'd try calibration. But it almost sounds as if you have a board or loose wire issue.