Thanx I did the same on my Ford territory 2007 and all went smoothly due to the knowledge and information that you had and give it to who need it I bought 2 remotes from Ebay for 11 dollars You need to do all your keys together in a row or only one will be working
Yes, because you are actually changing the code in the car as well. The car gives the key FOB a new code every time you program it. All you other key FOBs won't open the door anymore.
Cheers man... Workshop charged me $300 for 2 remotes and alarm still didn't work...I went back got my $300 and bought 2 remotes online $17 each. I did the same as you said and was turning key too far. Got it sorted now thanks to your video much appreciated.
After watching a 1000 other videos and still couldn’t figure out why it wasn’t working for me🙈One watch of this video and I’m sorted! I’ve liked this video for safe keeping in the future! CHEERS🍻
My falcon won't unlock at all. Charged the car battery thinking it was dead flat but even after that, my physical key won't even work in the driver's door. Stumped for ideas. Is my issue similar to yours Nicholas?
programmed a new key remote for a BF falcon about a half hour ago and no alarms ect. so far so good. My experience is as follows. closed doors but unlocked. insert key with original remote and turned to first position auxiliary. Radio was off so only the time was displayed. Pressed rear demister three times in quick succession and the door locked. Pressed NEW remote lock and the door unlocked then locked again. Pressed lock on the ORIGINAL remote attached to the key in the ignition and the door unlocked then locked again. Turned the key to the off position and extracted the key. The door unlocked. I then pressed the lock and unlock on the new and original remote to see if they were trained and in sinc. Was successful. My product was from MAPARTS and their web page instructions and my experience only differed in the fact that when I pressed the LOCK buttons while training the remotes that the door unlocked then locked again. In their instructional video it stated that the door would only unlock. Check out their web page if you have the same product. Hope this helped
First click, position is "auxiliary" next is ignition and all tell-tails, lights on dash come on. Do this procedure with key in "auxiliary" position. No light on dash. All doors and tailgate/boot have to be shut properly.
Make the doors are "locked" by that do you mean locked? Or just closed... Does the actuation of the locks that we are looking for go from locked to unlock or the other way around? Still not having any luck. I think there is something wrong in my ICC. I can't get the rear demist or any of the vent control icons to change. Although after a while, the controls start to work. I'm also getting an annoying high pitch squeel through the audio system. Like some capacitor has fried somewhere that would normally be filtering out this noise in electronic system.
All you need to do is turn the ignition on and press the rear demist button 3 times within 5 seconds of turning the key NOT turn the key, scratch ya bum, then press the button 3 times in 5 seconds. The emphasis should be on how quickly you begin pressing the demister button after turning the key. I hope this makes sense?
I get the same problem, after programming, i press lock, and the horn beeps in pulse. the drivers door is locked but not the passenger doors. Opened and closed all doors and boot, same problem.............
Guys any help would be appreciated. I did as mentioned. And once I hit the demist thrice I hear the locking mechanism but after that when I click either of the buttons on the remote it doesnt seem to program. It just stays blank.
Is there all there is to it? There's no need for a computer to program anything? Theres a seller on Ebay called KeysRemotes Brisbane saying they charge 150 to cut and program a key but they say to do these exact steps after I receive the cut and programmed key. Is that just a waste of money?
I'm trying to program a new flip out key for my territory however when I add the 2nd key, the security stops the fuel pump from going on. Any idea what is going on?
@@acmelbourne yep, manage to get the original 2 keys that came with the car, but as soon as I try adding the 3rd new key that o ordered o line and had cut, it doesn't disarm the security measures and stops the fuel pump from turning on
@@ActuallyGoose There might be a limit as too how many keys that can be programed, ring the manufacturer explain to them they might have some advice - other than that, try a professional.
hi from nz my problem is when i try to lock it with remote i get the horn doing that pulsing sound and wont lock it was all working good up till then any ideas be awesome
Why did the horn sound off when you locked the car at the 2:50 mark ? Also if your remote battery was changed and the doors lock and unlock, but sometime the car wont start, what could be the problem, because its got a new battery and in both the remote and the car battery were changed at the same time ?
The horn sounded after hitting one of the buttons (nothing negative) - as for the car not starting that could be a variety of reasons - starter motor could nearing the end, spark plugs, coils, fuel not getting through
The bottom of the icc has the Body Control Module (computer) and is either yellow, blue or red. Keep the original BCM in your car and it will start. To make the radio work press menu and plus buttons simultaneously for 5 seconds
Helps to have a functioning icc and can bus. Don't forget: jump up and down 7 times shake Wang ( counter-clockwise) , while reciting 5 hail Mary's. Failing this, call a priest for an exorcism of the multiple demons which the geniuses at Full Of Rust & Dogshit ,have pre-installed. It's your only hope. The power of Christ compels you!.....
Worked a charm. 2004 AWD. It was the button speed.. I went slow. Now it's Christmas. Thank you mate for your clear quick fix the problem.
Thanx I did the same on my Ford territory 2007 and all went smoothly due to the knowledge and information that you had and give it to who need it
I bought 2 remotes from Ebay for 11 dollars
You need to do all your keys together in a row or only one will be working
Yes, because you are actually changing the code in the car as well. The car gives the key FOB a new code every time you program it. All you other key FOBs won't open the door anymore.
Thanks mate, huge help¡ I was having a hard time with mine until I watched this video.
Every time I program a remote I immediately look for you
Cheers man... Workshop charged me $300 for 2 remotes and alarm still didn't work...I went back got my $300 and bought 2 remotes online $17 each. I did the same as you said and was turning key too far. Got it sorted now thanks to your video much appreciated.
After watching a 1000 other videos and still couldn’t figure out why it wasn’t working for me🙈One watch of this video and I’m sorted! I’ve liked this video for safe keeping in the future! CHEERS🍻
Good one bloke. I'm just about to go do my BF, did it a while back but completely forgot the procedure, thank god for youtube.
Cheers mate, every other link failed to say to just turn it one notch without the accessory lights.
I wish I'd just watched this video 1st 👍👍👍
Thanks Matey, that was easier than the 4 easy instructions that came with the remotes that I've lost. Cheers!
Excellent video , saved me bucket loads of money
Thank you very very much! It fixed my non working key with a new battery and your method!😀✌️
My falcon won't unlock at all. Charged the car battery thinking it was dead flat but even after that, my physical key won't even work in the driver's door. Stumped for ideas. Is my issue similar to yours Nicholas?
holy shit thanks bro, other people are saying you need the old buttons but you dont
Tried a couple times but it worked and in my territory as well. Cheers for the video mate 👍
Does this work on ford territory 2014?
Thanks for the video saved me mechanic trip
Thanks a lot. I just bought a ba falcon. The the car. Thanks heaps for all your videos. Has been a great help.
Thank you, thank you, thank you. Tried other so called instructions, failed about 20 times. Dancing 😿🤒👏🏼
Thanks for the demister timing advice
programmed a new key remote for a BF falcon about a half hour ago and no alarms ect. so far so good. My experience is as follows. closed doors but unlocked. insert key with original remote and turned to first position auxiliary. Radio was off so only the time was displayed. Pressed rear demister three times in quick succession and the door locked. Pressed NEW remote lock and the door unlocked then locked again. Pressed lock on the ORIGINAL remote attached to the key in the ignition and the door unlocked then locked again. Turned the key to the off position and extracted the key. The door unlocked. I then pressed the lock and unlock on the new and original remote to see if they were trained and in sinc. Was successful. My product was from MAPARTS and their web page instructions and my experience only differed in the fact that when I pressed the LOCK buttons while training the remotes that the door unlocked then locked again. In their instructional video it stated that the door would only unlock. Check out their web page if you have the same product. Hope this helped
I had the exact same experience as you described
Thank you so much just fixed my remote not working legend
Youve guided me twice subscribing now lol.. keep up the good work .. i love my barra
Awesome works perfectly now cheers cobba
First click, position is "auxiliary" next is ignition and all tell-tails, lights on dash come on. Do this procedure with key in "auxiliary" position. No light on dash. All doors and tailgate/boot have to be shut properly.
Thank you your video really helped me out.
Thanks mate, this is very useful information. I try it on ford falcon 2005 and it works owsm thanks agian
Finally a video that is explained 100% that worked for me, your a legend thankyou. Happy days cheers mate
Those instructions are IN THE FALCON MANUAL THAT COMES WITH THE CAR.
Make the doors are "locked" by that do you mean locked? Or just closed...
Does the actuation of the locks that we are looking for go from locked to unlock or the other way around?
Still not having any luck.
I think there is something wrong in my ICC. I can't get the rear demist or any of the vent control icons to change. Although after a while, the controls start to work. I'm also getting an annoying high pitch squeel through the audio system. Like some capacitor has fried somewhere that would normally be filtering out this noise in electronic system.
Worked perfectly. Thankyou.
Worked like a treat, cheers mate
Thanks mate exactly what I was looking for
you're legend mate, thanks.
When I unlock the driver's side door the others still stay locked can I get rid of that if I buy a new one of these ?
Your a life saver
You are a bloody legend.thanks
Thanks mate. Was beginning to feel like a complete goose. Sorted. Cheers
I did and it worked thank you
Excellent job, I did it. Thanks
Thanks bro worked for me
Sweet thank you I was totally doing the same thing.
Thanks lad 🎉
Thankyou very much
All you need to do is turn the ignition on and press the rear demist button 3 times within 5 seconds of turning the key NOT turn the key, scratch ya bum, then press the button 3 times in 5 seconds. The emphasis should be on how quickly you begin pressing the demister button after turning the key. I hope this makes sense?
Too funny.... this description made so much sense to me... scratch ya bum....
What if its cycling, but the key fob still does not work, the key fob looks brand new, please help me ?
I get the same problem, after programming, i press lock, and the horn beeps in pulse. the drivers door is locked but not the passenger doors. Opened and closed all doors and boot, same problem.............
So I got it to work but it won’t lock
It locks then unlocks a light flash with the horn twice
Guys any help would be appreciated. I did as mentioned. And once I hit the demist thrice I hear the locking mechanism but after that when I click either of the buttons on the remote it doesnt seem to program. It just stays blank.
maybe the battery is flat or very low in your remote
Very good help👍
works well :) good video
Can that effect startin. Cos mines bit shit
awesome
Thanks mate. Helped a lot
Is there all there is to it?
There's no need for a computer to program anything?
Theres a seller on Ebay called KeysRemotes Brisbane saying they charge 150 to cut and program a key but they say to do these exact steps after I receive the cut and programmed key. Is that just a waste of money?
I'm trying to program a new flip out key for my territory however when I add the 2nd key, the security stops the fuel pump from going on. Any idea what is going on?
Nah! never heard of it before have you tried reprograming the key.
@@acmelbourne yep, manage to get the original 2 keys that came with the car, but as soon as I try adding the 3rd new key that o ordered o line and had cut, it doesn't disarm the security measures and stops the fuel pump from turning on
@@ActuallyGoose There might be a limit as too how many keys that can be programed, ring the manufacturer explain to them they might have some advice - other than that, try a professional.
How do I do this without old key
It is kinda similar for ford territory? Ty
Whats the differance?
hi from nz my problem is when i try to lock it with remote i get the horn doing that pulsing sound and wont lock it was all working good up till then any ideas be awesome
No Idea - is there a crossed wire??
Hey, I’ve got the same issue. Did you figure out how to fix that? I’m very confused and any help would be great!
Done. Thanks
Thanks allot mate!
What if all my buttons work except the lock button? It locks then unlocks and beeps
same problem here
thanks
Just wondering if this works on a ba ford Fairmont ghia, with dual zone climate control etc
Give it a shot, let us know the end results
@@acmelbourne just did mine with dual zone cilmate, worked fine
Why did the horn sound off when you locked the car at the 2:50 mark ? Also if your remote battery was changed and the doors lock and unlock, but sometime the car wont start, what could be the problem, because its got a new battery and in both the remote and the car battery were changed at the same time ?
The horn sounded after hitting one of the buttons (nothing negative) - as for the car not starting that could be a variety of reasons - starter motor could nearing the end, spark plugs, coils, fuel not getting through
No worries champ, thanks. :)
It does that if your door is not closed properly
Becuase the key is ignition
So I tried to install a new icc and the car wouldn’t start. Was that because I didn’t program the key as shown?
The bottom of the icc has the Body Control Module (computer) and is either yellow, blue or red. Keep the original BCM in your car and it will start. To make the radio work press menu and plus buttons simultaneously for 5 seconds
I dunno wen U say be it tried too and it works also a second keypad awesome
Anyone know how to do this with the Kayhan head unit?
Do you know how to open the tailgate on a BF wagon when the electronic switch on the dash don’t work ?
If the manual key opening isn't an option, sometimes access to boot via back seat, once inside their is an emergency option that opens inside the boot
good man
Does this work for ford territory 2014?
Give it a try
Thanks Mate
this is setting up a remote (or fob), not a key
That’s not a key it’s a remote transponder ! A key goes in a lock,,,,,
thanks mate work good
Thanks that was easy.
Cheers mate
Thx very much
Mine still didn’t work
That's not a key, that's the remote
That's not programming the key, its programming the key fob. Misleading info...nonetheless good info
Need to change the title. You programmed a key fob/remote, not a key
That car he is in ,is either a ex cop car or some idiot put something where those 3 screws are or bolts?
Helps to have a functioning icc and can bus. Don't forget: jump up and down 7 times shake Wang ( counter-clockwise) , while reciting 5 hail Mary's.
Failing this, call a priest for an exorcism of the multiple demons which the geniuses at Full Of Rust &
Dogshit ,have pre-installed.
It's your only hope.
The power of Christ compels you!.....
my demist button doesn't work
Why do you keep on talking about Key Programing ...It's a Remote Control ...FFS !!
thank you! worked fine!
Cheers mate