Such beautiful lamps as usual. It warms my heart when I watch these woodworking projects and you use the flat carpenter's pencil. It reminds me of my late father who used to be a carpenter 😔
Oi meu nome é Fábio sou fã do seu trabalho e tudo muito sutil é belo. ficaria muito grato se mim fala-se sobre todo seu material, digo seus produtos que usa em seu trabalho você mim motivou a fazer isso claro quando aprender mais. obrigado.
How do you not have tons of micro bubbles? I'm having issues... no matter how slow i mix and pour and no matter what room temp or epoxy temp or humidity level is, I have tiny tiny bubbles. What am I doing wrong?
Great work!!! However, I recently read that fairy lights do not have a long life. What do you suggest when the lights need replacement. Thanks WillieThePenMaker
You're such an inspiration man!!! Love the works! A noob question here but could you let one part of the our dry before pouring another part without it leaving cracks of telltales? So for example id pour 2cm, dry jt completely and pour another 2cm. Will it show? Thanks!
I have done a multiple pour using a beer can with the top cut off as a mould, a did one were I just filled the can and it was fine, I did another one leaving layers to cure and you could clearly see a line between each pour, it looked like when they pour cement in moulds to build towers
I'm sure there is some math and measurements that could give a pretty accurate volume. However my wife and I just estimate and we have some small silicone molds on hand for any excess resin that gets mixed so that it doesn't go to waste.
After cutting inside part dip that in bucket full of water and measure the water it displace then all you need is your epoxy resin density and some calculation For example: if your work pice displace 10g watter (lets assume your resin have 1.3g/cm density) all you have to do is simply minis 30% weight and mix resin in this example resin is 30% dence then water means 0.30g/cm For other density resin you have to do some math .....😁 Here some types of resins and densities MaterialDensity (gcm3) Epoxy 1.1-1.4. +30-40% then water Polyester 1.2-1.5. +20-50% then water Vinyl Ester 1.1-1.4. +10-40% then water CaCO 2.7. +270% then water Al(OH) 2.42. +240% then water Catalyst 1-1.1. +0-10% then water Accelerator 0.9-1.1. -10% +10% then water just minus the +% from resin waight and whola you have exact amount of resin you want PS : please dont ask for LBS or Oz measurements 😁😁😁😁😁😁😁😁
Going by the annoying plucky guitar music I'm going to presume you're either in the US or the UK. Gods know why you people think it's great for. ..Everything. It's just annoying.
An innovative thought that combines lamp and animals!
These videos are the only ones that help me sleep I love them
LOVE LOVE LOVE the hammer lamp! So clever!
Good job you are so talented ❤️🎆🎇🎊 keep doing what you do God bless you 🙏
Such beautiful lamps as usual. It warms my heart when I watch these woodworking projects and you use the flat carpenter's pencil. It reminds me of my late father who used to be a carpenter 😔
Brilliant 👏. Easycomposites glasscast
Absolutely beautiful!
These epoxy projects are cool
Love Love Love them
I love you work
The last one is Gorgeous I would buy that for sure
I like the video.
All lamps looks great.
I like best is the last lamp !
A great design.
Very cool! I have started using resin recently! I have a lot to learn. Channels like yours make it look so easy!
Very original and beautiful.
You inspire me to create art pieces
I think you should melt the butterfly project I think it would look sweet
All are super
I want to follow it
Expect more. Keep going bro
Omg i love the butterfly!!
Thanks 👍
But wasn't it a real butterfly?
Ficou muito bom!!
great work
My little niece has her room decorated with butterflies, I think I'll make her the butterfly lamp.
Jabrdast
love your ideas
Very Nice
Beautiful♡
Very good video. I like your style..
Excellent. You have given me loads of inspiration. Thank you. I have subscribed. 🇬🇧👍
hi it will be nice to ade reference for the LEDs thanks
Brilliant !
Excelente resultado y como se llama ese plástico transparente con que hizo la forma amistad ?
Oi meu nome é Fábio sou fã do seu trabalho e tudo muito sutil é belo. ficaria muito grato se mim fala-se sobre todo seu material, digo seus produtos que usa em seu trabalho você mim motivou a fazer isso claro quando aprender mais. obrigado.
Thank you 🤟🏻❤️ lovely...
How do you not have tons of micro bubbles? I'm having issues... no matter how slow i mix and pour and no matter what room temp or epoxy temp or humidity level is, I have tiny tiny bubbles. What am I doing wrong?
Very inspiring
Parabéns pelo talento! 👏👏
Where is buy the masking tape, ?
I need one
Great work!!! However, I recently read that fairy lights do not have a long life. What do you suggest when the lights need replacement.
Thanks
WillieThePenMaker
Very nice
cool .. and the music so beautifull .. what the name of music
Muy bonito
You're such an inspiration man!!! Love the works! A noob question here but could you let one part of the our dry before pouring another part without it leaving cracks of telltales? So for example id pour 2cm, dry jt completely and pour another 2cm. Will it show? Thanks!
I have done a multiple pour using a beer can with the top cut off as a mould, a did one were I just filled the can and it was fine, I did another one leaving layers to cure and you could clearly see a line between each pour, it looked like when they pour cement in moulds to build towers
but he killed an innocent butterfly thats not cool .. hes a murderer
Beautiful! Where I can buy material for this?
Están preciosos, que material es el transparente y flexible? Gracias
Saludos desde Colombia
This is plexiglass, acrylic sheet
@@mbresinart gracias
@@mbresinart Y la resina es la que se usa para fibra de vidrio?
The gel name Enna, what is the gel name
What cutting tool is that?
So cool! What about pinning the fairy lights down in constellation formations in the resin?! Cassiopeia, Gemini, Orion etc etc
Super tare 🌽🌽🌽🌽🌽
Great desings! What are your sanding steps before polising? (For example 80,120, 240 and so on)
80, 100 , 120, 150, 180, 240 , 320, sanding with water 400 , 600 , 800, 1000, 1200, 1500, 2000, 2500 , 3000
@@mbresinart thanks!!
A hammer nailing itself. What would Sigmund Freud say. 😮🔨 🤣🤣🤣
Great work 🙏🏻👍🏻
Cold white or warm white led? What is better?
I used cold LED
Great lamps, can I ask why you oil the wood before the final polish, is there a specific reason for this?
That's really cool and all but ,what do you do if one of the led lights burns out?
if one led light burns out the rest will work
@@mbresinart What if all of them go, you have no way of changing the lights out right?
Awesome work, how does one calculate the amount of resin and hardener to use with those unusual shapes ?
I'm sure there is some math and measurements that could give a pretty accurate volume. However my wife and I just estimate and we have some small silicone molds on hand for any excess resin that gets mixed so that it doesn't go to waste.
After cutting inside part dip that in bucket full of water and measure the water it displace then all you need is your epoxy resin density and some calculation
For example: if your work pice displace 10g watter (lets assume your resin have 1.3g/cm density) all you have to do is simply minis 30% weight and mix resin in this example resin is 30% dence then water means 0.30g/cm
For other density resin you have to do some math .....😁
Here some types of resins and densities
MaterialDensity (gcm3)
Epoxy 1.1-1.4. +30-40% then water
Polyester 1.2-1.5. +20-50% then water
Vinyl Ester 1.1-1.4. +10-40% then water
CaCO 2.7. +270% then water
Al(OH) 2.42. +240% then water
Catalyst 1-1.1. +0-10% then water
Accelerator 0.9-1.1. -10% +10% then water just minus the +% from resin waight and whola you have exact amount of resin you want
PS : please dont ask for LBS or Oz measurements 😁😁😁😁😁😁😁😁
@@sanb3586 Wow, thanks for the detailed intel
Hope it helps sorry for English 🙄❤️👍🙏
If I remember there's a channel that uses a resin calculator. I can't remember which but it's super helpful
What do we do after the led “xmas” lights go off for good? Is it inside the resin right?
cannot be replaced because they are in resin
This is amazing, unfortunately epoxi is expensive here In Brazil ☹️
It's expensive everywhere bro
Wow
جميل استمر مبدع💕👏💕
nice😊🌼❤️
What kind of tape is that and can I get a link for it? (The tape that goes over the wood, before the resin)
makes a resin sword. 🇧🇷✌
Good idea👍
@@mbresinart yes my friend
@@roselysilva5351 I will try to make next week🙂
@@mbresinart ok
Nice job bro, A big question where can i get that lights and what is that kind´s lights
Amazing ❤❤❤I love it ..thanks..can I try to do your lamp..
請問版大 台灣哪裡買的到這種樹脂
Nice 🌟🌟👍
Amazing job ! But without gloves ?!?! Good exemple xD
Top
تسلم ايدك
👌👌👌
Como faço para comprar?
Algum site?
Thank god for fast forward
hello, what are these lights name, how can I reach
Fairy LED lights
Good work 👍,. Where you buy the led lights?
Amazon
@@mbresinart thanks
جميل👏👏👏👍
Hello sir how to contact for you
Hello can you tell me where I can find this pretty butterfly drawing and congratulations for your superb achievement.
thanks again
❤❤👌👌👍👍👍👌
❤
Уровень 9 класс урок труда
what name a lamp sir?
14:00 and all i could think is this poor guy is about to drill through his thumb...
Лампу с бабочкой надо было поярче сделать все таки
👍👏😍
The artwork is awesome, but am I really the only one who is worried about him not securing whatever he cut with a saw etc?
El silicón se desprende fácilmente con alcohol
Hola, sabes los números de lijas que usaron? Gracias
The 183 dislikes are just people that are jelly bc they can't make them🤩
whats the difference between a butterfly and a dog? nothing they both live he killed the butterfly youre all killers
Some Brazillian?
it`s a real buterfly?😢
Работы хорошие, но видио очень длинное. Зачем всякий раз показывать замес смолы и шлифовку изделий?
❤💗💋💯👍🌹🙏
Going by the annoying plucky guitar music I'm going to presume you're either in the US or the UK. Gods know why you people think it's great for. ..Everything. It's just annoying.
👍🙏🏻❤️
ohh and killed a butterflie just for a lamp 🥵
Send me one plz
First!
Why does every youtuber english AND german titled videos?
Far from amazing, seem to show a distinct lack of imagination
u butterfly killer :(
69th comment.
Ko
There’s a gay behind it