@@TheTexasDuke I can't wait! Nice The red looks so good part of me wishes I did get it but I think when I'm fully done building I'll be happy I'm just not a red person but God it looks good
Thanks for the awesome video, srry about your luck with the axle nut, after seeing that I'm not risking it I'll go pick up the nut today m14 1.50 drain plug
I believe Altis is working on a software update to lower the temp at which power is reduced. You also could bring the battery inside to warm up. That KTM 690 Supermoto is sick man, I used to own a FS570.
@@Bengy22 yep I need to do a video going over it they said It will be a little doggle that will plug in to update and then you'll have to mail it back supposably is what they told me and should be ready I would think by now. I did try to put that email up but didn't say anything about it I forgot! What do you think Are you going to do it? Sick I always wanted one of those thanks man
@@Razorcrew_Cole I haven't made up my mind on which one to get, leaning away from the Altis though because of the weight, one guy weighed his in at 199lbs whatever happened to 185, almost 20lbs heavier than the SR has me questioning it. And I still haven't seen anyone hit the 250A claim they told you, youtuber in cali warm weather only hit 227A. Plus I just want a normal key don't like the card at all. I think I'm going to wait a bit because both bikes got a few things they need to work out though. If I get one though for sure would lower that limit even 10c is well within the ratings for those cells, I wouldn't worry about it.
@Bengy22 yeah for sure I agree and I have seen that too I'm going to question them on that as well.. eride has been known in the past for claiming wattage that they're not getting too but it looks like from what we seen it is faster which for me I'm not concerned about I want the more dirt bike geometry platform I think but I will probably get the SR down the road too You ride says they'll let me test right it within the next month if we can connect So I'm going to try to do a comparison. I agree hate the key thing seems like if I could turn it on and off for my phone I might be into that too there is some features I'd like both ways waiting to hear back on an email from them for some questioning to do a video talking more details from both companies too.
@@Razorcrew_Cole Yeah for sure need to get both bikes side by side for the full picture. Doesn't help both Eride and Altis ignored my question emails. It would be great to hear a comparison when you have seat time on both if eride do get you one. See I'm going to be on the road for a huge majority of my riding, just don't have anywhere to ride. That's also why I lean towards SR don't need the gearbox. I look forward to more content once you get that axle nut
@Bengy22 appreciate it, hopefully either way I'll be able to test the SR I have a wrap that says we might be able to meet up when he can but will be a little still So I'm sure someone else will be able to do it sooner. Appreciate the support man
@Razorcrew_Cole it was a video of the assembly along with that they had the torque specs typeed at the bottom of the video as they were tighten the appropriate screws. I litteraly took screen shots for all screws so I could reference it later.
@@phat56pat yeah I personally absolutely hate the owner of electro and Co we've had beef since before he was a company so I will never give him a dime, I have been messaging and pushing e-ride to turn it up to match the specs. I just see so many of my followers have issues with all their parts for multiple years and can't support it personally. What's that said I don't think it's a terrible option but most of people putting videos out are sponsored by them so that's what they're known for is paying people to give five-star reviews as well
NICE Dude.... I'm Happy AF for you!!!!!! I'ma order this one, the Ventus bike one, or the 3.0 SHIT maybe a MX5...? decisions, decisions, DECISIONS I'm SURE this video will be VERY informative......
@@rockydotson31 yeah I feel you man, I'm going to try to start going through all those bikes and get them in the garage to give everyone my thoughts side by side. Send what not hopefully grow the channel! Appreciate it
@@masonsickler6265 It looks interesting but kind of underbuilt for the power of their claiming I would love to get my hands on one to check in person for sure looks cool
@@TV-xl6yw mine connected for that first time in my video showing you guys connecting it and now I haven't been able to connect so I'm trying to talk to them to see what's up
@Razorcrew_Cole maybe the same thing happened to me..when i was having trouble with the display that was the firts thing they recommend me to do .. the update... . thanks
@TV-xl6yw yeah I did do the update right away I guess before I even rode it I was able to turn the bike off with the app but not on and now I can't connect though because I would like to just use my app to turn it off and still pulling the key out of my pocket cuz if I get off the bike usually I'm getting my phone out
@@Jdees209 I ordered in February but I was able to get it sooner because I am putting out some content for them. So I went from second batch to First batch which should have only been a week or two earlier
@Jdees209 I'm not sure because those are new I'm not 100% if they are stocking them. When I talk to eroy they are saying they're hard to get still not fully out. Go ahead and give them a call their phone number is posted on the website Jay should answer or you can text
Honestly the 28kw 50ah ventus is kind of worth it now for $5,800. It’s got way petter suspension, wheels as well as other components, than it used to have and just the coveted amazing tune/throttle that the ventus power train gives you and only at 155lb. What you think?
@Joshdrinkswater I hope to try to snag one this summer cuz I'm curious about it, I think it looks like a good bike for sure I just don't know if I would want that much power with that platform
I wrote Atis about providing the Torque specs for the bike to NOT break the axle nut and other various things. I was told they would put it on the website. No luck finding it yet but if you had it would it be helpful?
Yeah I know I haven't told a few things by them that it will happen and their little delayed I think they're just so overwhelmed and busy but I'm with you I need to get it out I'm waiting for them to email back about me snapping it and that same question lol I had one I tried it's too big I have one coming tomorrow I think and hope is right but who knows pry not
@@robertmccaleb1400 yeah I guess I don't know what you call it but I snapped it.. I should have used a torque wrench or just not cranked it so tight so be careful cuz I know another TH-cam guy that did it! I'll try to give an update What I get I just got a few in with their wrong different one comes tomorrow
@ you are a big guy I only weigh 143 pounds 5.5 and older so I will end up buying a motorcycle lift don’t bend over well or squat I would be crying in pain
@robertmccaleb1400 yeah I am just so used to working on the razors I guess It doesn't bother me I'm pretty quick and I do have like a workbench table I just pull them up on the table to work a lot cuz it can be a back killer for sure lol
@@bthunder9292 yeah I mean like anything you're not supposed to just randomly tighten it I'm used to my razors where we just crank those axle down because they don't have clamps like normal forks So I knew better just didn't feel like buying a torque wrench so that was dumb
You need to remember iam a retired tig welder machine tool and aluminum fabricator and built gsxr 1994 750 to a 907 stage two yoshamira kein flat slides
@@phat56pat yeah for me it's weird to not have an app like that's how I've always built bikes first thing you have to do is run auto-learn and set settings so I wanted to see what it's all about super basic but I think they're adding more and more as time goes on I was able to just shut the bike off with the app which is interesting
@ wait what? Surron, talaria, rerode eride I could go on don’t have apps for the bikes… you have built on aftermarket controllers… this is oem there will be features in app in the future but don’t expect much.
@@rockydotson31 Altis shows they Got through customs and then within about 4 days HyperRides had it sent out and I got an email with some shipping info. And then about For business days I got a email saying to call or email to schedule a drop off time for the next day or after
You’re welcome!good morning cole I have been waiting for the Altis Sigma for 30 years
@@robertmccaleb1400 😆 me too I swear lol That's why I had to put the part of me sayin I waited my whole life for this lol
The only review that shown the settings and setup! Great video!
@@Vesataeuc I really appreciate that thank you
Perfect job on the video very informative.
@@TheTexasDuke Thank you for that feedback and taking the time for the comment much appreciated helps make it feel worth all the time
Dude you’re going to love it I got the red one! ❤
@@TheTexasDuke I can't wait! Nice The red looks so good part of me wishes I did get it but I think when I'm fully done building I'll be happy I'm just not a red person but God it looks good
Thanks for the awesome video, srry about your luck with the axle nut, after seeing that I'm not risking it I'll go pick up the nut today m14 1.50 drain plug
@@alexsuchanek5553 yeah I mean I cranked it pretty hard You can see Thanks I appreciate that feedback
The Altis Finally Kame. To bad you ain't in LA.
I believe Altis is working on a software update to lower the temp at which power is reduced. You also could bring the battery inside to warm up. That KTM 690 Supermoto is sick man, I used to own a FS570.
@@Bengy22 yep I need to do a video going over it they said It will be a little doggle that will plug in to update and then you'll have to mail it back supposably is what they told me and should be ready I would think by now. I did try to put that email up but didn't say anything about it I forgot!
What do you think Are you going to do it?
Sick I always wanted one of those thanks man
@@Razorcrew_Cole I haven't made up my mind on which one to get, leaning away from the Altis though because of the weight, one guy weighed his in at 199lbs whatever happened to 185, almost 20lbs heavier than the SR has me questioning it. And I still haven't seen anyone hit the 250A claim they told you, youtuber in cali warm weather only hit 227A. Plus I just want a normal key don't like the card at all. I think I'm going to wait a bit because both bikes got a few things they need to work out though. If I get one though for sure would lower that limit even 10c is well within the ratings for those cells, I wouldn't worry about it.
@Bengy22 yeah for sure I agree and I have seen that too I'm going to question them on that as well.. eride has been known in the past for claiming wattage that they're not getting too but it looks like from what we seen it is faster which for me I'm not concerned about I want the more dirt bike geometry platform I think but I will probably get the SR down the road too You ride says they'll let me test right it within the next month if we can connect So I'm going to try to do a comparison.
I agree hate the key thing seems like if I could turn it on and off for my phone I might be into that too there is some features I'd like both ways waiting to hear back on an email from them for some questioning to do a video talking more details from both companies too.
@@Razorcrew_Cole Yeah for sure need to get both bikes side by side for the full picture. Doesn't help both Eride and Altis ignored my question emails. It would be great to hear a comparison when you have seat time on both if eride do get you one. See I'm going to be on the road for a huge majority of my riding, just don't have anywhere to ride. That's also why I lean towards SR don't need the gearbox. I look forward to more content once you get that axle nut
@Bengy22 appreciate it, hopefully either way I'll be able to test the SR I have a wrap that says we might be able to meet up when he can but will be a little still So I'm sure someone else will be able to do it sooner.
Appreciate the support man
Sick...! Enjoy
@@TV-xl6yw Much appreciated
The only other options are Emotion eclipse XR same motor and the new trials bikes
RevRides put out an entire build with torque specs for all screws and bolts on the Altis
@@edgurash834 No way they did like a video or actually specs?! Thanks for dropping the comment
@Razorcrew_Cole it was a video of the assembly along with that they had the torque specs typeed at the bottom of the video as they were tighten the appropriate screws. I litteraly took screen shots for all screws so I could reference it later.
@edgurash834 Awesome thank you for letting me know that I can help pass it on to those who ask as well!
Go with the rtr not the eride also eride isn’t even out. Also take the battery inside and charge it warm it up well
@@phat56pat yeah I personally absolutely hate the owner of electro and Co we've had beef since before he was a company so I will never give him a dime, I have been messaging and pushing e-ride to turn it up to match the specs.
I just see so many of my followers have issues with all their parts for multiple years and can't support it personally. What's that said I don't think it's a terrible option but most of people putting videos out are sponsored by them so that's what they're known for is paying people to give five-star reviews as well
@ odd the rtr is bad ass
NICE Dude.... I'm Happy AF for you!!!!!! I'ma order this one, the Ventus bike one, or the 3.0 SHIT maybe a MX5...? decisions, decisions, DECISIONS I'm SURE this video will be VERY informative......
@@rockydotson31 yeah I feel you man, I'm going to try to start going through all those bikes and get them in the garage to give everyone my thoughts side by side. Send what not hopefully grow the channel!
Appreciate it
whats your opinion on the "ventus one"
@@masonsickler6265 It looks interesting but kind of underbuilt for the power of their claiming I would love to get my hands on one to check in person for sure looks cool
Been having trouble with my bikes bluetooth. Have not been able to connect to my phone.
@@TV-xl6yw mine connected for that first time in my video showing you guys connecting it and now I haven't been able to connect so I'm trying to talk to them to see what's up
@Razorcrew_Cole maybe the same thing happened to me..when i was having trouble with the display that was the firts thing they recommend me to do .. the update... . thanks
@TV-xl6yw yeah I did do the update right away I guess before I even rode it I was able to turn the bike off with the app but not on and now I can't connect though because I would like to just use my app to turn it off and still pulling the key out of my pocket cuz if I get off the bike usually I'm getting my phone out
When did you order your bike ? And how long did it take ? To get home
@@Jdees209 I ordered in February but I was able to get it sooner because I am putting out some content for them. So I went from second batch to First batch which should have only been a week or two earlier
@Razorcrew_Cole oh that's tight we aren't in February yet though ? Lol you just know some people that's tight
I was thinking about ordering my SR from this company but I wanted to know how long it would take probably like 2 weeks you think or more?
@Jdees209 😂 I ment November
@Jdees209 I'm not sure because those are new I'm not 100% if they are stocking them. When I talk to eroy they are saying they're hard to get still not fully out.
Go ahead and give them a call their phone number is posted on the website Jay should answer or you can text
Honestly the 28kw 50ah ventus is kind of worth it now for $5,800. It’s got way petter suspension, wheels as well as other components, than it used to have and just the coveted amazing tune/throttle that the ventus power train gives you and only at 155lb. What you think?
@Joshdrinkswater I hope to try to snag one this summer cuz I'm curious about it, I think it looks like a good bike for sure I just don't know if I would want that much power with that platform
@@Razorcrew_Coleventus has worse wheels and worse frame and worse brakes speed and torque is too much to handle lol got one here
@blacksandyt Thanks for the comment, that's my exact thoughts on it!
He11 yeah man enjoy you earned it! 🤙
@@ghastly545 yo I really appreciate that
(EKX X21Max )Segway makes some thing better but Emove 2 is a flat board with 2 hub motors
I wrote Atis about providing the Torque specs for the bike to NOT break the axle nut and other various things. I was told they would put it on the website. No luck finding it yet but if you had it would it be helpful?
Yeah I know I haven't told a few things by them that it will happen and their little delayed I think they're just so overwhelmed and busy but I'm with you I need to get it out I'm waiting for them to email back about me snapping it and that same question lol I had one I tried it's too big I have one coming tomorrow I think and hope is right but who knows pry not
I found a lift black widow pro lift pneumatic and hydraulic
I’m kinda a dork! Frogy looks I will be buying a Emove2 eventually and a different hub motor model 60volt 30 ah with the 3000 watt motor
@@robertmccaleb1400 I'm not even familiar with that one I don't have to check it out
You said you snapped clinch bolts on forks?
@@robertmccaleb1400 yeah I guess I don't know what you call it but I snapped it.. I should have used a torque wrench or just not cranked it so tight so be careful cuz I know another TH-cam guy that did it! I'll try to give an update What I get I just got a few in with their wrong different one comes tomorrow
You were in a difficult position and not relaxed off balance
@ you are a big guy I only weigh 143 pounds 5.5 and older so I will end up buying a motorcycle lift don’t bend over well or squat I would be crying in pain
@ it’s not easy fix
@robertmccaleb1400 yeah I am just so used to working on the razors I guess It doesn't bother me I'm pretty quick and I do have like a workbench table I just pull them up on the table to work a lot cuz it can be a back killer for sure lol
Damn Bruh You like the 3rd person I heard that has had that problem
@@bthunder9292 yeah I mean like anything you're not supposed to just randomly tighten it I'm used to my razors where we just crank those axle down because they don't have clamps like normal forks So I knew better just didn't feel like buying a torque wrench so that was dumb
I ordered one because I feel the same way
@@robertmccaleb1400 👌👌👌
You need to remember iam a retired tig welder machine tool and aluminum fabricator and built gsxr 1994 750 to a 907 stage two yoshamira kein flat slides
Don’t even connect to the app as it’s only for a update the Mx doesn’t need the update
@@phat56pat yeah for me it's weird to not have an app like that's how I've always built bikes first thing you have to do is run auto-learn and set settings so I wanted to see what it's all about super basic but I think they're adding more and more as time goes on
I was able to just shut the bike off with the app which is interesting
@ wait what? Surron, talaria, rerode eride I could go on don’t have apps for the bikes… you have built on aftermarket controllers… this is oem there will be features in app in the future but don’t expect much.
Just for reference, how tall are you? How much do you weigh?
I'm 6'3 and right around 190 - 200 lb
Im torn between this bike and ventus one. Maybe ventus its $100 cheaper.
@@philipnesmith yeah I want to get that bike so I can compare them for sure along with the SR
HOW LONG DID IT TAKE TO SHOW UP?
@@rockydotson31 Altis shows they Got through customs and then within about 4 days HyperRides had it sent out and I got an email with some shipping info. And then about For business days I got a email saying to call or email to schedule a drop off time for the next day or after
Every one does
u could just weelie everywhere jk
@@gabe1392 trust me it has crossed my mind 😆😂😂
Watch E Ride release the Toyota Camry equivalent for $2,999 before June.
😆😂😂