DIY Predator Mask! (3D Printed)

This video is now on my personal channel. Please check it out there: • DIY Predator Mask! (3D...
This is how I made the mask from the Predator movie from 1987. I 3D printed the mask on my CR-10 and used spray paint and acrylics to paint it. I used 3/4" backer rod and plasti dip for the dreadlocks.
=-=-=-=-=-=-=-=-=
STUFF IN THE VIDEO
Model I printed: www.thingivers...
TOOLS/MATERIALS
All of these links are the links I used to get the materials. Please note that they are mostly Amazon.ca links. If you do not live in Canada, some products may not be available. All of these links were active at the time of making this video, but some products may be unavailable in the future.
(Anything without a link can probably be bought from a hardware store, besides the printer itself)
Printer: Creality CR-10
Filament “ERYONE Filament PLA 1.75mm” (in the video I credited Creality PLA, which I have used in the past, but for this project it was sold out so I used ERYONE PLA. Personally, I didn’t notice a difference.)
www.amazon.ca/...
Glue “Mitreapel Instant Adhesive CA 400 (13.5 fl oz.) with Adhesive Activator (1)” www.amazon.ca/...
Epoxy “VViViD Optically Clear 2-Part Epoxy Resin Hard Coating (750g Small Pack)” www.amazon.ca/...
Filler “Bondo Professional Gold Body Repair Kit, Quart, (01313C)” www.amazon.ca/...
Spot Putty “Bondo Glazing and Spot Putty, 2.5oz)”
www.amazon.ca/...
Sandpaper: 80-800 grit
Primer: Filler Primer
Paint: Black Spray Paint, Silver Acrylic Paint, Brown Acrylic Paint, Clear Spray Paint, Gold Spray Paint
Backer Rod “Backer Rod For Gaps and Joints, 3/4-by-20 Feet, Gray”
www.amazon.ca/...
Plasti Dip “Plasti Dip Performix 11203 Black Multi-Purpose Rubber Coating Aerosol-11 Ounce” www.amazon.ca/...
Other Stuff: Hot Glue, Baseball Cap, Old Sunglasses
(can be found at a dollar store)
MUSIC
“Binary Heavens” by Formantx
• Binary Heavens
“Final Frontier” by Janet Jones
• Janet Jones - Final Fr...
“Slow Motion” by Elliptik
• Slow Motion
“Stay Alive” by Giovanni Puocci
• Giovanni Puocci - Stay...

[@Pyred89]

This man needs to upload again

[@jefferyb11]

Big fan of the yautjas lol. Ordered a 3D printer yesterday .. this is definitely gonna be my first big project after I spend some time to figure it all out. Not gonna lie if it ends up working out though I’ma just make the whole damn suit functional plasma caster and all 🤣😂

[@jefferyb11]

Update: I did it.

[@KimaliaX]

Very nice! good job! keep up the good work!

[@joshlopez2021]

Man you did that all by yourself man amazing

[@thenanook]

excellent job!!!

[@sergiopalau7249]

Que usaste para los detalles de las rastas,donde encontraste el stl.

[@TristanGeier923]

You soooooo deserve more subs

[@79michali]

Thats awesome!!!

[@Diana-wg1tm]

I used 1 inch backer rod and it doesn't move freely enough like dreadlocks should especially if you have a shoulder Cannon you won't be able to move your head very easily because the backer rod it's just a little too hard although it looks phenomenal. I had to take all of it off and redo it in a different material. I suppose when you go smaller and backer rod they move a little bit more freely the smaller you go but they don't look that well when you go half inch or less.

[@Распродажатоваров-л6р]

Что вы использовали в итоге? Делаю маску, но упёрся в дреды

[@pitstop4438]

very nice bro

[@vdsmade]

Great job 👊😎

[@bigtush85]

Cool

[@jacobnator-hi5ir]

isn't super glue and CA glue the same..cyanoacrylate ? basically all the same.. I find using the cheap dollar tree super glues with my activator like yours, works well for me. anyways keep up the videos !! 🤘😲🤘

[@blarg444]

Not really an expert in glue lol. I just like to use the glue and activator because its faster than standard glue.

[@blackc1479]

Yeah, it's the same thing.

[@dougdimmadomepog9013]

For the backer rod did you buy the 1 pack, 3 pack or 6 pack?

[@blarg444]

the stuff I got comes in a roll 20' long. I got 3 rolls

[@dougdimmadomepog9013]

@@blarg444 thanks

[@user-py6sy4zm1v]

Do u have a file for the beads that go on the dreads?

[@blarg444]

I've lost the stls, but they're just simple cylinders. Shouldn't be too hard to model them up in tinkercad or onshape

[@Dezero]

how long did you cut the dreadlocks to?

[@blarg444]

The average is about 16"

[@bigtush85]

Did u use supports?

[@2befitstudio419]

HI :) how wide the dreadlocks are?

[@blarg444]

I think I used 3/4" or 5/8". Either one should work

[@colebarnes6929]

Are you willing to make and sell another one????

[@blarg444]

I usually don't sell my projects. I encourage you to try building one for yourself! Even if you don't have a printer, there are services that will print the pieces for you, and you can paint it yourself.

[@colebarnes6929]

@@blarg444 agh damn but thank you for actually replying! Your videos are pretty cool I like them

[@B4tman25]

Como se llama la impresora?

[@bookie-scalp]

Printer: Creality CR-10

[@dcravan2952]

nodta madida