Making a Very Useful Mini Table Saw V2.0
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2023
- How to make a useful mini table saw? 3D printed hobby saw. In this video I will show you how to make an improved version of a small table saw with a 3D printer. A very useful and powerful saw for hobby work.
I redesigned this table saw to be much more functional. He works very well. I hope it will be useful for you too.
If you like my projects and want to support me to make them sustainable...
Patreon: patreon.com/KNDYP
TH-cam JOIN: www.youtube.com/@Kendin-Yap/join
You Needs:
DC 775 Motor 24V 15000Rpm: s.click.aliexpress.com/e/_DnP...
65mm circular saw blade (65x0.5x6x120T): s.click.aliexpress.com/e/_DeU...
(Blades between 60mm and 65mm with a hole diameter of 6mm can be used.)
Ball bearing 8X22X7 (608): s.click.aliexpress.com/e/_DBo...
Big timing pulley (40TW6B8) : s.click.aliexpress.com/e/_DEI...
Small timing pulley (20TB5W6) : s.click.aliexpress.com/e/_DEU...
2GT-200 Timing belt: s.click.aliexpress.com/e/_DCg...
Saw Blade Connecting Shaft (M6-8) : s.click.aliexpress.com/e/_DEJ...
8mm x 100mm Stainless Steel Rod: s.click.aliexpress.com/e/_DFW...
Power Supply 24V (6A or 8A) : s.click.aliexpress.com/e/_DBP... OR s.click.aliexpress.com/e/_DEv...
Rocker button: s.click.aliexpress.com/e/_Ddg...
Drill Chuck (8mm): s.click.aliexpress.com/e/_DmW...
Self Adhesive Metric Measure Tape : s.click.aliexpress.com/e/_DmM...
Silicone cable (14AWG): s.click.aliexpress.com/e/_DE2...
XT60 Connector: s.click.aliexpress.com/e/_DeF...
Screws (M2.2-2.3) : s.click.aliexpress.com/e/_DEv... (set-5)
Screws (M2.2 x 16mm) : s.click.aliexpress.com/e/_Dc6...
3x20mm : s.click.aliexpress.com/e/_DCB...
Acrylic Plate Plexiglas : s.click.aliexpress.com/e/_Dd8...
Heat-Shrink: s.click.aliexpress.com/e/_DnM...
Silver PLA Filament : s.click.aliexpress.com/e/_Dka...
TPU Flex Filament : s.click.aliexpress.com/e/_DF2...
Tachometer: s.click.aliexpress.com/e/_DEJ...
Mini Cordless Screwdriver: s.click.aliexpress.com/e/_Dn1...
MiniQ BG-515 Bench Drill Stand: s.click.aliexpress.com/e/_DCT...
Dimension: 190x188x58mm
Cutting Dept: 16.5mm (1.65cm)
Thanks for watching. If you want to support, join this channel.
/ @kendin-yap
3D Printer STL Files:
www.printables.com/model/7363...
Link for details: www.rcpano.net/2023/09/13/how...
CAUTION! : Cutting tools can be dangerous. Care should be taken while using it. It is recommended to use with protective glasses.
Thank you for watching. Please Remember to Share, Share and Subscribe for More Amazing Videos.
KendinYap Channel: / @kendin-yap
All of my videos : / kendinyap-video
#tablesaw #hobby - แนวปฏิบัติและการใช้ชีวิต
Nice job on the table saw. I would consider either putting a small flat on your shafts or drilling a dimple to give the grub screws a better grip.
Very nice work indeed. Btw don’t use a fence and a cross-cut mitre gauge at the same time, especially without a riving knife, otherwise you will have one less eye or one less finger! Very dangerous! You could def add a riving knife to this setup to make it safe tho.
What a great, useful contraption!
This such a cool build, blows my mind!
Only point of concern is that you should never use the miter gauge and the fence at the same time. It will cause material to pinch the blade and kick back. That piece flying back can cause a lot of damage. Or worse, pull in your hand into the blade.
That being said, you are using a tiny blade so it might not matter but….. caution.
Very nice! Thank you for sharing.
Well, I've just found my next project. Thanks for a great design and video
Well, what a great video. Excellent innovation - well done. Thanks for sharing this
A disc sander attachment at the edge would be the best thing ever
awesome and interesting build !
Parabéns jovem, ficou Top sua Míni Serra Circular de Bancada. 👍👏👏👏✌️👏👏👏
Hello, your work is really first class
Yine güzel bir çalışma 👍
Really nice job ! A splinter knife at the edge of the blade would have been perfect , or a leverage system plateforme (with a pivet) for the side blade would also have been a nice feature, so you push down to make the work piece goes up, so it can cross cut me while holding the piece sage and still
Thanks for Masterpiece
hocam çok güzel olmuş, hobiciler için çok kullanışlı,
Amazing project. I really love to watch your rc plane videos❤
Nice little table saw. We shared this video on our homemade tools forum this week 😎
Really nice job
mükemmel , elinize sağlık.
Very good video!! very helpful. It worked very well, you did a great job. I want to buy one to cut plastic pipes
Eline sağlık güzel bir çalışma olmuş. Bu sefer yapmak farz oldu artık. Malzemeleri toparlayalım bakalım.
You're a genius !!
Bu güzel olmuş beğendim
Nice project ! I want to make it.
What reference did you use for the nuts ?
Dear Friend,
I thought this project was well done and I tried to make it happen. Everything went smoothly except for a few
small filings here and there to remove the burrs produced by the printer.
During the testing, however, I realized that for the spindle part, in order for it to function according to the standard of drill bits (clockwise cutting), the motor must rotate in the opposite direction, otherwise, for tools such as brushes, sanders or grinders, these tend to unscrew from the support to which they are fixed. All good for the hacksaw function.
Therefore I made the change by putting a polarity inverter in place of the switch. Later I think I will also add a speed variator.
Congratulations for the project.
Eline saglik kral
buna benzer farklı projeler görmek isteriz.
Would be useful for creating D&D buildings.
不错,很厉害
Великолепно.
wow, this could put my beloved Proxxon table saw to shame.
daire testerenin sabitleme somununu normal somun yerine kilitli somun kullanılsa daha iyi olur bence 👍
Exactly. That's what I stated. Because it is very risky. It is necessary to be very careful with bogle devices and make sure that everything is intact. Because if that saw has difficulty cutting wood, then the saw will turn inside the screw.
It was very valuable
Great!. I'd love to see a mini-bandsaw but don't think they make bandsaw blades smaller than 10".
man is a genius
Ellerinize sağlık güzel olmuş. Çok teşekkürler.
Projenin üzerinde kendi elimdeki malzemelere göre bazı değişiklikler yapmak istiyorum.
STL dosyalarını düzenlemek biraz zor oluyor rica etsem step formatında yada proje dosyalarını paylaşabilirmisiniz ?
muy buen trabajo, un detalle esplendido es la lista de la compra, los archivos de impresión sin problemas, con tu permiso le voy a dar unos retoques, como desde el eje del motor 5mm sacarlo para otro chuk de 5mm que tengo. Muchísimas gracias por el aporte
Mantap...
Around 60€ to make it, I have some of my own parts.
And some filament. But Im gonna make it because I needed such saw for PCB many times. Thanks!!
çok güzel
Have you thought about putting something in the circuit to reduce the quite high start up current (relatively speaking) of these types of motors? I'm looking to do the same thing with a blower that I 3d printed using identical motor to reduce the sudden high torque and inrush current
You can use a high capacity capacitor. But I don't think this is necessary for 775 size 24V motors.
Teşekkürler
IF YOU CAN MAKE A VACUUM FORMING MACHINE, I BELIEVE IT WOULD BE AMAZING.
Güzel hocam
Çok muntazam bir proje olmuş. Tek aklıma takılan şey 0-1 anahtar oldu. Anahtar sanki biraz küçük geldi gözüme. Uzun süreli çalışmalarda akımı taşıyamaz gibi sabki.
Teşekkürler. Anahtar yeterlidir. Motorun çektiği maksimum akımdan daha fazlasını desteklemektedir.
Kendim yapayım mı gerçekten? Çok güzel tasarım olmuş, hassasiyet mini parçalar için nasıl sizce?
Baskı kaliteniz iyi olursa çok başarılı ve işlevsel bir testereniz olur.
Abi bide RC araba projesi bekliyorüz
Im currently printing main box.
Takes a lot of time but im 50% done.
Rest is printed already and parts waiting.
👏👏👏👏👏👏👏
can u make a telemetry module for apm ,pixhawk flightcontrollers?
Hocam elimde en basit 2ch 3.7v rc ucak var rüzgardan acayip aetkilendigi için ben bunun sistemini kendi yaptığım uçağa koyacağım elimde fazladan drone motorları var ben başka motorları bu uçağa eklesem sorun cikarmi
mantaps mannnn,,
That's a very nice little saw , I cant unzip the files from the uploaded archive , is there something wrong with it ? I want to make this table saw for me . Thank you for your help .
I checked and the link works (on windows PC). The files are compressed. (rar). You can unzip it with an unzip application.
Harika bir proje olmus! Bu parcalari aliexpress den soyleyince gumruk vs sorun oluyor mu? TR'den siparis verebilecegimiz site veya dukkan oneriniz var mi?
Linkleri referans amaçlı paylaştım. TR için İsimleri ile aratmanız gerek. her parçayı tek bir yerden bulmak pek mümkün değil. Listedeki 2-3 parça zaten TR linkleridir. Hepsi yurtdışı değil. aliexpress konusunda ise adetli olmaması gerekiyor ve 150usd nin altında olması gerekiyor. Ayrıca bir ay içerisinde maksimum 5 sipariş yasal sınırı var. Fazlası gümrüğe takılır. Bu konuları araştırıp karar vermelisiniz. Ben pek sorun yaşamadım. Ama yaşayanlar var. O yüzden sorun olmaz diyemem.
üst kapak, ilk tasarım ölçülerine uyumlu mu? İlk tasarımınızı yapmıştım sadece üst kapağı bassam uyar mı? Bu arada hocam sadece fikir açısından VangHà isimli bir kanal var, o eleman bu tarz şeyleri pvc borudan yapıyor. Lift sistemi çok hoşuma gitmişti, v3 yaparsanız inceleyebilirsiniz.
İlk versiyonun alt kutusu uymayacaktır. Bu üst tablanın kanal farklılıkları var.
The details on the 3d printer are made?
60mm dairesel testere bıçağının göbek çapı kaç olmalı?
Is there a readme file explaining the slicer profile for printing?
Infill %?
Layer height?
Layer width?
What printer did you use, and what was the flow you ran your model with? 60mm/s 500mm/s^2 acceleration?
The necessary settings are available in the detail link below the video.
@@Kendin-Yap Very good. Thank you.
Good
Hocam daha once bu tarz modellerde uzun kullanımda motorun ısınması sonucu etrafındaki pla yı yumuşatıp bağlandığı yatağı bozup esnetti. Buna karşı o kısmı ahşap veya ABS yapmayı düşünebilirsiniz
Zaten videoda gösterdiğim gibi motor ile motor yatağı arasında ASA ile basılmış bir plaka mevcuttur. Onun görevi motor ısısını yalıtmaktır. Diğer duvarların ise zaten motor ile teması yoktur.
Everything is great. Where can I get all these materials? Where do you buy it from Turkey? Can you help me?
hello! Thanks for your video, really great job! Could you please clarify, where did you buy the axis and corresponding saw and drill adapters?
Thanks.
All links are below the video.
Please Click "more" or "show more"
Время видео без завинчивания шурупов можно уменьшить и показать более важные узлы и моменты
Rc uçak videolarınızı izliyorum ve yapmaya çalışıyorum fakat katlamak için gerekli olan konik kesimi yapmakta çok zorlanıyorum. Nasıl yapabilirim?
Her şeyden önce maket bıçağı çok keskin olmalı. Çok kullanılmış bir uç olmamalı. Keserken yatık bir açı ile kesilmeli. Ve el alışkanlığı oluşması için bir parça üzerinde çalışılmalı.
@@Kendin-Yap teşekkürler
nice, but need baldness on the shaft
What printing settings to use? How much infill etc?
I added it to the relevant page.. www.rcpano.net/2023/09/13/how-to-make-a-useful-mini-table-saw-v2-0/
Eline sağlık ustam. Çizim size mi ait yoksa hazır siteden mi alınma. Benim elimde 220 ile çalışan daha büyük bir motor var da onu kullanabileceğim bir çizim bakıyorum sitedense oraya da bakayım
Teşekkürler. Bana ait bir tasarımdır.
Please advise where in the US I can buy one.
Matkabınız varasa bu malzemeleri alacak paranız yoksa matkap ile bir şeyler uydurun elinizde ki ler ile güzel oluyor 😅
👍
It is possible to have plans to be able to do it
Đẹp a
MAGNIFIQUE TRAVAIL
Я бы доработал чуть-чуть мерные шкалы. Сделал бы выемки для болтов на основных значения чтобы проще было их выставлять. Ещё тогда бы они при затягивании не смещались. И вместо наклейки надо печатную шкалу сделать.
С печатной шкалой есть риск, что из-за сжатия пластика при охлаждении не получится добиться нужной точности. Выемки из-за этого тоже не получится точно сделать, кроме того с ними могут возникнуть проблемы если пользователю надо выставить значение по толщине материала, например, когда предмет искомой ширины вставляется между лезвием и направляющей, и в этом положении направляющая фиксируется
@@loredan725 фигня. Все легко вычисляется. Только если принтер не только что куплен. Банально можно даже уже в готовом дырок насверлить
Hello sir nice video😅,I have a question can u tell me place in Turkey,Istanbul that I can buy from it electronics like arduino and this stuff and if I wanted a 3d printer where can u buy it from ,else than amazon cause it expensive right there and thank you for your time 😊
Hello, if possible can you provide number of printed parts on your web, filename or BOM? example the foot need to be printed 5x
Thank you
What Brand and Model is that mini Drillpress you are using in this Video?
MninQ .. The link is below the video.
24v 120w 5a led trafosu ile besleyebilirmiyim.
Evet yeterli olacaktır.
Merhabalar hocam ellerinize saglik... 24 v 100w guc kaynagi yazmissiniz detaylarda amper olarak kac amper olmasi gerekli bu konuda cok bilgim yok yardimci olurmusunuz
Önemli olan watt değeri. Amper için şu temel formülü kullanabilirsiniz. 100W / 24V = 4.16A yani 4 amper veya üzeri akım gücünü, 24V seviyesinde destekleyen herhangi bir DC güç kaynağı kullanabilirsiniz.
本当に素晴らしいのですが、デザインや寸法はありますか?
All links are below the video.
Click "more" or "show more"
BUILD BAND SAW PLS 👍😁
everything is beautiful. But I don't like the screw place where you attached your saw. Under a certain strain, that screw will pop out.
Thanks. You don't need to worry about the screw nut. The force applied in the direction of rotation of the saw blade causes the nut to tighten further. This way, no problems will occur.
@@Kendin-Yap Thank you very much for the information. By the way, thank you for sharing the links. With God's permission, I will prepare this model.
Kullandıgınız yapışkan metreleri nerden bulabilirim acaba
Malzemelerin linkleri videonun altındadır. "Daha Fazla" ya tıklayın.
Projedeki malzemeleri hesapladım. Tüm malzemeler yaklaşık 2000-2200 civarı tutuyor. Filament de dahil. Yapılmışını ve çok daha aksesuarlısını 2400 tl ye aldım. Ülkemizin şartlarında bişeyi almak yapmaktan daha az maliyetli.😔 Bu sepeten zaten üretimimiz zayıf. Yine de emeğiniz ve paylaşımınız için teşekkürler.
Ben de ona canım sıkıldı 😢
سلام عليكم اخي
هل يمكنني الحصول على هذا المنشار
اسكن في المغرب
Es posible comprar las piezas de 3D y las envien
Merhaba projenizden faydalanıp başladım yapmaya sonlarına geldim ama birkaç sorum oalcak. Besleme için xt60 konnektör koymuşsunuz beslemeyi 3s mi yoksa 4s lipo pille mi yapıyorsunuz. Ayrıca testere bıçağı bağlantı şaftı için alternatif bir çözümünüz var mı fiyatı çok pahalı çünkü
Ben Lipo ile çalıştırmıyorum. Videodaki gibi (11:47) 24V güç kaynağı kullanıyorum. XT60 Lipolara özel değildir ama Lipo pillerde çok kullanıldığı için çağrıştırması normal. XT60 soket uzun ömürlü ve güvenilir bir soket olduğu için tercih ediyorum. Eğer Lipo ile kullanmak istiyorsanız 6S ile maksimum gücü alabilirsiniz. Ama 4S bile yeterli gücü sağlar.
@@Kendin-Yap Anladım peki testere bağlantı şaftı için bir öneriniz var mı
Malesef. Testere bağlantısı çok sağlam ve güvenilir bir aparat olmak zorunda. Başka bir alternatif bilemiyorum.@@aliyoruk38
Is it just assembling?
No it is not
Please, for your own safety, do not , *EVER* cut against a fence like this. The part will get stuck between the fence and the saw and it will come flying into your face.
You can already see it happening in this videol the piece you cut off is pushed back towards you. It's a matter of time before it's in your eye.
Make the fence shorter and make the sled bigger so you can measure against the fence when the sled is closest to you, and and then hold the wood against the sled as you cut.
Seriously, on fullsize tablesaws this simple mistake has cost people eyes. fingers, hands and their lives. It's dangerous, even if you think it will be fine. It won't be fine. You only have two eyes, it's tupid to risk losing one by not researching how table saws work.
One option would be to use a 'step' fence, using a piece of wood that sits at the front of the fence to set your cut-off length, and which is no longer engaged as the work passes the blade.
A better option would be to use a sliding table with a 'back' that holds the work and prevents the cut-off from flying back in the first place. This might involve some more expense to add in linear rails and bearings of some sort for that movement.
An even better solution would be a combination. Sort of like what is used in much of the civilized world, of which I make no claim of living in.
how much? available in marketplace??
Bundan satılık var mı elinizde ?
Hayır ticaret için yapmıyorum.
Böyle bir düzeneği ücret karşılığı yapıyor musunuz ?
Hayır ben hobi olarak uğraşıyorum.
This project cost around $90 USD without including filament cost
I want to communicate with you, my teacher, may God protect you
Hello. circular saw blade not available from seller. Can you update the link? Or, Wich othe one can fit? Thanks.
Note: When "Shipped by global sellers" is selected, it appears to be in stock.
Alternatives: 60x0.4x6x120T
Other one (thicker ) 65x0.8x6x72T: s.click.aliexpress.com/e/_DD9f64V
Очень круто!
the blades that you used are no longer available on Aliexpress......do you have an alternate location that might sell them? I hve checked all over. or a different blade and blade holder?
I checked and the product is available. I think the same conditions do not apply to every country.
A blade of the following sizes can be used. You can search with this data.
Diameter 60 or 65 mm
Thickness: 05. - 0.8mm
Inner diameter: 6mm
Note: If it is possible for you to specify which country you live in, I can check the situation by selecting the country on Aliexpress.
An optional link (60x0.6x6x120T): s.click.aliexpress.com/e/_DCth5mN
But I don't know if it is valid for the country you live in.
Another note: The product's exit warehouse selection must be "Global".
@@Kendin-Yap yes it won’t ship to the US. I also tried UK and also would not ship there
When "Ship To" USA is selected, the stock seems appropriate. (sender Warehouse "Global" must be selected). I don't know why you are having trouble purchasing. Maybe you can get an explanation from Aliexpress support. @@brianpeters512
@@Kendin-Yap do you know how to make that change?? I can't find it and AliExpress has been less than helpful
Hangi 3d modelleme programını kullanıyorsunuz?
Fusion360 and Onshape
भाई हमको लेना है कितना में
How to buy?