I added the Team AD steering Mod and it made a noticeable difference , as regards the slop in the slide rack , Just use your finger to push the front bearing up flush against the slide rack when its loosened off , then tighten the screw from the bottom through the elongated hole and push it towards the slide rack while gently nipping it up, needs checking every 10/20 hours , You need to do this even with the Team AD direct drive adapter. Feels like a much better front end with this mod.
@tiammax yes those knuckles will fit. Also the aluminum front knuckles for the Yokomo SD and RD series will also fit and is the same dimensions just in aluminum not plastic.
Hey man really nice video, I’m definitely going to buy the team AD steering mod. Why do you think the aluminium front upper arms are a must to upgrade? And if you don’t mind me asking, what electronics do you run? Thanks for the great video
@theonlysteeef thanks! The front upper aluminum arms come with some really nice ball cups that tighten up the front end alot more and removes some of the slop you get from the stock ball cups. All my electronics are Yokomo. Yokomo V2 Servo Sp3 Yokomo V4 Gyro Yokomo DX1 10.5 turn motor Yokomo RPXII ESC Only non Yokomo electronic is the receiver it's FLYSKY and came with my Noble.
4 screws on upper deck???? Lol... manual says 3 screws, and i use only 2. 2 in front plus 2 in rear. It gets some flexibility and my steering rack has no wobbles at all. It's soft tightened and works very well 😊
Nice! Do you have the limited edition MD1.0 or the other? The reason I ask is that the manuals are different depending on which you have. Limited edition has addendums for the manual that came with the other version.
@@winstonsmith8383 I'm going to my first drift comp this Saturday at RC Car World. I plan on filming the experience and posting soon after. Thanks for your support!
I'm not sure about fitment with anything specifically designed for the MD 1.0 but I know there are a ton of upgrades for the YD2 steering and battery tray.
Great stuff Eric! I love your content Brother.😊❤
Thanks homie! Appreciate you 🤘😎
Really nice car cool upgrade
@bobbylefebvre6298 thank you! 🤘
I added the Team AD steering Mod and it made a noticeable difference , as regards the slop in the slide rack , Just use your finger to push the front bearing up flush against the slide rack when its loosened off , then tighten the screw from the bottom through the elongated hole and push it towards the slide rack while gently nipping it up, needs checking every 10/20 hours , You need to do this even with the Team AD direct drive adapter. Feels like a much better front end with this mod.
Hello,
Would you know if this Yokomo Kit Up Grade 2 YD-2 Y2-OP2A Is it compatible with min Yokomo MD-10? Thank you very much.
Greetings Gaëtan
@tiammax yes those knuckles will fit. Also the aluminum front knuckles for the Yokomo SD and RD series will also fit and is the same dimensions just in aluminum not plastic.
Hey man really nice video, I’m definitely going to buy the team AD steering mod. Why do you think the aluminium front upper arms are a must to upgrade?
And if you don’t mind me asking, what electronics do you run?
Thanks for the great video
@theonlysteeef thanks! The front upper aluminum arms come with some really nice ball cups that tighten up the front end alot more and removes some of the slop you get from the stock ball cups. All my electronics are Yokomo.
Yokomo V2 Servo Sp3
Yokomo V4 Gyro
Yokomo DX1 10.5 turn motor
Yokomo RPXII ESC
Only non Yokomo electronic is the receiver it's FLYSKY and came with my Noble.
4 screws on upper deck???? Lol... manual says 3 screws, and i use only 2. 2 in front plus 2 in rear. It gets some flexibility and my steering rack has no wobbles at all. It's soft tightened and works very well 😊
Nice! Do you have the limited edition MD1.0 or the other? The reason I ask is that the manuals are different depending on which you have. Limited edition has addendums for the manual that came with the other version.
@@edriftin i have the nr: 2006 chassis
I don't think it's a limited edition 😅
@sephiroth1981 that's probably where the discrepancies in the 2 chassis are.
ayyy fireee
Thanks broski! 😎🤘
Hey man when’s the next vid dropping?!
@@winstonsmith8383 I'm going to my first drift comp this Saturday at RC Car World. I plan on filming the experience and posting soon after. Thanks for your support!
Could you do this on a yd2 zx?...
I'm not sure about fitment with anything specifically designed for the MD 1.0 but I know there are a ton of upgrades for the YD2 steering and battery tray.
make a yokomo md 2.0 video please🙏