Correct procedure is to drain / fill with the car on the level. Also to let the oil run out a little so you know when you've reached the correct level.
The TRIAX lubricant is not as popular as other well known brands but it is a great lubricant. It is mainly used in heavy machinery such as farm equipment and military vehicles. So far I have no problems with it. Seems to work fine. My car now has 67000 miles with no problems whatsoever.
You dan use a small fluid transfer pump you can buy from walmart. In my case I used it to pump air into a pastic container which contained the fluid. The fluid did not touch my pump at all. Air goes in the bottle and the fluid is forced out via the tube to the filler hole of the diff. Either way, you can use the pump to transfer the fluid. I chose my method because I use the same pump to service my cooling system which by the way I will make a video soon (as the weather permits)
Correct procedure is to drain / fill with the car on the level. Also to let the oil run out a little so you know when you've reached the correct level.
The diff was filled according to the factory recommended volume so it was very accurate.
their is a procedure in the manual to check fluid level
@@lastmanxa , yes of course but I followed the recommended volumes .
How are your thoughts so far on this oil? Is the diff working properly ? I am in beetween it and the motul 300
The TRIAX lubricant is not as popular as other well known brands but it is a great lubricant. It is mainly used in heavy machinery such as farm equipment and military vehicles. So far I have no problems with it. Seems to work fine. My car now has 67000 miles with no problems whatsoever.
What is the tool you used to get the new fluid inside? Also where can I buy it? :)
You dan use a small fluid transfer pump you can buy from walmart. In my case I used it to pump air into a pastic container which contained the fluid. The fluid did not touch my pump at all. Air goes in the bottle and the fluid is forced out via the tube to the filler hole of the diff. Either way, you can use the pump to transfer the fluid. I chose my method because I use the same pump to service my cooling system which by the way I will make a video soon (as the weather permits)
@@mainsfortes5778 awesome thank you so much for getting back to me! Can’t wait for the new video 🙂
Ma è valida anche per MY19 1.3 benzina ?
GL-5 fluid is what's recommended for the diff. That's what I used.