Be sure to Anchor it to the slab guys. Once concrete is cured anchors need to be installed. A good strong wind storm and the paint booth will be next door.
For anyone that does car repairs we all know getting your own paint booth and a space to work on your projects is a dream come true congratulations guys 👏
If you haven't done so; make sure you anchor it down. Also silicone (seal) all around the base to the cement. You don't want rain to build up under it and raise the humidity. I'd also consider a peaked roof so water can't pool up on it too. You could make a large overhang above the fans to help protect them also.
When you silicone gaps, make sure you go back with some winded in a bowl and dip your fingers in it after you wipe the excess from the gaps. You guys have it all globbed on there.
Probably the happiest and most excited I’ve seen Eleazar in awhile. You guys got a whole compound going on! Now you can move the frame machine beside the paint booth and have more room inside for the toys!
@@whumphagreed, a building over top is a must. Great investment for the property and for protecting their other investments. Either a nice metal building or if they wanted to “up the ante” they could build something out of brick/block/stone. I’m not sure how things work in TN but If I’m not mistaken having a masonry building on your property increases the value as it’s considered a permanent structure and built to be stronger and more weather proof than wood or metal.
They said they're putting a Carport over it,and some of the slab.Once Simeon's place is done,he'll move a couple rides there.He has a 4-5 car garage there.They Won't be putting the frame machine outside.
Paint booth is looking great - Would be a major benefit to the back and forth from the main building to build another room off the rear for a paint store/ mixing room. - Paint the ramps underneath, looks like bare steel, and won't be long before the rusty water starts to spread over the concrete. -Paint a roof sealer on the outside of the roof, protect the longevity of the Silicon sealer and assist with leak protection
So great to see how far you have guys have come and your Pops involved every step of the way. Lost my father this year and its great to see your pops so happy to always be helping you guys. Been a fan since the corvette under the tent in the driveway
Love your channel 2 young men putting in the work nice to see, I am 60 and still love building cars and now I am teaching my son and he loves it we both watch your channel every day , great content great people , pops is a work horse
So amazing seeing you guys finally getting your own paint booth, now you’ll always have a clean and readily available booth. Looking at what seems to a fair amount of rust on that whole motor housing and motor shafts I’m hoping you got a decent price. Very happy for you guys! 👍👏
It's because their eastern European Immigrants they all seem to have close family's. Their parents came here and raised them right. Ukrainians are good people
Congrats on having your own paint booth. It's absolutely incredible how far you've come over the past few years. I started watching you before you had the garage at your Mom & Dad's house. You would set up a canopy over the car you were working on to stay out of the sun. Excited to see where your continued hard work and dedication takes you going forward.
Guys I am just in absolute awe of what you guys can do!! You built homes, very complicated cars, your workshop and now a paintbooth!! Truly high 5s and salutations to you! Amazing!! Have been following you guys in silence since the built of Pop's Dodge truck! Each project is mesmerizingly interesting although admittedly at the beginning of each, not sure if possible but, its always completed! Congrats!!
He said “that sucker was just absolutely salvaged” 🤣🤣🤣🤣🤣🤣🤣 I started dying laughing I was waiting to see what y’all said about it and that was funny asf
THIS building will be the greatest addition to the Goonzquad industrial complex. You guys have done so many amazing things in your short time and it has been well worth it I am sure.
Soooo happy for you guys!! Just make sure you do get a pro electrician. Great seeing ur dad enjoying food in the Porsche!!! That was awesome!!! Glad you posted! Can't wait for the next 1! Keep up the great work!! Can't wait for an update on the R8. Make sure you always have a good time!! 👍👍👍😊😊😊🙌🙌🙌🙏🏻❤
I recommend you coat that shiny roof with "silver RV paint" great protective and cuts down on reflective properties so it doesn't interfere with Aircraft flying over. yes, that is a thing. love the booth. what an upgrade.
@@jpquebec123 What does your PPL have to do with common sense, a reflective surface blaring into the sky near or within range of operation airfield should be minimized to not allow glare to interfere with Aircraft in the area, now has been several years sense i read this cation, but it does exist. so, you're saying that reflective glaring object reflected into your vision while flying wouldn't bother you. the risk is low, but still a risk. Also, the paint would help reduce the heat that tin box is going to absorb and weatherproof it. 99% of all paint booths that I've seen installed are in doors. under watertight building.
Guys the paint booth needs to be in a building, they are not meant to exposed to the elements, not to mention it will be literal oven in the summer, the paint will flash before it hits the surface, and in the winter just the opposite, the paint booth y'all used in the past is enclosed for a reason , mainly to have a stable environment to paint, and if you haven't already you may need a small source emissions permit for the paint booth, depending on state environmental laws
@@tnolan3176 Still need to check on that, the fines the DEQ levels for non compliance is in the thousands and they will enforce it, speaking from my position at my facility
Congratulations guys well deserved. Now you need to build a paint mixing room, with the paint shaker machine, that always keeps the paint shook up, & sponsored by PPG and Sickens!
Hard work will reward you! Good for you, boys ! The best part of this channel is that it's a family affair. A father and his 2 sons. Boys taking care of their old man with their hard work.
Congrats on the new paint booth. I've been watching you guys since the Mustang build. You guys always rock!! I enjoy the content very much. (I'm stationed in Japan, Military, so I cant really get anything from the Goonzquad store, Im not sure if you ship overseas, but I enjoy the content all the same). Keep being awesome!
No doubt you guys came so very far, and we’re proud of y’all, but I just wanted to extend a very special thanks from your loyal fans that purchased from the store right away. The first hour the giveaway went live. You know? Before the X entries and complimentary gifts… That’s just how it is, I guess! I’ll remain a loyal subscriber and I will like the videos, because I do enjoy them, but I sure learned my lesson about these giveaways. I’m happy to just buy a pack of index cards next time.
Let’s go!!! I’ve been watching you guys for a while now, since yall were working from your parents garage. To the house yall remodeled, Now yall have your own paint both! Sheeeesh!
Will those filter grates support a car ? Also if the air flow in the booth is a down draft the flters in the floor need turned over. The air flow should hit the white side first. Keep up the good content !
Although this may be true, it’s not a good idea to assume the orientation of the filters based on colour, without first consulting the filter media specifications.
My first impression would be the filters shouldn't be under the wheels. Maybe they were supposed to go along the wall and the three sections in the middle would have the flat steel panels.
@@danielmarek4609hat’s exactly where you want it ( near the middle) so when you bag a car it pulls the sheet to the car like a vacuum you don’t want it near the sides as it will make the sheet flap off the job
WHOOOHOOO FIRST COMMENT, LOVE YOU GUYS!! 🎉 Absolutely crazy to think of how far y’all have come to the even crazier builds your working on now! Been supporting y’all for a while now and never disappointed, always quality, living the absolute dream!
So proud of y’all I remember when I first started watching when the video is you were on the side of the road with the RV on fire and the guy got mad at you. It’s been a minute but y’all are great. Keep up the good work.
Wow this is really another great milestone achievement in your continuous build journey. Hard work is paying big dividends and that sure looks like a 1st class paint booth to me. Might need to get someone to bore a hole under your driveway to run the electric cable unless you cut it open from the top. Nice money maker!
I've seen them outside but generally under a lean-to attached to the main shop. Main reason people don't have them outside is you have to push a bare steel car from the main shop into a paint booth without getting it wet or dusty or contaminated with tree sap and whatever which means you can't transfer a car in humidity, rain or wind.
You know that flat roof is going to be a big problem. No where for rain and snow to run off. That booth was meant to be installed inside a building. You need a canopy over the entire building and fan housing. Maybe even a shell over the whole project. You need some professional advice before it’s too late and more expensive.
That cloth covering on the wire is fireproof anti-static covering. I would also recommend using a treated 2x6 stood on edge in the center of the roof then install rockwool insulation in the channels of the roof topped with regular metal roofing panels from center 2x6 to the edges with 6 inch overhang to have a slanted secondary roof that will keep the rain from building up and provide good insulation in the winter.
Not sure why you wouldnt take the time to move one light panel to the other side and swap a couple other panels around so the light is distributed evenly across the booth with 4 light panels on each side.
Because they don’t care. It will probably have to come down since I doubt they got a permit for that huge concrete slab messing up all the drainage that the county made them setup.
I'm not sure if the walls are magnetic but I recommend covering the walls with paper and using magnets to hold them up as an extra layer of protection. I work in a paint booth, and that's the way we do it because the spray on stuff can be hard to remove. Love the videos cannot wait to see the builds go right into paint after body work!!!!
Look absolutely sick guys!!, you guys have come a long ways from where yall were, keep up the awesome work, can't wait to see this and the Lamborghini finished!!
Hope you guys build some kind of shed around the paint booth so it's not exposed to the elements. Doesn't look like it would fare well after a few hard storms.
I said the same thing, how do they control the environment, instead Temps will be through the roof with the Sun beating down on that roof and what about the Winter.
@nitebird500 they order everything from China. Nothing against China. They supply a demand. I just don't know why these boys spend stupid money on a dodgy fibreglass body kit then cheap out on a paint booth that's already started to rust in shipping.
Guys, just getting caught up on your show and hear you reference “silicone” rather than Caulk. Don’t use silicone as it is a fish eye generator and you need to use silicone free caulk. Don’t want to be the bearer of bad new but do not use silicone!!!!!
The paint booth looks great. I hope the sealant holds up to the weather. Suggestion...spray the roof with white truck bedliner. It will weatherseal it and it will reflect a lot of the heat from the sun.
Exhaust Filters are in backwards! Flip them and they will last 4x longer. Own a filter service and supply company that maintains about 50 booths a month
Hope you secure that to the ground/pad. A big storm will pick it up and destroy it. Also, secure the ramps, drive tires could spit those ramps out pulling a car in.
I am so happy for you guys, you all deserve it, your own epic paint booth. Man that Lamborghini Aventador is gonna look freaking sick. Nice job, i hope you do the electrical work as well.
Coming along nicely, boys! Do you think it would have been better to have the side door on the other side? It could attach to a little paint-mixing shed. Oh well, it's already assembled! Looks great.
Super happy for you guys.....But I really hope you read some of these comments. There is a lot of helpful info from the filters being upside down to anchoring to it needing to be under another structure to it needing FRESH air in and bad air out. Please follow some of this advice....your return on investment will be a waste if you don't. You youngsters kick ass and are motivated to the moon but patience is a virtue! Good Luck Boys!!
I still believe that paint booth was meant to be set up inside a garage. Pretty sure its not 100 percent weather tight. One option is get a couple of short sea cans and place one to each side of the booth and have trusses built and cover it with a roof and build a back wall. With sea cans this will give you parts storage and whatnots, and the other can could be used as the paint storage and prep/mixing area.
shouda done the building first that booth galvanised or not WILL rust all the holes , cuts n screws even the sheet.. i worked wiv this stuff most o me working life. wait see
What about the spray gun, doesn't the paint gun need air pressure from a compressor, so the paint booth could have been built inside a larger prefab steel building, with the paint booth off to one side, and maybe a couple more of those three vehicle hoists, to store more of their builds.
What a great investment guys. That paint booth looks amazing. I'm sure it will bring you great content, in the future, and it will be so convenient for you future videos. Well done!
I would’ve preferred to have it installed by professionals for the additional 10k, I admire your approach to take it on yourselves. However, you should have left space to the door to add an airlock room where you can enter and exit into for mixing, waiting, storage, supplies, etc. Also a must to anchor the booth now it’s built to prevent shifting under heavy wind. Also I hope they install identical lights on the walls to make it symmetrical as it would bother me especially if it’s a private paint booth. (Also Important to have equal lighting for the painting process) excited for this day to be here but that’s just my observation. Lastly please becareful with the electrical as Simon was correct about flammability. Good luck boys, excited for the next episode.
Hey make sure you bond the base with a ground because air flow will cause static pressure which causes static shock and static shock can be big enough to ignite paint vapor. So please install ground rods and run a ground and bond the floor frame. Great work keep it coming.
Great to see the booth nearly finished guys.But i didn’t notice you bolt the ramps to the booth.I’m guessing you did off camera tho.Looking forward to seeing it complete and fully wired up.That first flick of the “ON” switch should be epic.Keep the videos coming guys.Great viewing
Be sure to Anchor it to the slab guys. Once concrete is cured anchors need to be installed. A good strong wind storm and the paint booth will be next door.
fr
Lol, for sure I know they will take care of that.
I’m sure they haven’t done it because the city will make them take it down without a permit
Let it fall
@@fuckused7735dayum what did they do to you?😭
I don't always want to see indoor paint booths built outdoors, but when i do, i tune in to goonzquad! lol
This blows my mind. How can you build a larger structure around it? You would need to repour a slab, and do the grading. What a shitshow.
For anyone that does car repairs we all know getting your own paint booth and a space to work on your projects is a dream come true congratulations guys 👏
If you haven't done so; make sure you anchor it down. Also silicone (seal) all around the base to the cement. You don't want rain to build up under it and raise the humidity. I'd also consider a peaked roof so water can't pool up on it too. You could make a large overhang above the fans to help protect them also.
Carport is coming.
Steel building coming soon 45x45 feet
When you silicone gaps, make sure you go back with some winded in a bowl and dip your fingers in it after you wipe the excess from the gaps. You guys have it all globbed on there.
I dont think this booth is meant to be outside like this ! Plus how are they going to control the heat ?
dam we have a genius on TH-cam. who would have ever thought to anchor down a building on a concrete slab
Probably the happiest and most excited I’ve seen Eleazar in awhile. You guys got a whole compound going on! Now you can move the frame machine beside the paint booth and have more room inside for the toys!
not bad of an idea honesly, only if they cover all the new fresh concrete
Genius idea on the frame machine if they get a cover
@@whumphagreed, a building over top is a must. Great investment for the property and for protecting their other investments. Either a nice metal building or if they wanted to “up the ante” they could build something out of brick/block/stone. I’m not sure how things work in TN but If I’m not mistaken having a masonry building on your property increases the value as it’s considered a permanent structure and built to be stronger and more weather proof than wood or metal.
They said they're putting a Carport over it,and some of the slab.Once Simeon's place is done,he'll move a couple rides there.He has a 4-5 car garage there.They Won't be putting the frame machine outside.
@@bryduhbikeguyyes they’ll need the extra security I think!
Pops got the gloves and headband on. Now I know you guys are in good hands! Much love and respect for Pops.
Paint booth is looking great
- Would be a major benefit to the back and forth from the main building to build another room off the rear for a paint store/ mixing room.
- Paint the ramps underneath, looks like bare steel, and won't be long before the rusty water starts to spread over the concrete.
-Paint a roof sealer on the outside of the roof, protect the longevity of the Silicon sealer and assist with leak protection
They said they were going to build a building to cover the paint booth and part of the slab ! Dont understand why they wouldnt do that first !
I love how pops is just chillin like a villain in that Porsche eating a lettuce burger 😂
? What is pop's name
Thats all that unfinished car is good for now !!
@@frankcrenshaw7343 AKA KING
@@frankcrenshaw7343 His name is Yury
@@frankcrenshaw7343Putin
Great content
You guys should build a small room attached to the paint booth for all of your paint supplies
They should of put the side door on the other side so the room could attach at that point for them to walk through after mixing etc..
Something is in the works there trying to buy a building or a car port to go over top of all of it.
Yup - 80-90%, but never 100%.
this is not meant to be outside lol
So great to see how far you have guys have come and your Pops involved every step of the way. Lost my father this year and its great to see your pops so happy to always be helping you guys. Been a fan since the corvette under the tent in the driveway
Loving the content! Been watching since the mustang, y’all’s dedication and hard work is incredible, keep it up guys
Love your channel 2 young men putting in the work nice to see, I am 60 and still love building cars and now I am teaching my son and he loves it we both watch your channel every day , great content great people , pops is a work horse
So amazing seeing you guys finally getting your own paint booth, now you’ll always have a clean and readily available booth. Looking at what seems to a fair amount of rust on that whole motor housing and motor shafts I’m hoping you got a decent price. Very happy for you guys! 👍👏
A pain booth would be horrible
@@FastLaneLyfe Haha yes it would
Hi guys am touched by your relationship with your dad, it's so amazing how he supports you in everything you do guys. This is a dream teams 🎉
It's because their eastern European Immigrants they all seem to have close family's. Their parents came here and raised them right. Ukrainians are good people
@@Snackz11 I agree 100% we are praying for the war to end ASAP. 🙏
You guys are something else. No one can do this without a deep pocket to spend on parts, tools and place.
Congrats on having your own paint booth. It's absolutely incredible how far you've come over the past few years. I started watching you before you had the garage at your Mom & Dad's house. You would set up a canopy over the car you were working on to stay out of the sun. Excited to see where your continued hard work and dedication takes you going forward.
I honestly love the way you will give anything a go, and pops is always there to help love this channel ❤️
Guys I am just in absolute awe of what you guys can do!! You built homes, very complicated cars, your workshop and now a paintbooth!! Truly high 5s and salutations to you! Amazing!! Have been following you guys in silence since the built of Pop's Dodge truck! Each project is mesmerizingly interesting although admittedly at the beginning of each, not sure if possible but, its always completed! Congrats!!
He said “that sucker was just absolutely salvaged” 🤣🤣🤣🤣🤣🤣🤣 I started dying laughing I was waiting to see what y’all said about it and that was funny asf
THIS building will be the greatest addition to the Goonzquad industrial complex. You guys have done so many amazing things in your short time and it has been well worth it I am sure.
I can't wait to see the epic paint jobs that come out of that booth!!
Soooo happy for you guys!! Just make sure you do get a pro electrician. Great seeing ur dad enjoying food in the Porsche!!! That was awesome!!! Glad you posted! Can't wait for the next 1! Keep up the great work!! Can't wait for an update on the R8. Make sure you always have a good time!! 👍👍👍😊😊😊🙌🙌🙌🙏🏻❤
Congrats on the new paint booth. You boys have come along way, since I first started wathing you..
I recommend you coat that shiny roof with "silver RV paint" great protective and cuts down on reflective properties so it doesn't interfere with Aircraft flying over. yes, that is a thing. love the booth. what an upgrade.
@@jpquebec123 What does your PPL have to do with common sense, a reflective surface blaring into the sky near or within range of operation airfield should be minimized to not allow glare to interfere with Aircraft in the area, now has been several years sense i read this cation, but it does exist. so, you're saying that reflective glaring object reflected into your vision while flying wouldn't bother you. the risk is low, but still a risk. Also, the paint would help reduce the heat that tin box is going to absorb and weatherproof it. 99% of all paint booths that I've seen installed are in doors. under watertight building.
I really enjoy watching you're new longer format !!
This is so sickkkkkkk if you have been here from the beginning of goonzquad you know this is Sooooo sick. You guys have done it you have it all!!!!!🙏
Guys the paint booth needs to be in a building, they are not meant to exposed to the elements, not to mention it will be literal oven in the summer, the paint will flash before it hits the surface, and in the winter just the opposite, the paint booth y'all used in the past is enclosed for a reason , mainly to have a stable environment to paint, and if you haven't already you may need a small source emissions permit for the paint booth, depending on state environmental laws
they are actually building a structure around it.
I agree with everything you said.
Permits permits we dont need no stinking permits !!
@@tnolan3176
Still need to check on that, the fines the DEQ levels for non compliance is in the thousands and they will enforce it, speaking from my position at my facility
@@magi115 lol if they are building a structure around it why would they pour a slab barely large enough for the booth.
Pops just being a BOSS. eating a lettuce burger in the Porsche?!?! Flex on everybody pops!!!
Congratulations guys well deserved. Now you need to build a paint mixing room, with the paint shaker machine, that always keeps the paint shook up, & sponsored by PPG and Sickens!
And a compressor room ! This thing is a long way from being completed !
Always great to see the boys and Pops working together. Enjoying the channel. Tks for sharing
Quite the accomplishment, long way since I watched you guys rebuild that mustang way back... wow!!
Hard work will reward you! Good for you, boys ! The best part of this channel is that it's a family affair. A father and his 2 sons. Boys taking care of their old man with their hard work.
Thank you for all the good content. Keep it up guys!
It’s so awesome getting a front row seat to watch two brother build an empire and a legacy for generations to come. Keep on keepin on brothers! ❤
I’ve literally have watched you since the atv and bike days y’all never disappoint on the conten🔥
Congrats on the new paint booth. I've been watching you guys since the Mustang build. You guys always rock!! I enjoy the content very much. (I'm stationed in Japan, Military, so I cant really get anything from the Goonzquad store, Im not sure if you ship overseas, but I enjoy the content all the same). Keep being awesome!
Man y’all are doing great 👍 congratulations on all the progress!
No doubt you guys came so very far, and we’re proud of y’all, but I just wanted to extend a very special thanks from your loyal fans that purchased from the store right away. The first hour the giveaway went live.
You know? Before the X entries and complimentary gifts…
That’s just how it is, I guess! I’ll remain a loyal subscriber and I will like the videos, because I do enjoy them, but I sure learned my lesson about these giveaways. I’m happy to just buy a pack of index cards next time.
You can see light getting in all around the top. If light can get in so can dirt and moisture. You have a lot of sealing to do.
I was thinking the same. And that's not even a small gap.
Let’s go!!! I’ve been watching you guys for a while now, since yall were working from your parents garage. To the house yall remodeled, Now yall have your own paint both! Sheeeesh!
Will those filter grates support a car ? Also if the air flow in the booth is a down draft the flters in the floor need turned over. The air flow should hit the white side first. Keep up the good content !
watch them ignore this advice lol
Yes, white on top and green on bottom.
Although this may be true, it’s not a good idea to assume the orientation of the filters based on colour, without first consulting the filter media specifications.
My first impression would be the filters shouldn't be under the wheels. Maybe they were supposed to go along the wall and the three sections in the middle would have the flat steel panels.
@@danielmarek4609hat’s exactly where you want it ( near the middle) so when you bag a car it pulls the sheet to the car like a vacuum you don’t want it near the sides as it will make the sheet flap off the job
Pops eating in the Porsche😎 legendary
WHOOOHOOO FIRST COMMENT, LOVE YOU GUYS!! 🎉
Absolutely crazy to think of how far y’all have come to the even crazier builds your working on now! Been supporting y’all for a while now and never disappointed, always quality, living the absolute dream!
So proud of y’all I remember when I first started watching when the video is you were on the side of the road with the RV on fire and the guy got mad at you. It’s been a minute but y’all are great. Keep up the good work.
Wow this is really another great milestone achievement in your continuous build journey. Hard work is paying big dividends and that sure looks like a 1st class paint booth to me. Might need to get someone to bore a hole under your driveway to run the electric cable unless you cut it open from the top. Nice money maker!
So glad you guys went back to normal. Thank you.
It's great to finally see your owne paint booth. Good job guys 🎉
You guys are awesome! Your work ethic never ceases to astound me!
love the content guys!!!! keep on building your dream cars no matter what!!!!
Love this progress, been watching your videos since when you started spray painting Jeeps in a tent in your parent's garden. Amazing work guys. Peace!
I've never seen a Paint Booth not contained inside another Building, hopefully it has its own Hvac system
Natural parts cooker lol
They are putting a giant car port over the entire slab I believe they said in an earlier video.
They should have paid for a professional installation
I've seen them outside but generally under a lean-to attached to the main shop.
Main reason people don't have them outside is you have to push a bare steel car from the main shop into a paint booth without getting it wet or dusty or contaminated with tree sap and whatever which means you can't transfer a car in humidity, rain or wind.
@@michaelhyde641no company will install a non certified Chinese paint booth
Congratulations for your new paint booth build.. hope you and your family's successful.. from Malaysia 🇲🇾
Everything is coming together and it looks amazing 👍🏻🙌🏻
I love you guys, how you just get on and tackle absolutely anything is pretty amazing. Keep going guys
You know that flat roof is going to be a big problem. No where for rain and snow to run off.
That booth was meant to be installed inside a building.
You need a canopy over the entire building and fan housing.
Maybe even a shell over the whole project.
You need some professional advice before it’s too late and more expensive.
That cloth covering on the wire is fireproof anti-static covering. I would also recommend using a treated 2x6 stood on edge in the center of the roof then install rockwool insulation in the channels of the roof topped with regular metal roofing panels from center 2x6 to the edges with 6 inch overhang to have a slanted secondary roof that will keep the rain from building up and provide good insulation in the winter.
Not sure why you wouldnt take the time to move one light panel to the other side and swap a couple other panels around so the light is distributed evenly across the booth with 4 light panels on each side.
Because they’re clueless
Because they don’t care. It will probably have to come down since I doubt they got a permit for that huge concrete slab messing up all the drainage that the county made them setup.
I'm not sure if the walls are magnetic but I recommend covering the walls with paper and using magnets to hold them up as an extra layer of protection. I work in a paint booth, and that's the way we do it because the spray on stuff can be hard to remove. Love the videos cannot wait to see the builds go right into paint after body work!!!!
Looking bloody amazing guys great work
Look absolutely sick guys!!, you guys have come a long ways from where yall were, keep up the awesome work, can't wait to see this and the Lamborghini finished!!
Hope you guys build some kind of shed around the paint booth so it's not exposed to the elements. Doesn't look like it would fare well after a few hard storms.
I said the same thing, how do they control the environment, instead Temps will be through the roof with the Sun beating down on that roof and what about the Winter.
@@1one3_Racing you had to include China?
@@nitebird500yep why wouldn’t he. He’s not wrong since that’s where everything is manufactured. People should be pissed
@nitebird500 they order everything from China. Nothing against China. They supply a demand. I just don't know why these boys spend stupid money on a dodgy fibreglass body kit then cheap out on a paint booth that's already started to rust in shipping.
Guys, just getting caught up on your show and hear you reference “silicone” rather than Caulk. Don’t use silicone as it is a fish eye generator and you need to use silicone free caulk. Don’t want to be the bearer of bad new but do not use silicone!!!!!
Attention to detail and hard work. Love this channel.
You guys killing the game 💪🔥🔥🔥
NICE .Well Done Dudes. You Have Wanted And Needed It For Ages. You Have Put In Pure Work. You Well Deserve It. 👍
Keep up the good work guys wish you the best.
You guys came along way.
Remember when you guys was in your parents garage
Dreaming about the position where you guys are now
super motivational
I love the new paint booth, so glad you guy's have your own booth. Good job guy's!
You shouldnt have put the kitchen and fancy sitting area in your workshop, thats where the paint booth shouldve went.
Son los mejores les felicito y los admiro por cómo Son ambos, su canal y todo su variedad en contenido
🎉YESS SIR WE OUT HERE 🎉
Good to see you guys get your own paint booth
The paint booth looks great. I hope the sealant holds up to the weather. Suggestion...spray the roof with white truck bedliner. It will weatherseal it and it will reflect a lot of the heat from the sun.
. Congratulations on the booth. And I cant wait to see the car painted inside.
Exhaust Filters are in backwards! Flip them and they will last 4x longer. Own a filter service and supply company that maintains about 50 booths a month
Love the content! The paint booth looks epic, can't wait to see you guys put it to use! You guys are killing it!
Need to get a decent car port or post frame to cover the booth and protect it from the elements!
I was just in chatt and drove by the shop and saw this!! Yall keep grinding! Saw pops and the pup fiddlin around when we went by!
you a stalker for that one.
Hope you secure that to the ground/pad. A big storm will pick it up and destroy it. Also, secure the ramps, drive tires could spit those ramps out pulling a car in.
why live area were have hurricane and big storm, normal not go live totally wrong area.
Congratulations on your new paint booth..like i suggest long time ago..💪👍⭐⭐⭐⭐⭐
Billy really has turned into the Jack of all trades. He’s a talented quick learning individual. Much respect to the both of you
Jack of all trades? The lights are wrong lol
@@nascarman38n88 its fucking hilarious they didnt fix that in this video. Nope, lets double down and seal it all in rather than fix it properly.
Jack of all trades master of nothing. Lol
I am so happy for you guys, you all deserve it, your own epic paint booth. Man that Lamborghini Aventador is gonna look freaking sick. Nice job, i hope you do the electrical work as well.
After the paint booth is finished painting is going be the most exciting content 😂😂
YES SIRS LOOKS PHENOMENAL! I remember when yall were working out of the family garage; yall came such a long way! congrats : )
Coming along nicely, boys! Do you think it would have been better to have the side door on the other side? It could attach to a little paint-mixing shed. Oh well, it's already assembled! Looks great.
Super happy for you guys.....But I really hope you read some of these comments. There is a lot of helpful info from the filters being upside down to anchoring to it needing to be under another structure to it needing FRESH air in and bad air out. Please follow some of this advice....your return on investment will be a waste if you don't. You youngsters kick ass and are motivated to the moon but patience is a virtue! Good Luck Boys!!
I still believe that paint booth was meant to be set up inside a garage. Pretty sure its not 100 percent weather tight. One option is get a couple of short sea cans and place one to each side of the booth and have trusses built and cover it with a roof and build a back wall. With sea cans this will give you parts storage and whatnots, and the other can could be used as the paint storage and prep/mixing area.
They already said they were building a carport OVER the paint booth.
They really need a separate area to do prep work. Doing it in the storage building is a bad idea.
shouda done the building first that booth galvanised or not WILL rust all the holes , cuts n screws even the sheet.. i worked wiv this stuff most o me working life.
wait see
@@jamief639nobody cares bro
Congrats on the paint booth and thank you for making me a special birthday video! You guys are the best!
Why do I have a feeling an upcoming video will be "we didn't get the permits or approvals, so we have to tear it down".
We can only hope! 😛🍿
Seeing how far you boys have come in the past few years is amazing. Keep it up
are you gona build a structure above and around the paint boot to protect it from the element ???
What about the spray gun, doesn't the paint gun need air pressure from a compressor, so the paint booth could have been built inside a larger prefab steel building, with the paint booth off to one side, and maybe a couple more of those three vehicle hoists, to store more of their builds.
Love You Guys Man.. Been Here For The Long Haul.. Pops Didn’t Let Any Of That Burger Escape..
What a great investment guys. That paint booth looks amazing. I'm sure it will bring you great content, in the future, and it will be so convenient for you future videos. Well done!
Billy boye... You're too cool! Best of luck with the whole project.
I would’ve preferred to have it installed by professionals for the additional 10k, I admire your approach to take it on yourselves. However, you should have left space to the door to add an airlock room where you can enter and exit into for mixing, waiting, storage, supplies, etc. Also a must to anchor the booth now it’s built to prevent shifting under heavy wind. Also I hope they install identical lights on the walls to make it symmetrical as it would bother me especially if it’s a private paint booth. (Also Important to have equal lighting for the painting process) excited for this day to be here but that’s just my observation. Lastly please becareful with the electrical as Simon was correct about flammability. Good luck boys, excited for the next episode.
Sweet Paint Booth guys congrats on finally getting one that is right for the builds.
I agree anchor it to the slab.
Wow you are a genius
Hey make sure you bond the base with a ground because air flow will cause static pressure which causes static shock and static shock can be big enough to ignite paint vapor. So please install ground rods and run a ground and bond the floor frame. Great work keep it coming.
Great to see the booth nearly finished guys.But i didn’t notice you bolt the ramps to the booth.I’m guessing you did off camera tho.Looking forward to seeing it complete and fully wired up.That first flick of the “ON” switch should be epic.Keep the videos coming guys.Great viewing
This is an exciting project! Good work!!
You guys should really work in an slaughter house your butchers skills are unrivalled 😂
Boys your Dad is amazing. He deserves a Special build from you guys. Treat him right please.